Disposal instructions. Product Disposal Instructions (For EU member states and other European countries where separate collection rules apply) Company packaging waste

Order of the Minister of Defense of the Russian Federation "On the organization in the Ministry of Defense of the Russian Federation of work on the disposal and use of released weapons, military equipment and ammunition" dated 01.01.01 No. 000

For the purpose of centralized organization in the Ministry of Defense of the Russian Federation of work on the disposal and rational use of weapons, military equipment and ammunition released (excessive or unused due to physical or obsolescence, as well as liquidated in accordance with international treaties) from the Armed Forces of the Russian Federation, I ORDER:

1. The general management of work on the disposal and use of released weapons, military equipment and ammunition shall be entrusted to the Chief of Armaments of the Armed Forces of the Russian Federation - Deputy Minister of Defense of the Russian Federation.

2. To entrust the Chief of Armaments of the Armed Forces of the Russian Federation - Deputy Minister of Defense of the Russian Federation with organizing the preparation and approval of the annual summary list for the Ministry of Defense of the Russian Federation of weapons, military equipment and ammunition released from the Armed Forces of the Russian Federation, subject to liquidation in accordance with international treaties, recycling outside the framework of contracts and sales in the domestic and foreign markets.

3. General customers of the Ministry of Defense of the Russian Federation

46. Components of missile and rocket-space complexes: command posts, equipment of command posts;

target designation nodes, equipment of target designation nodes; complexes of measuring instruments, collection and processing of information; strategic command posts; command posts, missile defense target designation units; strategic missiles; combat stages of strategic missiles;

mine launchers of anti-missile systems, transport and installation means of anti-missiles.

47. Components of launch complexes of missile systems and launch vehicles.

48.Equipment of components of launch complexes.

49. Launchers of guided missiles, space missiles, unmanned aerial vehicles and their components.

50. Components of technical complexes of missile systems and launch vehicles.

51.Equipment of components of technical complexes of missile systems and launch vehicles.

52. Ship combat launch complexes and their components.

53.Complexes of ground technological equipment and complexes of loading facilities.

54. Means of complexes for measurements, collection and processing of information during launches of rockets and space rockets.

55. Guided missiles, anti-missiles, cruise missiles, launch vehicles, their components, warheads (modules) for them.

56. Rocket engines and their components.

62. Aircraft gliders. Aircraft engines of combat aircraft, helicopters and unmanned aerial vehicles.

63. Aerospace engineering for military purposes.

64. Spacecraft.

65. Airborne complexes (systems) and elements.

66.Designs of space vehicles.

67. Overclocking blocks, their components.

68. Components of assembly-protective blocks.

69. Technical complexes of orbital vehicles and their components.

70. Equipment of components of technical complexes of orbital means.

71. Technical means of reconnaissance space.

72. Warships and boats: submarines; aircraft carriers; cruisers;

destroyers (destroyers);

patrol ships;

landing ships;

combat boats;

ships with dynamic support principles;

mine-sweeping ships;

anti-submarine ships.

73. Special purpose ships and support ships: control ships;

reconnaissance ships; anti-sabotage ships; search and rescue submarines; special courts; training ships.

74. Technical means of reconnaissance ship, ground.

75. Complexes of control of orbital means.

76. Systems and means of ground control complexes for orbital means and their components.

77. Special complexes - complexes of information-measuring equipment for special purposes.

78. Systems and means of special complexes.

79.Complexes of landing and maintenance of space rockets.

80. Systems and means of complexes for landing and maintenance of elements of space rockets.

81. Tanks, tracked and wheeled combat vehicles, self-propelled artillery and anti-aircraft installations, engineering barrier vehicles, special military vehicles.

82. Components and accessories for rocket and space engines.

83. Special equipment for maintenance, repair and testing of torpedoes.

84. Special equipment for the maintenance, repair and testing of depth charges and sea mines.

85. Special equipment for the maintenance, repair and inspection of ammunition.

86.Special equipment for the maintenance, repair and testing of rockets

87 Special equipment for workshops for the repair and maintenance of weapons and military equipment. 88. Equipment (complexes) of security communications.

89 Classification equipment and its components.

90 Radio and telecommunication technology:

automated communication systems, communication systems of complexes of means of automation of control (KSAU) formations;

hardware mobile units of military communications;

communications centers for command posts of missile and artillery formations, resident means of communication for command and staff vehicles (CSV) and autonomous automated workplaces for commanders (AARM);

means of direction finding, radio reconnaissance, television reconnaissance;

start-command posts, ground-based aviation drive radio stations;

ground and airborne stations for radio reconnaissance, direction finding and radio interception, radio nodes for receiving intelligence information;

airborne radio receivers and communication centers, broadband radio links of aviation complexes;

complexes, stations and equipment for reconnaissance of communication lines and radio countermeasures for space and aircraft.

91. Ground communication technology: automated control systems; radio transmitters, radio stations; command and staff vehicles, machines and control units; radio relay stations, radio receiving nodes, radio control points and

radio receivers;

means of telegraph and telephone communication;

encryption communication equipment;

cable communication lines;

means of mechanization, power supply and repair;

educational equipment, prototypes of equipment.

92. Systems, complexes and means of automated control: command systems of combat control; computer systems (VC) and computers; analog computer technology;

automated workstations; data exchange systems;

subscriber stations and data transmission equipment; equipment and separate devices for VK and computers;

equipment and individual devices for analog computing;

means of documenting and replicating information; equipment and technical property.

93. Radio navigation equipment:

positioning and orientation systems on land and at sea;

mobile radio receivers, direction finders and means of communication of the Navy;

equipment for near and far navigation;

aviation radio navigation equipment;

positioning and orientation systems over land and sea;

radio equipment for autonomous navigation;

fighter control and guidance systems;

Doppler velocity and drift angle meters for aircraft.

94. Radar systems and equipment: radar stations of the missile warning system

attack (SPRN) and their components;

complexes of means for transmitting, receiving, displaying and documenting early warning information;

radar and radio-optical complexes of the space control system;

radar stations for detection, guidance and target designation;

state identification equipment.

95. Sonar equipment.

96. Control and measuring devices, repair and measuring devices, other radio equipment of the Navy.

97. Night vision equipment (active and passive).

98. Products of quantum electronics - laser systems for special purposes.

100. Means of hydroacoustic suppression.

101. Ground reconnaissance technical means.

102. Equipment for automated data processing of the main purpose:

special purpose data processing systems;

multiprocessor computing systems;

special electronic computers, portable computers, special computers for digital data processing, microcomputers, special onboard computing systems and computers, neurocomputers, special processors;

functional devices (processors, input / output devices, auxiliary devices) that implement specialized functional tasks.

103 Special purpose data processing systems.

Application notes

The nomenclature of groups of weapons, military equipment and ammunition released from the Armed Forces of the Russian Federation (hereinafter referred to as AME) establishes a list of the main similar groups and classes of AME samples, their components and components that are unsuitable for their further use for their intended purpose due to moral or physical wear and tear, the free sale of which is prohibited, and subject to liquidation and disposal within the framework of the state defense order or sale in the domestic and foreign markets.

This list of weapons and military equipment is intended to guide the work and is mandatory for execution in the branches of the Armed Forces of the Russian Federation, branches of the Armed Forces of the Russian Federation, military districts (navies), main and central departments of the Ministry of Defense of the Russian Federation and other military command and control bodies involved in planning, organization and provision of work on the disposal and sale of weapons and military equipment and other movable military property.

On the basis of this list, the military command and control bodies of the types of the Armed Forces of the Russian Federation, the branches of the Armed Forces of the Russian Federation, the main and central departments of the Ministry of Defense of the Russian Federation, which are the general customers of weapons and military equipment in their nomenclature, are formed and annually submitted by September 15 to the Office of the Chief of Weapons of the Armed Forces proposals agreed with the Main Organizational and Mobilization Directorate of the General Staff of the Armed Forces for a consolidated list of weapons and military equipment released from the Armed Forces for the next planned year (in the form of Appendix No. 1 to this order).

An extract from the approved consolidated list under section III (in the form of Appendix No. 1 to this order) is sent to the Main Directorate for International Military Cooperation of the Ministry of Defense of the Russian Federation.

HEAD OF CHIEF

ORGANIZATIONAL AND MOBILIZATION MANAGEMENT

OF THE GENERAL STAFF OF THE RUSSIAN ARMED FORCES

FEDERATION Colonel General

V. Putilin

HEAD OF DEPARTMENT OF THE HEAD OF ARMAMENTS

ARMED FORCES OF THE RUSSIAN FEDERATION

lieutenant general

N. Baranov

With the exception of military equipment sold through the Central Directorate of Material Resources and Foreign Economic Relations of the Ministry of Defense of the Russian Federation in the prescribed manner.

MANUAL
AND MAINTENANCE

Saladettes

Product Disposal Instructions
	(For EU Member States and other European countries with separate waste collection regulations)
	This symbol on the product itself or in the reference documentation means that the equipment must not be disposed of with normal household waste at the end of its useful life. In order to prevent negative impacts on the environment and human health resulting from inappropriate disposal of the product, as well as to conserve natural resources and encourage the reuse of materials, please recycle this product separately from other waste. To dispose of the product for commercial users, please contact the supplier and clarify the terms of the supply contract. This equipment cannot be disposed of with household waste.

TERMINAL TERMINALS (12 and 230 V) 1-2 normally closed compressor relay 1-3 compressor normally open relay 6-7 power supply: 230 V model: 3 VA maximum; 12V model: 1.5VA maximum. 8-9 thermostat probe connection (sensor 1) NOTE: Default settings are shown. The relay capacity is indicated on the rating plate. The diagram shows relay contacts 8(3) A 250 V for a 12/230 V network.
MODEL 16A 2hp 2 normally open compressor relays 6-7 power supply 8-10 thermostat probe connection (sensor 1) A TTL port for copy card

	LIMITATION OF LIABILITY This manual and its contents are the property of Eliwell & Controlli s.r.l. and may not be copied or distributed without proper permission. We have made every effort to ensure that the instructions contain the most accurate and complete information about the product. Despite this, Eliwell & Controlli s.r.l., as well as its employees and suppliers, are not responsible for the consequences of its use. Eliwell & Controlli s.r.l. reserves the right to make changes to the instructions without prior notice.

SALADETTA

INTRODUCTION

The equipment, hereinafter referred to as "REFRIGERATOR" or "SALADETTA", is manufactured in accordance with EU standards in the field of free movement of commercial and industrial goods on the territory of the EU member states, as well as in accordance with the Directives of the European Parliament and the European Council No. 2004/108/ EC EMC, No. 2006/95/EC for Low Voltage Equipment and No. 2002/95/EC for the Restriction of the Use of Hazardous Materials in Electronic and Electrical Products.

The equipment is supplied with the documentation required by the standards and directives listed above.

The equipment is extremely safe to use. Factors that can lead to a significant deterioration in the safety of the equipment include the removal of electrical protection devices or other protective devices, as well as failure to follow the instructions for installation and connection to the mains. The equipment must be used in strict accordance with the requirements of this manual, so you must carefully read the instructions for its installation, connection and dismantling (when moving to another place of operation).

It is recommended that you pay particular attention to the instructions given later in the manual. Compliance with relevant standards and requirements will ensure high safety of the product during transportation and operation. Maintenance work involving a number of simple operations must be carried out by qualified personnel. To ensure maximum durability and minimum operating costs, all instructions in this manual must be carefully followed.

USING THE MANUAL

The operation and maintenance manual is an integral part of the refrigerated counter. The manual must be kept intact throughout the life of the equipment and also if the equipment is transferred to another owner.

The manual should be kept close to the equipment so that operators and maintenance personnel have constant access to it.

The equipment is delivered complete with the necessary documentation in accordance with the requirements of current regulations, observed at the design and production stage.

This manual is intended for operators and qualified technicians and contains instructions for the safe and correct installation, connection to networks, operation and maintenance of the equipment.

This manual contains all the information necessary for the safe use of the equipment.

MANUAL STORAGE

The manual must be handled with care to prevent damage.

The user is under no circumstances allowed to remove or modify individual sections of the manual.

The manual must be kept in a place protected from moisture and high temperatures, near the equipment, so that operators can obtain the necessary information at any time. After each consultation, the manual should be returned to its storage location. Moreover, it is necessary to keep the manual for the entire life of the equipment and, if the equipment is transferred to another owner, to transfer the manual along with it.

The manufacturer is not responsible for damages resulting from breakdowns, accidents or equipment failures resulting from non-observance of the instructions given in this manual. In addition, the manufacturer is not responsible for the consequences of unauthorized modification of existing or installation of new unintended components of the equipment.

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES TO PRODUCT SPECIFICATIONS WITHOUT PRIOR NOTICE.

DESCRIPTION OF THE EQUIPMENT

This manual applies to refrigerated counters designed for the storage of food in packaging and without it, with the following characteristics:

2 or 3 doors;

blind doors with magnetic seal;

guides for gastroyemkost;

electronic controller and main switch;

power supply parameters: 230 V - 1 phase - 50 Hz.

The front panels and internal elements are made of AISI 304 stainless steel, the bottom elements are made of galvanized steel. The bathtub is insulated with polyurethane foam with a density of 38–42 kg/m 3 . Connection to the electrical network is carried out by means of a power cable provided by the manufacturer.

SALADETTA 2P (2 doors)

Designation	Description
S 02 E	Stainless steel cover
S02A	Work table and board
SL02NX
SL02GR	Granite work table
SL02VD	Flat glass showcase
SL02VC	Curved glass showcase
SL02AI
SL02C6
SL02C6VR4	6 drawers, granite worktop, refrigerated display case

SALADETTA 3P (3 doors)	TN temperature from +4 to +10 °С

Designation	Description
SL 03 EKOGN	Stainless steel cover
SL03NX	Stainless steel work table
SL03AL	Work table and barrier
SL03GR	Granite work table
SL03VD	flat glass
SL03VC	curved glass
SL03AI	Granite worktable, barrier, holds 5 GN 1/6 gastronorm containers
SL03C6	6 drawers, granite worktop

SELECTING THE INSTALLATION LOCATION
CLEANING INSTRUCTIONS
POWER CONNECTION AND GROUNDING
SAFETY RECOMMENDATIONS
MAINTENANCE

must be carried out by qualified technical personnel.

1. SELECTING THE INSTALLATION LOCATION

Transportation
Equipment unloading
Package
Condensate drain/drain connection
Leg height adjustment
Field installation / distance from walls
Refrigerated counter with built-in refrigeration unit and without it

2. INSTRUCTIONS FOR CLEANING

Cleaning the refrigerated counter
Cleaning the condenser unit

3. POWER CONNECTION

Electrical connection
Turning on the refrigerated table

4. RECOMMENDATIONS FOR THE OPERATION OF THE EQUIPMENT

Defrosting

Food storage

5. MAINTENANCE

6. ELECTRONIC CONTROL PANEL

7. TECHNICAL DATA

Rating plate
Description of the components
Versions: with integrated cooling unit
Dimensions and weight

8. ELECTRICAL DIAGRAM

1. SELECTING THE INSTALLATION LOCATION

Before carrying out loading/unloading and installation work on site, please read the relevant sections of this Operation and Maintenance Manual carefully. Pay special attention to the overall dimensions and weight of the equipment, instructions for handling operations, draining condensate, adjusting the height of the legs and using the refrigerated table controller.

1.10. TRANSPORTATION

It is not allowed to stack tables on top of each other (except when the tables are packed in rigid containers).

1.15 UNLOADING THE EQUIPMENT / DIMENSIONS / WEIGHT

1.20. OPENING THE PACKAGING

Remove the container and unfasten the table from the shipping pallet. Install the table in place of operation and remove the protective film from the steel surfaces.

Product waste

Waste products with hazardous properties are classified as hazardous waste according to waste legislation. They must be taken to a hazardous waste collection point, such as a municipal hazardous waste collection point.

Product waste with hazardous properties is easily identified from the warning symbol or product hazard phrases on the product label.

Expired beauty products such as skin care creams are a class of mixed waste. However, unused hairspray in an aerosol bottle is hazardous waste.

Their collection at collection points is free for households.

Consumer packaging waste

empty

Aerosol cans

Completely empty

Households in Finland can find suitable collection points through the RINKI website. For more information about packaging waste and where to find your nearest collection point, visit the RINKI website

Waste packaging companies

The plastic packaging of KiiltoClean Oy is made of polyethylene (PE-HD 02), polypropene (PP 05) or polyethylene terephthalate (PET 01).

empty plastic and carton packaging can be recycled at collection points or disposed of as energy waste.

Aerosol cans or other pressurized packaging are classified as hazardous waste. Unused aerosols must be taken to hazardous waste collection points.

Completely empty(when pressed, nothing splatters or sprays) pressurized metal packaging can be handed over to special containers for collecting metal waste.

Empty bags disposed of as energy waste or mixed waste.

Empty IBC containers processed through Paketo Oy. Additional Information

metal containers are returned to KiiltoClean Oy in accordance with the procedure outlined in the instructions for use.

It is recommended that companies sign a waste management agreement with a local operator who can provide instructions on the correct disposal or recycling method. Companies in Finland can also use RINKI terminal points. In such cases, the company must sign a special agreement with RINKI about the company. For more information, visit the RINKI website.

1.1 This instruction was developed in accordance with the Federal Law of June 24, 1998 No. 89-FZ “On production and consumption waste” and “Temporary rules for environmental protection from production and consumption waste in the Russian Federation”, approved by the Min. Nature of the Russian Federation 15.07.94

1.2. This instruction defines the legal framework for handling production and consumption waste in order to prevent harmful effects on human health and the environment and the involvement of such waste in economic circulation as additional sources of raw materials.

2. Scope

2.1. This instruction establishes the procedure for accounting and control over the formation, collection, storage, transportation, use, disposal and disposal of production waste.

2.2. This instruction defines the duties of the personnel and heads of structural divisions and is mandatory for execution by the heads and specialists of the enterprise.

3. Terms and abbreviations

AKB is a rechargeable battery.
GZH - flammable liquids.
Flammable liquids - flammable liquids.
OMTS - department of material and technical supply.
OOTEiN - department of labor protection, ecology and supervision
OGM - department of the chief mechanic.
OGE - department of the chief power engineer
OS - the main means.
MPC - maximum permissible concentration.
PPE - personal protective equipment.
Coolant is a cutting fluid.
MSW - solid household waste
TMC - inventory items.
CA - central warehouse.

4. Collection and disposal of waste

4.1 Formation, collection and disposal of enterprise waste are an integral part of the technological process.

4.2 All wastes are divided into the following hazard classes according to the degree of impact of harmful substances on the human body:

Class I - extremely hazardous waste;
Class II - highly hazardous waste;
Class III - moderately hazardous waste;
Class IV - low-hazard waste;
Class V - practically non-hazardous waste.

4.3 The activities of all divisions of the enterprise should be aimed at reducing the volume (mass) of waste generation, the introduction of waste-free technologies, and the conversion of waste into secondary raw materials.

4.4 Responsibility for organizing the removal to the temporary storage site of waste lies with the head of the workshop in which the waste is generated.

4.5 Waste must be stored at a designated location until it is sent for disposal. The list of waste and storage locations for each type of waste is reflected in the Waste Generation and Disposal Limits Project and in the temporary storage scheme.

4.6 For each type of waste there is an established storage limit on the territory of the enterprise. Periodically (at least once a year) after the accumulation of the transport batch, all waste must be removed from the enterprise for recycling, reuse or disposal.

5 Collection and disposal of metal waste

5.1 Waste metalworking production in the form of chips, residues of bar material, stamping production in the machine shop and HMO should be divided into types:

aluminum waste;
brass waste;
ferrous metal waste;
alloyed (stainless) steel waste;
zinc alloy waste.

5.2 Bunkers and workshop intermediate containers for collecting these wastes must be marked (signed) and located in places designated for the collection and temporary storage of waste convenient for the approach and access of vehicles.

It is forbidden to mix different types of waste.

5.3 Heads of departments, as well as persons responsible for the collection and temporary storage of waste, are obliged to monitor the condition of container sites and other places of waste accumulation and ensure the cleanliness of the surrounding area.

5.4 The workplaces of machine operators where chips are collected must be equipped with containers for collecting chips with sedimentation tanks for draining oil and coolant.

Workshop containers for collecting waste, as they are filled, should be delivered to container sites - storage tanks, where waste is reloaded into containers and stored in strict accordance with the types of waste.

Non-ferrous metal waste (brass and zinc) must be stored in an isolated room.

5.5 The organization of sending metalworking waste for disposal is carried out by the Procurement and Logistics Directorate in strict accordance with the type of waste. Waste is sent at the request of the workshops in the presence of a representative of the OMTS and a representative of the workshop in which this type of waste was generated, and which is responsible for the collection, storage and delivery of waste.

5.6 Utilization of metalworking waste is carried out by delivery (export) to specialized organizations of secondary ferrous metal and secondary non-ferrous metal in accordance with the concluded agreements by the buyer's transport.

5.7 Contracts for disposal are concluded by OMTS.

6 Collection and disposal of waste from the electroplating shop and treatment facilities.

6.1 Wastes of the galvanizing shop generated in the process of work are non-ferrous wire waste (copper, aluminum), liquid waste.

6.2 Waste treatment facilities is galvanic sludge formed after neutralization of wash water coming from the electroplating shop and then sent for disposal.

6.3 Solid waste (galvanic sludge) is collected in metal bins and temporarily stored on the site near the treatment facilities and, as it accumulates, is removed by the transport of the contractor, according to the contract.

6.4 OTEiN is responsible for concluding contracts for the disposal of this type of waste.

7. Collection and disposal of waste molding masses (plastics).

7.1 This type of waste is generated in the process of manufacturing parts from thermoplastic materials that can be used as secondary raw materials in production, as well as plastics with metal inserts. Waste must be sorted by type of plastic, placed in bags and signed.

7.2 Temporary storage of waste is carried out in bags in the allotted area, according to the layout, strictly according to the types of plastics.

7.3 If it is impossible to use in production, the waste, as it accumulates, is sent for recycling (reuse), according to the contract.

7.4 OMTS is responsible for concluding contracts for the sale of waste plastics.

8. Collection and disposal of assembly production waste

8.1 Wastes of assembly production are washing liquids (Viton, alcohol-gasoline mixture, etc.), cardboard, and also in small quantities - the remains of wires, compounds, adhesives.

Used flushing liquids belong to the class of flammable liquids and GZH.

Waste of hardened paints and varnishes, adhesives, compounds, remnants of wires weighing (one-time) up to 5 kg. may be mixed with municipal solid waste.

9. Collection and disposal of waste containing oil products, waste of organic solvents and other flammable liquids and combustible liquids

9.1 Sources of formation of waste containing oil products are:

maintenance of vehicles, equipment (machines, mechanisms, electrical equipment, etc.);
metalworking industry using oils as cutting fluids;
testing products according to specifications in a testing laboratory;

9.2 Liquid wastes containing petroleum products include:

used hydraulic oils;
waste industrial oils;
used engine oils;
spent transmission oils;
used compressor oils.

9.3 The requirements for the collection and storage of waste containing petroleum products, waste organic solvents and other flammable liquids and combustible liquids are determined by their high fire hazard - the ability to maintain combustion, self-ignition and spontaneous combustion.

9.4 Storage of such waste should be carried out, according to the approved layouts, in isolated rooms (sites), provided with primary fire extinguishing equipment and fire equipment.

9.5 Drainage of liquid waste containing oil products, and waste of flammable liquids and combustible liquids from the equipment is carried out using special devices and / or devices that exclude their spillage, strictly according to types and brands. It is strictly forbidden to mix different types of waste and store them in unsigned containers, as well as pour them into sewers and open areas of the soil.

9.6 Collection of liquid wastes containing oil products and flammable and combustible liquids is carried out in metal sealed containers (barrels) or special plastic barrels installed on a metal pallet to collect accidentally spilled oil.

Each container must be marked with the name of the waste and the number of the unit in which this waste was generated.

9.7 Responsibility for the proper fulfillment of the requirements for the collection and storage of flammable liquids and combustible liquids rests with the heads of the departments in which they were formed, and the persons appointed responsible for the collection and storage of waste

9.8 As they accumulate, waste flammable liquids and combustible liquids must be sent for use (sale to third parties) or disposal.

9.9 Responsibility for the conclusion of contracts for the disposal of these types of waste lies with the OTEiN. Contracts for used oils transferred for reuse are concluded by OMTS.

10. Collection and disposal of waste cutting fluids (coolants)

10.1 Sources of waste generation are metalworking industries that use synthetic coolants as lubricating and cooling fluids.

10.2 Collection of liquid coolant waste is carried out in sealed metal containers (barrels) or special plastic barrels marked with the type of coolant and the number of the department in which this type of waste was generated.

10.3 Storage of coolant waste should be carried out in isolated rooms. It is allowed to store coolant waste in the same room with waste oils, flammable liquids and combustible liquids, provided that separate sites are provided, marked with plates indicating the type of waste.

10.4 As it accumulates, coolant waste should be sent for disposal.

10.5 Responsibility for the conclusion of contracts for the disposal of these types of waste lies with the OTEiN.

11. Collection and disposal of mercury-containing waste

11.2 Responsible for the collection and storage of mercury-containing waste are:

for mercury-containing lamps - the department of the chief power engineer;
for mercury-containing devices - the department of the chief metrologist.

The resulting waste should be handed over to the OGE to a temporary storage warehouse.

11.3 Storage is carried out in a closed room, ensuring no access by unauthorized persons in a container that excludes damage to mercury lamps and the entry of mercury vapor into the room.

11.5 At the request of the OGE, the OTEiN requests and receives an invoice from the representative of the company for disposal. After payment of the invoice, the OMTS organizes the shipment and removal of waste by the contractor's transport for subsequent demercurization.

11.6 In the event of an emergency during storage or loading of waste, leading to a violation of the tightness of lamps or devices, it is necessary to demercurize places contaminated with mercury using napkins moistened with a 10% solution of potassium permanganate (potassium permanganate), and then rinse with water.

11.7 Responsibility for the conclusion of contracts for the disposal of these types of waste lies with the OTEiN.

12 Collection and disposal of lead batteries (lead batteries - batteries)

12.1 Batteries that have expired or become unusable must be replaced. In this case, waste of the II hazard class “Spent lead batteries, undamaged, with electrolyte not drained” is generated, which require special care when handling.

12.2 Storage of batteries is carried out in a closed room, ensuring the absence of access by unauthorized persons. It is obligatory to find a sign with the inscription “waste of the 2nd hazard class“ Undamaged lead batteries, with electrolyte not drained ”and the data of the person responsible for the accumulation of waste.

12.3 During storage, spent lead-acid batteries are placed with the lids up, while the plugs on the used batteries should be in place and tightly closed.

12.4 A prerequisite for the replacement and temporary storage of spent lead batteries is to maintain their integrity and tightness. In order to prevent accidental mechanical destruction of used batteries, they should be handled with care.

Forbidden:

any actions (throw, hit, disassemble, turn upside down, etc.) that can lead to mechanical damage or destruction of the integrity of used lead batteries;

destruction, release into a container with municipal solid waste or transfer of used lead batteries to be disposed of to individuals or legal entities that do not have a license to collect, use, neutralize, transport, dispose of hazardous waste;

placement of spent lead batteries at landfills and landfills for solid household waste.

12.5 As waste is stored and accumulated up to the established norm (but not more than 6 months), spent lead batteries are transferred for disposal to a specialized enterprise licensed for this type of activity.

in accordance with the concluded agreement.

12.6 In order to prevent damage to the batteries during transportation, containers should be used to ensure their safety. For this, it is allowed to use dry, undamaged cardboard boxes from new batteries or other containers. At the same time, used batteries are neatly and tightly placed in a transport container and laid with depreciation and fastening means.

Boxes must be covered with adhesive tape at least 50 mm wide along all seams. On each shipping container (container, box, crate) with used lead batteries, handling signs “Caution! Fragile!” "Top", on cardboard boxes additionally the sign "Protect from moisture".

12.7 Responsibility for the collection, storage and delivery of waste lies with the logistics manager.

12.8 The Purchasing and Logistics Directorate is responsible for concluding contracts for disposal.

13. Collection and disposal of tires from vehicles

13.1 Automobile tires with a metal cord are classified as IV hazard class waste.

13.2 Tires that have worn out or become unusable must be stored on a hard surface. Place of temporary storage - on a platform with a hard surface near the garage. As the transport batch accumulates, they must be disposed of (buried) under an agreement at an industrial waste landfill.

13.3 The Procurement and Logistics Directorate is responsible for concluding contracts for the disposal of tire waste.

14. Collection and disposal of cardboard and paper

14.1 Waste paper and cardboard belong to the 5th hazard class.

14.2 Waste paper and cardboard are generated as a result of the production and administrative activities of the enterprise, can be used as secondary raw materials, and therefore are subject to sale.

14.3 Waste is hazardous due to fire hazard. Collection and temporary storage of waste is carried out in an unheated room. As the waste accumulates, it is transferred to organizations according to the contract for use as secondary raw materials.

14.5 For the convenience of storage and transportation, employees of the unit where the cardboard is formed, and those responsible for the collection and temporary accumulation of cardboard waste, are obliged to compact it as much as possible - put it in packs, and then transport it to a temporary storage warehouse.

14.6 OMTS is responsible for concluding contracts for the disposal of cardboard.

15 Collection and disposal of wooden pallets and reels

15.1 Wooden waste is generated as a result of the breakdown of pallets used to transport certain types of purchased materials and components, as well as wooden coils from under the wire and belongs to the group of solid household waste (large-sized).

15.2 Waste should be stored on a paved area. Place of temporary storage - must be marked with signs.

15.3 As the transport batch accumulates, the waste must be removed under the contract to the industrial waste landfill for disposal.

15.4 Responsibility for the conclusion of contracts for the disposal of wood waste lies with the economic department.

16. Collection and disposal of municipal solid waste (MSW)

16.1 Municipal solid waste is generated as a result of production activities and the life of employees of the enterprise, when cleaning workplaces, as well as in the dining room when cooking.

In addition, some types of production waste are allowed to be combined with MSW.

16.2 Waste is collected in metal containers at MSW sites and then, as it accumulates, but at least twice a week, it is taken to the city dump by a contractor.

16.3 Sites for the collection of solid waste should have a solid (asphalt or concrete surface) fenced on three sides and have free access roads for vehicles.

16.4 Containers for solid waste must be equipped with lids.

16.5 Responsibility for the conclusion of contracts for the export of solid waste lies with the economic department.

17. Collection and disposal of personal protective equipment and workwear

17.1 Personal protective equipment H overalls that have lost their properties or worn out according to the terms of wear, are subject to write-off under the Act for the write-off of material assets.

17.2 Decommissioned personal protective equipment and overalls are subject to delivery to the warehouse (supervisor of the enterprise). By decision of the commission, the handed over PPE and overalls are disposed of, or remain in the warehouse for further use.

18. Collection and delivery of precious metal scrap

18.1 Waste (scrap) of precious metals may be generated by decommissioned equipment or devices containing precious metals.

18.2 Persons appointed by the order of the head of the department responsible for organizing the accounting, collection and delivery of precious metal waste should be guided by the "Instructions for the accounting and storage of products containing precious metals, as well as the collection, accounting and storage and delivery of scrap and waste of precious metals".

19. The procedure for the disposal of decommissioned tools, spare parts for equipment and accessories

19.1 Spare parts for equipment, tools and equipment that have become unusable after being used in production and cannot be restored must be written off by decision of the commission under the "Act for the write-off of material assets", after which they must be handed over as scrap of non-ferrous and ferrous metals.

19.2 Waste is sent for disposal to specialized organizations of secondary ferrous metal and secondary non-ferrous metal.

19.3 OMTS is responsible for concluding contracts for disposal.

20. The procedure for the disposal of parts rejected in the production process.

20.1 Parts and assembly units rejected during the production process and subject to destruction, according to the decision of the commission, are placed in the “Rejection Isolator” of the workshop for the purpose of their further disposal. (Forms of "Acts" are given in).

20.2 Products rejected by consumers and passed analysis, on the basis of an analysis report, are either sent to the consumer, if the defect is not confirmed and this is provided for by the contract, or written off and destroyed by the assembly shop within a month from the moment they arrive at the enterprise.

20.3 Based on the write-off and destruction certificates, the product is brought into a state that excludes return to production by a workshop employee in the presence of a representative of the technical control department. The head of the technical bureau of the workshop is responsible for their destruction and disposal.

20.4 The decommissioned parts made of non-ferrous metals are handed over to the rejection isolator of the central warehouse according to the Transfer Certificate - destruction for recycling. Rejected and decommissioned parts and assembly units made of steel and plastics are disposed of as ferrous scrap and waste plastics.

20.5 OMTS is responsible for signing contracts for disposal.

21. Procedure for disposal of decommissioned equipment

21.1 Technological and engineering equipment that has failed and cannot be restored, as well as obsolete equipment, is subject to write-off, after which it is delivered to the central warehouse.

21.2 By order of the General Director, a commission is created that decides on the write-off of fixed assets.

21.3 For the purpose of further disposal, dismantling, partial disassembly of the equipment is carried out by the repair department.

21.4 At the CA, if it is possible in terms of dimensions, or at a specially designated place, the following shall be handed over separately: cable products, electronic components, aluminum and steel structures.

21.5 If, according to the passport data, the equipment contained precious metals, then their delivery is carried out in accordance with the "Instructions for Accounting and Storage of Products Containing Precious Metals, as well as Collection, Accounting and Storage and Delivery of Scrap and Waste of Precious Metals".

21.6 Metal parts, structures, as well as materials that are not suitable for further use are disposed of through organizations such as "vtorchermet" and "vtortsvetmet".

21.7 OMTS is responsible for concluding contracts for disposal.

yes, almost everything can be recycled: any technique, furniture, machines, equipment, consumables, archives, spare parts, goods, etc.

I want to write off - do you make a write-off?

Write-off is an accounting operation that includes obtaining an act of examination of the technical condition of the equipment (conclusion on maintainability), the actual write-off and disposal. The end of the write-off - after the disposal of equipment (and for state enterprises - after receiving funds for the extracted materials). All this we can do.

Do I need to recycle precious metals?

if you are a state enterprise - definitely

if an enterprise with state participation: 50 to 50 - as your accounting department decides

if it’s private, your accounting department will choose “without precious metals” and will be right

if foreign - as your management decides

Why is it necessary to dispose of equipment in specialized organizations?

In a nutshell: by throwing office equipment into a regular landfill, you are polluting the environment. The composition of recycled office equipment includes many metals: mercury, lead, cadmium, antimony, arsenic, selenium, and other heavy metals; plastics and other substances based on toxic poisonous components. These substances are not dangerous in the original product, but once the product is destroyed and their components are exposed to the environment, they begin to actively decompose, releasing the strongest poisons.

On the basis of what regulations, laws, regulations, office equipment must be disposed of in specialized organizations?

There are many legislative acts regulating relations in the field of waste. All of them are available online for free. Here are some of them:

Federal Law of the Russian Federation No. 7-FZ dated January 10, 2002 “On Environmental Protection”.
Federal Law of the Russian Federation No. 89-FZ dated June 24, 1998 “On Production and Consumption Waste”.
Instructions on the procedure for accounting for precious metals, precious stones, products from them and keeping records in their production, use and circulation.
Order No. 786 of 02.12.2002 “On Approval of the Federal Classification Catalog of Wastes” and, as an appendix, the Federal Classification Catalog of Wastes.
Instructions for handling hazardous waste.
Criteria for classifying hazardous wastes as hazard classes for the environment (to Order No. 511 of June 15, 2001)

We have concluded an agreement with a city cleaning company (specialized vehicle fleet). Why do you think that we cannot dispose of decommissioned computers under this agreement?

It is necessary to distinguish between the usual removal of garbage to a landfill and the disposal of decommissioned technical equipment, obsolete computer equipment and other radio equipment that contains a complex of various materials - incl. poisonous and harmful substances (eg cathode-ray tubes of monitors).

In the first case, we are talking about household waste, for which, in fact, the landfill is intended. In the case of the disposal of office equipment, everything is much more complicated. Primitive disposal of this kind of waste, in addition to causing irreparable damage to the environment, also entails administrative and legal liability. In addition, if your decommissioned computer (monitor, printer and other office equipment) contains ferrous and precious metals (and they are contained there), then you must return their value to the Federal Property Management Agency. That is, the technological process of recycling office equipment goes through several stages: dismantling, sorting, separation of components containing harmful substances, etc.

As a result of such processing, most of the emitted materials are returned to production, and hazardous substances are neutralized or destroyed in another safe way, without causing significant harm to the environment. In addition, this procedure is accompanied by a set of relevant documents on disposal, which can only be issued to you by a specialized company working in this particular direction.

As for the precious metals contained in your office equipment, only an enterprise that specializes in special services has the right to make a conclusion about their content (as well as their allocation) and pay for them. registration in the assay office.

Tell me, please, how and where is the determination of the mass of the utilized cargo and, accordingly, the price?

To determine the mass, a table of average weights of various pieces of equipment is used. The customer sends us a list of equipment, and we calculate the weight of the lot and the preliminary cost of disposal, based on the base cost.

What determines the cost of recycling technical equipment?

To answer your question, you first need to explain what the cost of our services generally consists of. The fact is that the “correct” disposal of computers and office equipment involves the implementation of a whole range of special operations, sometimes involving a significant amount of labor and paying for the services of third-party organizations that are also involved in this process.

So, for example, the cycle of works on the disposal of one recyclable unit necessarily includes:

loading
Transportation (by own or third-party transport, at various distances);
unloading
Dismantling with separation into raw components;
Sorting, pressing and briquetting of ferrous metal;
Loading and shipment of ferrous metal by type (services of third parties).
Department of plastic elements;
Sorting by grades and shredding plastic;
Loading and shipping plastic (third party services).
Separation of elements with a high content of non-ferrous metals;
non-ferrous metal packaging
Loading and shipment of non-ferrous metals by type (services of third parties).
Removal of mercury lamps; their packaging and subsequent shipment for processing (services of third parties).
Removal of selenium drums; their packaging and subsequent shipment (services of third parties).
Removing Batteries and Batteries
Sorting of accumulators and batteries by types and content of metals: lead, cadmium, lithium, loading and shipping (third party services).
Removal of cartridges: sorting: sending them to specialized organizations
High lead CRT monitor glass separation, phosphor coating separation, waste glass shredding, glass waste loading and shipping
Ordinary glass separation, loading and dispatch of glass waste
Separation of plastic and sorting it by type: ABS, polycarbonate, polystyrene, expanded polystyrene
Department of paper and cardboard
Isolation of class 5 waste intended for disposal at a landfill for household waste (a mixture of plastic and iron (small parts), household plastic, glass (small parts), polycarbonate (small parts), polystyrene foam (small parts))
Cleaning boards from unwanted impurities
Sorting of materials according to the degree of content of precious metals;
Sending raw materials (printed circuit boards, radio elements, connectors, cables) for processing and refining (services of third parties).

Thus, the cost of performing all the work will amount to a certain amount, which depends both on the range of equipment being disposed of, and on the conditions for performing work (disposal) under the contract. At the same time, it is necessary to take into account that we must bear these costs immediately, as soon as we begin work, and we will reimburse ourselves only upon completion or, more precisely, after the processing of raw materials (this can be up to 6 months). Of course, these costs increase in the case of equipment removal from remote locations, in case of complex loading (for example, loading cartridges from the 5th floor without an elevator), in the case when loading is possible only mechanically (equipment 1500 kg), or loading is possible only by a professional team of loaders (descent of the copier 400 kg on the marble stairs from the 4th floor). Obviously, the content of materials obtained as a result of these works will also be different for different types of equipment. Of course, the cost of recycling a ton of CRT monitors is much higher, and the cost of the extracted materials is ten times lower than, say, a ton of system units. And this means that it is almost impossible to determine in advance how much our costs will be compensated.

In this regard, we can say about the cost of work only after receiving detailed information about what is rented, from where and about the conditions of loading, on the basis of which negotiations will be conducted and contracts for disposal will be concluded in the future.

If we understood correctly, first we pay you for recycling, and then you transfer money to us for the allocated precious metals? What then is the point of paying for your services if you are going to pay us anyway? It turns out that in order for your services to be most beneficial to us, we must dispose of office equipment with a high content of precious metals. How can we predetermine their content?

This is not true. For government agencies, we first recycle equipment, pay you for the extracted materials - precious, ferrous and non-ferrous metals, and only then issue an invoice for disposal services. Precious, ferrous and non-ferrous metals are paid to state institutions either to an account marked “payment to the budget” or directly to the account of the Federal Property Management Agency. Payment is coming without VAT !!

Disposal services you pay with VAT. Reciprocity is not possible.

Now about the ratio of the amounts for the extracted metals and the cost of disposal: usually the cost of metals does not exceed 10-20% of the cost of disposal services. This is due to the fact that the content of precious metals in imported equipment is usually simply negligible.

It is impossible and illegal to determine the content of precious metals in the utilized equipment in advance by some kind of expert assessment. This is indicated by a direct indication of the Assay Office of Russia. And moreover, d data on the content of precious metals and other elements specified in passports, forms, inventories, registers, labels, waybills and other accompanying documents cannot be the basis for final mutual settlements.

You say that you issue the most complete set of documents on disposal. Please explain which documents are included in the standard package and which are included in the extended package.

The standard package of documents for recycling includes:

Agreement on the provision of services for disposal
The act of acceptance and transfer of technical means
Certificate of completion
A copy of the license to carry out activities for the collection, neutralization, transportation, placement of hazardous waste.
A copy of the Certificate of special registration.

The extended package for government agencies contains all the documents of the standard package, and in addition:

Price list for calculating the cost of final processing of non-ferrous and precious metals scrap at specialized enterprises.
Calculation-passport for extracted materials
Calculation-passport for precious metals received in scrap and waste
Requisites for transferring funds for precious, non-ferrous and ferrous metals.

We are fully satisfied with your package of documents. But there is one problem. The point is that most of those Funds that are listed in the annex to the contract cannot be raised. The authorities require that all equipment be documentedly disposed of according to the lists from the accounting department, but since 1990 a lot has been lost, dismantled, taken to a landfill along with garbage ... Is it possible to issue disposal documents if the technical equipment to be handed over does not exactly match the lists indicated in the application?

In your case, we are dealing with the most common situation. It is extremely rare for vehicle listings to be completely real. There is always something missing, something extra. We understand that the safety of faulty, obsolete and, moreover, decommissioned ones. no one really cared about the money. Some have been dismantled, some have been thrown away, and some cannot be identified. Therefore, discrepancies, regrading, the presence of missing or non-received equipment are possible. And we allow discrepancies within certain limits -% of the total weight of the party. In any case, please contact us, describe the situation - we will try to help.

Our equipment has not yet been decommissioned, because first you need to get a conclusion about its technical condition. Who can give us such a conclusion?

Such a conclusion can be issued by an organization engaged in the repair and maintenance of such equipment. They can conduct an examination of the technical condition and recommend this equipment for decommissioning. But the decision to write off is made in any case by you, and not by an outside organization. The act of technical expertise should reflect the reasons why the equipment cannot be used in the future, as well as the possibility of using it for spare parts.
Specialists of the technical department of Prompererabotka LLC perform such an examination and issue technical condition certificates under a separate agreement in accordance with the ROSTEST Certificate.