Love 

How to weave bracelets from rubber tubes. How to weave bracelets from colored weaving tubes. Two-color bracelet for girls

How to weave from tubes?

Many girls have tried to weave themselves a bracelet at least once in their lives. But few people know how to weave a bauble from tubes. But in this form it will look much more original and interesting, and it is created quite quickly.

Simple weaving

To make your first experience successful, try weaving a bauble using a very simple pattern. To work, you will need 4 special plastic tubes about 2.5 m long.

  1. We tie all four ends of the tubes together with a knot. We form loops from the two outermost ones: for this we make a semicircle from each. We insert each edge of both tubes into the opposite loop. The two tubes in the middle remain unchanged. Tighten the loops.
  2. We continue to weave the bauble from the tubes to the desired length. The most important thing is to form the knots correctly. They should be tight, but not overtightened. Such a bauble will look airy and neat. To make the bracelet curl nicely around your wrist, twist it several times before putting it on.

Bauble with beads

If you have small beads with a large hole, then you can weave a very elegant bracelet. For this you will need:

  • tubes;
  • beads;
  • golden metal ring.

Progress:


You can wear these bracelets yourself or give them to a friend as a sign of friendship. According to Indian beliefs, in this case it will be very strong.

Today we will learn how to weave unusual bracelets from plastic tubes, which will surely attract attention with their originality.

Bright bracelet made of cocktail tubes

After any party, there are a lot of unused cocktail straws left over. They are thrown into some distant box, where they are safely forgotten. The same story repeats itself on the next holiday. But these tubes can be used to make an excellent bracelet!

Materials and tools for a tube bracelet

To make an original bracelet, we need to take the following tools and materials:

  • scissors
  • wire cutters
  • cocktail straws in four colors
  • wire
  • Super glue
  • threads

Making a bracelet from cocktail straws

1. First, carefully sew the ends of four straws of different colors together.


2. Let's start weaving. We place one straw on top of the other clockwise, then bend the second and place it on the third. We bend the third and put it on the fourth. After this, we begin to bend the tubes counterclockwise, in the opposite direction.

3. Bend the wire bracelet frame. We pinch off the excess with pliers. To prevent the wire from being visible through the bracelet, we thread the frame through the straw. We insert the frame into the middle of the weaving, and then begin to braid it.


4. After the straw ends, drip glue inside it, and then insert another one of the same color into the hole.


5. We braid the straws to the end of the frame, then cut off the remaining unnecessary ends of the straws. We insert the last end inside the entire structure and drip a little glue into this place to secure the connection more securely.


Our bracelet is ready. It will look bright and unusual, attracting the attention of others.

Two-color bracelet for girls

If the previous option turned out to be too difficult for someone, don’t be discouraged. Now we will learn how to make a simpler two-color bracelet. This is the perfect decoration for a little girl.

Materials and tools for making a two-color bracelet

To make a bracelet we will take:

  • IV system
  • scissors
  • gypsy igloo
  • threads of two colors

The process of making a two-color bracelet

1. Cut the dropper system into fragments approximately 1.5 cm long (you can change the length of the segments as desired). There should be approximately 40 pieces in total (this depends on the thickness of the hand).


2. We string all the details onto the first thread (beige). A thin thread can be folded in half. The tube needs to be filled.


3. We thread a thread of a different color (blue) into the pieces of tubes towards the beige thread.


4. We put all the segments together, and then we pull the thread in a zigzag through all the fragments one by one.


5. Carefully pull the second thread through the fragments. We tighten it as we go so that all the pieces lie flat.


6. We move in this way until all the tubes strung on the first thread are finished. We try it on during the process - the bracelet should lie tightly and not dangle. Please also note that it will stretch.


7. After we have strung all the parts, we need to cut off the excess threads and tie the knots tightly. The ends of the threads can be pulled through the pieces of tubes, thereby hiding them. In this case, the bracelet will look more aesthetically pleasing.


8. That’s it, our two-color bracelet for girls is ready.


9. This is how the bracelet looks on your hand.


You can make such a bracelet from threads of one color, and then decorate it with beads - multi-colored or matching. There is a lot of scope for creativity and imagination here for you and your child.

The wicker bauble is traditionally considered an attribute of the hippie subculture, popular among young people 60-70. The very idea of ​​​​creating such jewelry came from the Indians - the indigenous population of North America. They believed that two people who exchanged these woven attributes would be bound by a special bond until the end of their days. This is where the symbol of peace and goodness came from.

Nowadays, a bauble is considered a fashionable decoration in an ethnic style. Baubles baubles can be flat and round, twisted, narrow and wide on a plastic frame. They are made from threads, colored wires, rubber tubes, scubidoo tubes and even cocktail tubes. Cocktail straws can be a valuable material in themselves, or serve as a basis for tying with thread. It is not difficult to understand how to weave a bracelet from tubes. Here you will learn how to weave from tubes. Weaving baubles is a very exciting process.

Before you start, prepare all the necessary materials, here's what you'll need:

  • Plastic straws, they can be thick or thin, plain or colored
  • Beads from any material, matching color and corresponding to the thickness of the tubes
  • Decorative ring small size, preferably gold or silver color

Now you need to be patient and you can start making the product. To prepare the base for the future decoration, you need to fold the tube in half and cut it into two halves. One of them should be put aside, we will return to it later. We also divide the part remaining in our hands in half. As a result, you should end up with two short twigs, the length of which is slightly larger than the circumference of your wrist.

If you want to make a multi-colored top, then cut several pieces of multi-colored twigs of the appropriate size.

To start weaving, bend two small twigs together in the middle and tie their ends into a strong knot.

Gallery: bracelet made of plastic tubes (25 photos)

















Braiding the workpiece

You have four working threads; they need to be laid out on a table or any other work surface so that they do not get tangled. One bead is strung on the leftmost tip. However, if its hole is quite wide, then you can thread it through two twigs.

Then you need to take a long tube, it is tied in a knot around the workpiece, this must be done in such a way that the ends of this twig are approximately the same in length. Then you should wrap it around the remaining twigs and secure it with another knot. After this, the tubes are pulled forward. The bead is now firmly in place. Check that your first node matches the image in the diagram.

Tie another knot without using beads, then start stringing them again and securing them with knots until the base of your future decoration is finished. At the end, tie a strong knot. If you wish, you can braid the remaining couple of centimeters of twigs into a fishtail braid, so the bracelet will look much nicer and tidier.

In addition to the braid, you can decorate the clasp of the bauble with a small golden ring prepared in advance. It will help make the fastening more durable, your bracelet will not break or fall off.

Square weaving technique step by step

Weave such a bracelet not difficult, you just need to strictly follow the instructions; even a beginner can handle this task without any problems. The blank for a square bracelet is made similarly to the previous one. It is important to note that the length of the threads should be three to four times the expected length of the product.

To get started you will need:

  • Colored plastic tubes
  • Working surface
  • Scissors
  • A small decorative ring in gold or silver color

Secure the ends of the twigs with a strong knot - this will be the beginning of the bauble. Pinch the knot with your index finger and thumb. If you are just starting to weave bracelets, it will be unusual for you to hold the product this way. You can hold the knot between your knees and work with both hands; later you will learn to handle it with one.

So, straighten the tubes and pull the ends in different directions so that they do not get tangled. Now place the workpiece on the work surface; for convenience, the beginning of the weaving can be pressed with something so that it does not slide off and slow down the manufacturing process.

The colors of the tubes can be absolutely any, but in the diagram you can see two bright and contrasting ones, so the square weaving technique will be clear to you.

Let's start weaving from the top tube, you need to bend it in half from left to right, and put it on top of the other, carefully check the diagram. We fold the lower tube in a similar way, also from right to left. You should end up with two loops lying on straight twigs. Now we bend the two remaining straight tubes from left to right. As a result, the four ends will lie on top of each other in a zigzag pattern. Start pulling the ends gently and evenly, you should end up with a square knot. Check if your square knot matches the image in the diagram provided.

If you want to learn a new skill, then weaving bracelets from colored tubes will definitely interest you. Is it possible to make something from such material and how to work with it? We will consider below. We will need imagination, inspiration, luck and some free time.

The basis of labor

This weaving is called Scoobidoo (not to be confused with the cartoon and the dog). In France in the 20th century there was a performer who wrote a song of the same name. To please their favorite idol, fans made a bracelet made of tubes as a souvenir. So they gave him their love.

This is probably why weaving is especially popular among children and teenagers, since they are young and bright, and often show their love and care through the creation of souvenirs. The manufacturing technology is very easy, this activity is especially suitable during family evenings - you can consult, brag and give a gift.

Plastic strands are used for work. They come in different sizes and have more colors than a rainbow. The length is varied - from 80 cm to 100 cm. The tubes can also be round or flat.

There are two types of weaving - square And round. They differ in appearance and complexity. In easy master classes for beginners, everything is described and shown in detail, so there will be no problems with implementation.

The square is woven from four strands:

The round one is woven in exactly the same way:

Both weaves start the same way. The length of the tubes should be 3-4 times the length of the product. You need to take 4 strands of different colors and tie them into a knot. This is the beginning of any work. You can use 2 strands to make an accessory, but then they need to be tied as shown in the picture.

Don't use straws for cocktails because they break easily. The material for future beauty must be more flexible! If there are thin tubes, then the products will be more elegant. But it is best to use scubida. Let's consider the stages of work.

Where to begin

In order to make a regular bracelet, there is a diagram that you need to work according to.

It shows each movement with arrows. This product is made with two bundles. The picture shows the first and basic steps that need to be repeated later.

Picture No. 5 - tighten the tubes tightly, but not too much so that they do not tear or break.

Picture No. 6 is the first stitch that will work. Repeat all steps until the product reaches the desired size. Advice - put the bracelet on your hand so as not to make a mistake with the length of the product.

The accessory of four tubes is a little more complicated. Let's take a closer look at it:

  1. Make a knot as described above. We take it with our index finger and thumb.
  2. We push the tubes apart, stretching them out. Do not make the product by weight; place it on a table or board.
  3. Starting work with a green tourniquet. We put it on the yellow loop, the yellow one on the blue one, creating a loop, the blue one on the red one, and we finish with the red one - thread it into the green loop.

  1. Carefully pull out all the tubes, creating a square.

Colorful world

Weaving baubles can be done with different knots, for example, “twisted”, “brick”, “macrame”, etc.

This bracelet is created using a twisted knot.

  1. Let's take three tubes of different colors and beads to decorate the product. Bend one of the strands, leaving a loop the size of a bead. Let's fold it with the other and wrap it with a thread, which we will conventionally call a knot thread.

  1. The base flagella must be braided to the required size. Do not forget to string beads onto the knotted tube, maintaining intervals. Pull all the threads through the bead at the end of the project. Carefully trim the ends.

How to weave a “brick”

This knot is more complex than usual, but the products look more sophisticated and interesting.

  1. We place two flagella perpendicularly to the third. Place the end of the horizontal tube over the vertical ones, as shown in the photo.

  1. We pull the end of the left flagellum into the loop, while bending the top one down. We carry it under the lower horizontal tube.

  1. Repeat the previous steps with the end of the right thread, tightening the knot. It turns out to be a “brick”.

  1. Follow the pictures to complete the project. Be careful when moving the tubes so as not to get confused, mentally mark them with numbers.

If you need to add a new flagellum to the product, then repeat the following steps:

  1. Place a new tube on the half-finished work, placing it diagonally.

  1. Now we make two rows with old flagella to secure the weaving. Trim the ends of the old tube.

Skubidoo - universal straws. Because they can make many products. These are not only bracelets, but also figurines, pens, handbags, photo frames and toys. Basically, one pack of flagella is enough for several works, so we can safely call the needlework quite budget-friendly.

Video on the topic of the article

To get inspired by the process, you can watch the training videos:

The ideas of weaving jewelry from scrap materials were borrowed from the ancient Indians. Among them, the bauble was considered a symbol of friendship - those who exchanged bracelets once were considered sworn brothers forever. Nowadays, baubles are a favorite accessory of young people; they go with any outfit, you just need to choose the color. Many girls like to weave such decorations from scrap materials, one of which is special rubber tubes. There are special kits for sale for weaving from parts of different colors, lengths and thicknesses. Everyone can choose according to their taste. You can use colored wire or even take wire from old headphones. There are different weaving techniques, but let's see how to weave baubles from tubes. In this article you will find a master class for beginner needlewomen.

Simple weaving

First you need to try to weave a decoration according to a simple pattern. For this you will need four straws. Colors can be chosen to suit your taste. It's best to make work items in different colors to avoid confusion.

Important! If you don’t succeed right away, don’t despair, a little practice and the process will go!

Let's start creating an original bracelet:

  1. We take the tubes and tie all four ends together with one knot.
  2. The workers will be the two extreme ones. We won't touch the ones in the middle. We weave knots from the working parts.
  3. We weave the knot as follows: bend one of the parts in a semicircle, thread the second through the resulting loop from below and tighten it.
  4. Thus, we weave the bracelet to the desired length. The main thing is to make the most even and identical knots, tight, but not overtightened.

Such a thing will be beautiful and elegant, despite its apparent simplicity.

Bauble with beads

Now let's look at how to weave a bracelet from tubes with beads. For such a bracelet you will need small beads with large entrance holes, and a golden ring will be useful for the clasp.

Let's start a master class for beginners:

  1. First, measure the circumference of your wrist and multiply it by 10. This is the required length of the tubes. Take the piece and cut it to the required length. Then we cut it in half.
  2. We leave one half unchanged - this is our working part. The second one is cut in half again. We get two short tubes. We fold them and tie them with a knot at the fold. We get four free ends of the same length.
  3. We straighten the ends, then string a bead onto the far left one.
  4. We tie the long working part to the main unit. We bring its ends under the bauble and tie them with a knot. We bring the ends to the front side of the decoration. This knot fixes the position of the strung bead.
  5. We do the same thing, only we don’t string the bead.
  6. In this way we weave the entire bracelet, alternating knots with and without beads.
  7. At the end we fix the ends with a knot. We make it in such a way that it fits as tightly as possible to the weaving.
  8. We put the ring on and tie the knot again.

Important! Fenechka is ready! You can wear it yourself or give it to a friend as a sign of friendship. According to the beliefs of the ancient Indians, it will be eternal.

Souvenir pen made from tubes

There are many ways to weave a bracelet from tubes, but you can use them to weave not only bracelets, but also funny souvenirs. Let's see what you can get from four tubes and a ballpoint pen:

  1. We attach four tubes to the end of the handle shaft. This can be done using wire.
  2. We arrange them evenly.
  3. We begin to weave as follows: we throw the first one over the second, forming a loop, we throw the second over the third, the third through the fourth, and we thread the fourth into the loop that the first tube formed. Tighten the knot, trying to do it evenly. You should get a colored square.
  4. We continue weaving in this way until the rod ends; the pattern should completely braid it. The ends can be glued with glue.

The caterpillar pen is ready, it looks very original and all your friends will surely like it!