Psychology of feelings 

GPRS Internet settings for Sony Ericsson W-series. Internet and messaging settings – Sony Ericsson Xperia arc User Manual

I think these GPRS Internet settings are suitable for Sony Ericsson w200i, w300i, w302i and other models in this series, but most likely there will be some differences in the names of the sections and their location. I made up setup guide for w302i on Tele2, but by analogy it should also apply to other operators. Settings for k and S series.

If you still can’t set up the Internet manually, then use the automatic settings by calling your operator’s help desk, and after saving them, adjust the access point. As a last resort, you can go to the nearest store of your mobile operator, where specialists will do it themselves.


Instead of wap.your_operator.ru enter internet.your_operator.ru. You can see the exact data below.

Sony Ericsson - Tele2

Menu->Options->Communication->Part. Internet->Credentials. Functions->Create new.
Name: Tele2
House. page: skip

Proxy: Use: Yes

Password: leave blank
Proxy address: 130.244.196.090


Now go to Organizer -> Applications. We point at your application, click "Functions -> Options -> Connection".
If there is a Tele2 Account, we begin to edit it; if it is not there, we create it (Functions->Create new)
Then select it and press Options. -> Edit
Name:can be changed on Body

Proxy: Use:No


Password: leave blank
Access point: internet.tele2.ru

All press "Save." and confirm this. Next, again on your application, press Options. -> Advanced -> Connection -> select “Tele”.
In the section "Advanced -> protection (first line) -> Access to Internet ->

Sony Ericsson - MTS

Menu -> Options -> Communications -> Par. Internet -> Credentials. Options -> Create new.
Name: MTS
House. page: skip
Preferred connect: here select Comm. packages
Proxy: Use: Yes
Username: leave blank
Password: leave blank
Proxy address: 192.168.192.168
Port number (unprotected): 8080
Then click "back". We skip the "GSM" section, and in the "Data com. pack." nothing should be written to either "Username"
neither in "Password" nor in the Access Point. We all press "Save." We agree with “Save connection profile?”.
Now go to Organizer->Applications. Point to your application, click "Options->Options->Connection".
There, if there is an MTS Account, we begin to edit it, if it is not there, we create it (Functions->Create new)
Then select it and press Options->Change

Name: can be changed to mts
Preferred connection: Comm. packages
in Proxy: Use:No
exit the "Proxy" section. We skip the "GSM" section, and "Data Com. Pack."
Username: mts
Password: mts
Access point: internet.mts.ru
All press "Save." and confirm this. Next, again on your application, click Options->Advanced->Connection->select “mts”.
In the section "Advanced -> protection (first line) -> Internet access -> One request" (this is the default, but it’s better to make sure, this reduces the likelihood of an erroneous request, for example, when opening an Internet page)
(If it doesn’t work, try entering the word mts in the Username and Password in the place where I wrote skip, and in the last paragraphs where I wrote that you need to enter mts, leave the fields empty, i.e. swap them)

Sony Ericsson - MegaFon

Menu -> Options -> Communications -> Par. Internet -> Credentials. Options -> Create new.
Name: MEGAFON
House. page: skip
Preferred connect: here select Comm. packages
Proxy: Use: Yes
Username: leave blank
Password: leave blank
Proxy address: 010.010.010.010
Port number (unprotected): 8080
Then click "back". We skip the "GSM" section, and in the "Data com. pack." nothing should be written in either the Username,
neither in Password nor in Access Point. That's it, click "Save." We agree with “Save connection profile?”.
Now go to Organizer -> Applications. We point at your application, click "Functions -> Options -> Connection".
There, if there is a MEGAFON Account, we begin to edit it, if it does not exist, we create it (Functions->Create new)
Then select it and press Options->Change
Name: can be changed to megafon
Preferred connection: Comm. packages
in Proxy: Use: No

Exit the "Proxy" section. We skip the "GSM" section, and "Data Com. Pack."

Username: leave blank
Password: leave blank
Access point: internet
or
access point: internet.msk<- Москва
access point: internet.ltmsk<- для лайт абонентов, Москва
access point: internet.sib<- Сибирь
access point: internet.ugsm<- Урал
access point: internet.mc<- Центральный регион
access point: internet.nw<- Северо-западный регион
access point: internet.kvk<- Северный Кавказ
access point: internet.volga<- Поволжье
access point: internet.dv<- Дальний Восток

All press "Save." and confirm this. Next, again on your application, click Options->Advanced->Connection->select “beeline”.
In the section "Advanced->protection (first line)->Access to I-net->One request" (this is the default, but it’s better to make sure). If it doesn't work, try entering the word beeline in Username And Password in the place where I wrote skip, and in the last paragraphs where I wrote that you need to enter beeline, leave the fields empty, i.e. swap them.

Sony Ericsson- Beeline

Menu->Options->Communication->Part. Internet->Credentials. Functions->Create new.
Name: BEELINE
House. page: skip
Preferred connect: here select Comm. packages
Proxy: Use: Yes
Username: leave blank
Password: leave blank
Proxy address: 192.168.094.023
Port number (unprotected): 8080
Then click "back". We skip the "GSM" section, and in the "Data com. pack." nothing should be written to either "Username"
neither in "Password" nor in the Access Point. We all press "Save." We agree with “Save connection profile?”.
Now go to Organizer->Applications. Point to your application, click "Options->Options->Connection".
There, if there is a BEELINE Account, we begin to edit it, if it is not there, we create it (Functions->Create new)
Then select it and press Options->Change
Name:can be changed to beeline
Preferred connection: Comm. packages
in Proxy: Use: No
exit the "Proxy" section. We skip the "GSM" section, and "Data Com. Pack."
Username: beeline
Password: beeline
Access point: internet.beeline.ru

All press "Save." and confirm this. Next, again on your application, click Options->Advanced->Connection->select “beeline”.
In the section "Advanced->protection (first line)->Access to I-net->Single request" (this is the default, but it’s better to make sure, this reduces the likelihood of an erroneous request, for example, when opening an Internet page)
(If it doesn’t work, try entering the word beeline in the Username and Password in the place where I wrote skip, and in the last paragraphs where I wrote that you need to enter beeline, leave the fields empty, i.e. swap them and please unsubscribe about the results).

Xperia is a line of powerful smartphones from Sony that are very popular and feature rich functionality. To use all the features of this mobile device, you need to know how to set up the Internet on a Sony Xperia.

If you know, you can easily perform a similar operation on a Sony Xperia smartphone. However, while maintaining the general procedure for setting network connection parameters, there are some nuances of setting up the connection that need to be discussed in detail.

Mobile Internet

Typically, mobile Internet settings come immediately after installing a SIM card and turning on the phone - this is a rule common to all mobile operators.

An alternative option is to call the support service and ask them to send a message with connection parameters to your number.

If neither the first nor the second option works, you can try to establish the connection through the smartphone settings yourself:

After a short pause and the connection is established, the Internet connection profile should automatically fill in with the necessary data. If this does not happen, you will have to enter the parameters manually:

To use the created hotspot, mark it in the settings, and then turn on mobile data.

Wireless network

Connecting to Wi-Fi is even easier and faster. To work with a wireless connection, you need to go to the settings in the “Wireless Connections” field and move the “Wi-Fi” slider to “Enabled”.

After turning on the adapter, all Wi-Fi networks available for connection will appear on the screen. All you have to do is select the one you need and connect to it, entering the security key if necessary (if it is set by the network administrator).

It is recommended to immediately make additional settings for your smartphone so that after waking up from sleep mode you do not have to reconnect to the Wi-Fi network (to save battery power, the connection is automatically reset).

This can be done in the “Advanced Settings” section - there is a special item here for setting the parameters for entering sleep mode.

Using a headset

Connect the headset.

To answer a call, press the call key. If you listen to music,

its playback pauses when there is an incoming call and resumes when

ending the call.

To end a call, press the call handling key.

If the headset was not included with your phone, you can purchase one
separately.

Internet and messaging settings

To send text and multimedia messages and access the Internet, you must

2G/3G mobile data connection and correct settings. There are a few

ways to obtain these parameters.

For most networks and mobile operators, Internet and traffic settings

messages are pre-installed on your phone. You can immediately use the Internet and

transmit messages.

In some cases, it is possible to download Internet and exchange parameters

messages when you turn on the phone for the first time. It is also possible to load these parameters later in

Settings menu.

You can manually add and change Internet and network settings on your phone at any time.

Contact your network operator for more information about Internet and sharing settings.

On the Home screen, tap.

Find and tap Settings > Sony Ericsson > Internet options.

View the current access point name

On the Home screen, tap.

Find and tap Settings > Wireless & networks > Mobile network.

Tap Access Point Name (APN).

If multiple connections are available, the active network connection will be indicated
checkbox on the right.

Manually setting the access point name

On the Home screen, tap.

Find and tap Settings > Wireless & networks > Mobile network > Hotspots
access (APN).

Tap New hotspot.

Tap Name and enter a name for the network profile you are creating.

Tap APN and enter the access point name.

Enter the additional information required to connect to your network.

For more information about the required network parameters, contact your operator.
networks.

Restoring Internet Settings to Defaults

On the Home screen, tap.

Tap Settings > Wireless & networks > Mobile network > Point names
access.

Tap Default Settings.

This is the Internet version of the document. © Print permitted for private use only.

Manual settings for GPRS Internet phones Sony Ericsson K770i, K790i, K800i, Z610i

Setting up GPRS internet MTS is carried out in two stages:

Stage 1. Create an account
1. Menu Settings Connectivity. Move the joystick down to highlight Data transmission (Data comm.) and press the joystick to confirm. Use the joystick to highlight the item Prefer. service (Preferred service) and press the joystick to confirm. Activate PS and CS. Use the joystick to highlight the item Uch. Data accounts and press the joystick to confirm. Use the joystick to select an item. In point Type of student records (Account type) select PS data. The section will open New school entry (New account) with a proposal to enter Name: (Name:)— enter any name, for example, GPRS Internet and press the joystick to confirm. Sequentially set the following parameters:

Access point (APN): internet.mts.ru

(to change, press the joystick, enter the address (delete characters - key “C”, “dot” - press the key “1” once), press the joystick to confirm)

  • Username (Username): mts (to change, press the joystick, enter a name (delete characters - “C” key), press the joystick to confirm)
  • Password (Password): mts (to change, press the joystick, enter the password (delete characters - “C” key), press the joystick to confirm)

Save (Save) on display. A list of accounts appears. From the list, use the joystick to highlight the created account GPRS Internet, press the top left key with the bar under the inscription Treason. (Edit) on display. Sequentially set the following parameters:

  • Access Point (APN): <пропустите>
  • Username (Username): <пропустите>
  • Password: <пропустите>
  • Login request: Disabled. (Off)
  • Resolution Allow calls: Automatic (to change, press the joystick, select the desired option, press the joystick to confirm)
  • IP address:<поле остается пустым>
  • DNS address: <поле остается пустым>
  • Authentication: PAP (to change, press the joystick, check the box - PAP (the check mark is set/unchecked by pressing the joystick), to confirm, press the right key under OK)
  • Data compression: <пропустите>
  • Header compression. (Header compr.): <пропустите>

Stage 2. Setting up a WEB profile.
Enter the device menu by pressing the joystick or pressing the upper right key with the bar under the inscription Menu on display. Use the joystick to highlight the item Settings and press the joystick to confirm. Move the joystick to the right to highlight a bookmark Communication (Connectivit). Move the joystick down to highlight the item Param. Internet settings and press the joystick to confirm. Select an item Prof. Internet (Internet profiles). Use the joystick to highlight an item New profile (New profile) and press the joystick to confirm. The section will open New profile. Fill out the following items in sequence:

  • Name: (Name:) WEB GPRS (to change, press the joystick, enter a name, delete characters - key “C”, press the joystick to confirm)
  • select GPRS Internet (this is the account created in step 1)

Press the key below the text Save (Save). A message appears New profile created and the phone returns to the list of profiles. From the list of profiles, select the created profile WAP GPRS and press the key under the inscription Functions (More). Select Settings. Sequentially set the following parameters:

  • Full construction. via (Connect using): leave the previously selected GPRS Internet account
  • Proxy server (Use proxy): No (to change, press the joystick, select the desired option, press the joystick to confirm)
  • Proxy address:<поле неактивно>
  • Port number: <поле неактивно>
  • Username (Username):<поле неактивно>
  • Password: <поле неактивно>

Press the top right key with the bar underneath Save (Save) on display. A list of profiles will be displayed. From the list of profiles, select the created profile WEB GPRS and press the joystick. A dot will appear next to the profile name. The device will automatically exit this submenu.
Return from the menu to standby mode by repeatedly pressing the return key.

After all the settings have been made, you need to turn off and then turn on the phone again


Sony Xperia is a smartphone based on the Android operating system. Usually, when you first install a SIM card in a smartphone, it receives automatic Internet settings.

If you did not receive these settings, you can call your operator and ask them to send the settings to your phone, but it is faster and more reliable to set up the Internet yourself. This won't take long, so get going!

To set up Internet on Sony Xperia:

1. Press the "Menu" button and select " Settings».

2. Select the “Wireless” section.

3. Check the box next to the “Mobile Internet” option

4. Enter the “Mobile networks” menu and create a new access point. To do this, come up with a name for it or simply enter the name of your operator - this way there is less confusion.

5. Then fill out the fields “ APN" (access point name), " Username" And " password"You will find the necessary data to fill out the fields in the list below. Each operator has its own settings, so be careful!

MTS: Access Point Name (APN): internet.mts.ru Username: mts Password: mts
Megafon: Access Point Name (APN): internet Username: leave blank Password: leave blank
Beeline: Access Point Name (APN): internet.beeline.ru Username: beeline Password: beeline
6. Save the settings, reboot the phone and use the Internet for your pleasure!