Set up the cryptopro software csp. Installation of cryptopro. Installing Adobe Reader

After purchasing a license from our online store, you will receive an email containing:

product license key
link to product distribution
link to user manual

Since no one likes to read the user manual anyway (and you would not be reading this article if you read the manual), we only need product license key And link to distribution.

Step 1

First you need to find out if you have installed Cryptopro CSP earlier and if installed, what version?

This can be done by carefully examining your Start menu: there should be an item CRYPTO-PRO, which has a program CryptoPro CSP.

If you didn’t find it, most likely you don’t have CryptoPRO installed, so feel free to go to.

If found - run CryptoPro CSP. There we see the General tab, where the license validity period and version number are indicated.

If the version number corresponds to the version you purchased (for example, if the window says 4.0.****, and you bought CryptoPro CSP 4.0, then it matches), then you you can not reinstall the program, but simply enter the license key. How to do it - look at .

Step 2

You found out that the program is not installed for you. So, you need to download CryptoPro CSP and install it.

Downloading it is not so easy: a cryptographic provider is a means of cryptographic protection of information, which means that its distribution is subject to registration with the relevant authorities. Therefore, you will need to follow the link that came to you in the letter or go to the CryptoPro website on your own at the link http://www.cryptopro.ru/downloads and select from the list of products CryptoPro CSP.

You will see something like this:

Click on the link " Pre-registration"and fill out a form from a variety of fields. After filling out the form and registering, you will be required to agree to the license agreement, and then still get the opportunity to download the distribution package of the program.

At the time of publication, the distribution selection page looks like this:

If you have purchased the version CryptoPro CSP 3.6, then you will need to select a version R4 It is by far the most functional.

If you have purchased a license for CryptoPro CSP 3.9 be careful: CryptoPro CSP 3.9 - certified version, but does not support Windows 10, CryptoPro CSP 3.9R2- supports Windows 10, certification planned for Q4 2015

If you bought version 4.0, then select the CryptoPro CSP 4.0 item accordingly (recommended for working with Windows 10, certification is planned for the III quarter of 2015).

You will need to download this file:

Step 3

You have downloaded the installation file CryptoPro CSP, and now you will need to install the program itself. To do this, run the installation file, if we see a security warning, you need to allow the program to make changes on your computer. In the opened press the button Install (recommended)

The installation of the program takes place automatically within a few minutes and does not require user intervention.

Everything, Installation completed.

Step 4

Now you need to enter the license key in a special window. You can get to it this way (the path may vary slightly depending on the version of the operating system):

Start - Programs - CryptoPro - CryptoPro CSP.

Then we press the button Entering a license

In the window that opens, fill in the fields in accordance with the license received.

Step 5

We rejoice! We have just installed a crypto provider. Not so difficult, right?

But you need to understand that CryptoPro CSP itself cannot do anything. The next step you will need to install (or just configure) programs that will interact with CryptoPro CSP and solve your problems, whether it is an electronic signature, encryption or something else.

Usually, or is used to implement an electronic signature - they can be purchased from our online store. We tried to make the purchase as convenient as possible: electronic licenses are sent immediately after payment (even at night), a large selection of payment methods.

If the instruction seemed useful to you - share it, you will find the buttons for this right below the article.

In the following instructions, I will show you how to install CryptoPro Office Signature , CryptoARM how to work with tokens and so on.

If you don't want to miss our articles - subscribe to us on social networks! Links to our social media pages can be found at the very bottom of the screen.

The introduction of modern means of personal identification is a huge step in the development of electronic document management. Many believe that the development of such a direction does not make practical sense, that the use of such tools is necessary only for a small number of users and nothing will exceed a simple signature in reliability and convenience, but this is far from the case.

An electronic digital signature allows you to determine the authenticity of a person in a digital workflow, which significantly increases its efficiency and saves time and money.

An electronic digital signature (or EDS) is, in fact, electronic props, which allows you to protect the digital version of any document from forgery. The legislator defines an EDS as an analogue of a handwritten signature, which is used to identify a person in electronic document management.

Types of EDS

In practice, several variants of EDS are used.

Simple EDS does not contain cryptographic protection elements. Security is ensured by using a login, password and connection codes.

In general, it is used only for the actual identification of the user, and is not used to protect a specific document.

Such a signature can still certify documents, however, this requires execution certain conditions:

adding to a specific document;
use complies with the internal rules of workflow;
the presence of information about the identity of the sender of the file.

Unskilled refers to an enhanced signature, but the degree of its protection is less than that of a qualified one. However, in this case cryptographic methods of protection are already used. Using such a signature allows not only to sign a document, but also to make changes to it with their subsequent confirmation.

Qualified i is considered the most secure option. Cryptographic protection methods are used, the confirmation of which is carried out by special authorities. It is difficult to use in practice, but there is a definite plus - reliability. You can connect such a signature only in a special certification center.

Methods, services and test results

The use of EDS is undoubtedly practical and convenient. However, each user must have the skills to check its validity, which protect against possible violations by counterparties.

Checking is not difficult. To do this, just use one of several services. So, you can check the authenticity of a document signed with an EDS by uploading it to the site crypto.kontur.ru.

This service will allow you to quickly analyze the document and get the result. To use it, you need to properly configure your computer, but it's not difficult, you just need to follow the instructions on the site.

If you can’t install the ES on your computer on your own, you should contact the certification centers. At the end of their work, an act of installing an electronic signature means is drawn up.

Certificate validity period.
Whether the signature is on the revoked list.
Whether the EDS belongs to the number issued by accredited centers.

The most popular verification method is verification through the State Services portal. However, there are many more services that are approximately the same in terms of their effectiveness.

In general, verification methods can be divided into two types:

Verification of a document signed with an EDS.
Checking the EDS itself.

Another way to check the EDS is to install the appropriate program on a PC. Typically used CryptoPro because of the many full-fledged functions for working with EDS.

The result of any verification is confirmation or non-confirmation of the authenticity of the digital signature or the document signed by it. Such services simply need to be used for work, as they fully allow you to ensure the security of electronic document management.

In the event that work through the EDS is performed on an ongoing basis, it is recommended to use the software from CryptoPro.

How to install an EDS

To install an ES on a PC, you will need to download the appropriate software and follow the instructions.

Programs

First of all, you need to install on your computer CryptoPro CSP program. Further:

Run the program in any of the ways. As an option - open the Control Panel, the "Programs" menu and find the one you need there, or find it through the search if the location is not known. The launch is performed on behalf of the administrator.
After starting the program, a window will appear in which you need to find the "Service" tab.
Next, look for the menu "View certificates in the container."
The "Browse" window appears, in which you can see information about the name of the container and the reader. Press OK.
In the next window, "Certificates in the Private Key Container", no action is required. Just skip it by clicking Next.
A window with user data will appear. You need to select "Properties".
We install a new Certificate, for this we select "Install Certificate".
In the next window, do nothing and just click "Next".
Next, you need to select the item "Place all certificates in one store", for this we click "Browse" and select the "Personal" folder.
The last step is to click "Finish".

Plugins

There is also a useful plugin from CryptoPro that allows you to create and verify signatures on web pages. CryptoPro EDS Browser plug-in can work with any modern browser, including Chrome and Yandex.

Sign documents for electronic document management.
Validate web form data.
Notarize any files sent from the user's computer.
Sign messages.

Using the plug-in, you can check both a regular ES and an improved one. An important plus is that it is distributed completely free of charge.

No special skills are required to install the plugin, everything happens automatically. You just need to run the installer file, then select "Run", "Next" and "OK". The program will do everything itself.

Copying materials is allowed only when using an active link to this site.

Installing and configuring CryptoPro to work with an electronic signature

To participate in electronic trading, each entrepreneur must have their own digital signature. EDS acts as an analogue of a handwritten signature that gives legal force to an electronic document. To participate in electronic auctions on public procurement websites, it is necessary to provide high guarantees for the reliability and authenticity of the submitted signature in the application for participation in the tender and in all related documentation. In order to authenticate persons signing electronic documents, the CryptoPro cryptographic utility was created, which allows generating and verifying an EDS.

A little about keys

To obtain your own digital signature, you must contact a certified certification authority (CA), which issues a root certificate, as well as a public and private key.

CA root certificate is a file with the .cer extension that allows the system to identify the certification authority.

Subscriber public key is a nominal file of the owner of the electronic key used to verify the validity and authenticity of the signed document. The public key can be published and sent anywhere and to anyone, it is public information.

Private key of the subscriber is a set of encrypted files stored on an electronic medium. The owner of the private key uses a secret pin code for authorization in the system, therefore, if it is lost, the subscriber must immediately revoke his key through a certification center.

After receiving the electronic signature, it is necessary to install the software on the computer to work with the digital signature. The cryptographic provider CryptoPro 3.6 supports the state standards of the Russian Federation: GOST R 34.10–2001, GOST R 34.11–94 and GOST R 34.10–94.

The main purpose of CryptoPro

Ensuring the process of giving legal significance to electronic documents through the use of EDS;
Ensuring confidentiality and integrity control of encrypted information;
Integrity control and protection of software from unauthorized changes.

The CryptoPro 3.6 utility is compatible with the following operating systems:

After the release of Microsoft Windows 10, CryptoPro also updates its software and certifies the new version of CryptoPro CSP 4.0

Installing and configuring CryptoPro

On the official site cryptopro.ru, you need to purchase the required version of the utility and install the crypto provider. Launch CryptoPro CSP and, using the installer's prompts, install the utility on your computer.
Next, you need to install the e-ID support driver. Private keys can be stored on floppy disks, smart cards and other electronic media, but tokens in the form of a USB key fob (eToken, Rutoken) are considered the most convenient analogue. For the correct operation of the media, we install the appropriate driver.
Then you need to configure the readers. We launch CryptoPro as an administrator and in the window that opens we find the "Hardware" tab and click "Configure readers". In the "Manage readers" window that opens, click "Add". Select the desired reader (for example, for eToken, select AKS ifdh 0). After installation, click "Finish".
Let's move on to installing a personal digital signature user certificate. In the "Service" tab, click "Install personal certificate". Specify the path to the certificate file with the .cer extension.
Next, insert the token into the computer's USB port, indicating the private key storage container. To configure in automatic mode, you can check the box next to "Find container automatically". The system will prompt you to enter a PIN code and place a personal certificate in the store. After installation, click Finish.
Let's move on to setting up the browser to work with the public procurement portal. The site zakupki.gov.ru works only with the Internet Explorer browser. In the browser properties, select the "Security" tab in which you should select "Trusted Sites" and click "Sites". In the window that opens, you need to register the following websites:

Next, you need to go to the public procurement website and in the left menu column in the "Additional" section, find the "Documents" item and click "Files to configure the workplace." Download all output files and install.

How to check the work of the EDS?

Below is a related video:

How to install cryptopro on a computer step by step where to start

EDS certificate(electronic digital signature) is, in fact, a set of numbers. The generation of these numbers occurs when a document is encrypted, which is based on personal data necessary to identify the user. After receiving a digital signature in the certification center, it must be installed. Only after that, you can use it. We will advise you.

Before installing the EDS make sure you have the program CryptoPro CSP. The absence of this program excludes the possibility of using a digital signature. Download CryptoPro you can go to official site developers. This is a paid program, however, you will be given a free trial period that will last for 3 months.

Let's assume the program CryptoPro already installed on your personal computer. The following steps will tell you how to install a CAP certificate on a computer:

Open on your computer Control Panel". In the panel window, select from the list of programs CryptoPro. Run it by double-clicking the mouse (left button);

In the window of the running program, from the list of various tabs, select the tab “ Service”;

In the tab that opens, click on the column “ View certificates in a container”;

Next, in the window that appears, click on “ Overview". This window shows the available reader and container name. Review the information received, then click “ OK”;

The window that opens is titled “ Certificates in a private key container". Press " Further” without any changes and input of information;

A window will open that tells about the user, the serial number of the electronic signature and its validity period. Select " Properties”;

In the certificate window that appears, you need to install a new one. This is easy to do by clicking on " Install Certificate”;

“ Certificate Import Wizard". Read the information provided and click " Further”;

In the new window, select the item called " Place all certificates…”. Click on the button " Overview”;

Now you know how to install a digital signature certificate on a computer. Enjoy simplicity and ease of work with a unique electronic digital signature.

Tell your friends on social networks

comments 3

I did the installation algorithm, but I can’t enter my personal account on public procurement

How to install CryptoPro - how to install a certificate in CryptoPro?

CryptoPRO is a cryptographic provider that allows you to generate a digital signature and makes it possible to work with key certificates. The process of installing CryptoPRO on a personal computer is the subject of this article. Let's consider in detail how to install CryptoPro CSP for free.

The description of this process is contained in the user manual on the official website, which is also attached when purchasing a license. Let's analyze the procedure step by step.

CryptoPro plugin is not installed in the browser

Before starting work, the user needs to make sure that an outdated version of the product is not installed on his PC. The check is performed in the menu if the CryptoPRO item is absent, therefore CryptoPro plugin is not installed in the browser.

If the item of interest in the menu is found, you need to check if the version is outdated. To do this, launch CryptoPRO, in the License Management tab in the right window, look at the version number and license validity period.

Download CryptoPRO CSP

After it turns out that not installed CryptoPro EDS browser plug in, proceed to download CryptoPRO CSP and install it on your PC.

Since the provider is a means of cryptographic protection of information, accordingly, its distribution is recorded in certain supervisory authorities. In order to download the program, you will need to register. Then follow the link sent to your email. By clicking on it, we select CryptoPRO CSP from the list of products.

Installing CryptoPRO on a computer R

The installation file is downloaded before how to install CryptoPRO on a computer. To install, run the file. If the security system issues a warning, then you need to allow the program to make changes to your PC. Next, click "Install" and wait a few minutes. User participation is not required at this stage. After installation, it is recommended to restart your computer.

CryptoPRO license key

Now enter the license key.

We look for CryptoPRO in programs, select CryptoPRO CSP
Enter the serial number.

Check that the installed version matches the one you purchased. If you have version 4.0, then, accordingly, choose CryptoPRO CSP 4.0. This version is recommended for Windows 10.

The description of this process is contained in the user manual on the official website, which is also attached when purchasing a license. Let's analyze the procedure step by step.

Download CryptoPRO CSP

After it turns out that not installed CryptoPro EDS browser plug in, proceed to download CryptoPRO CSP and install it on your PC.

Installation CryptoPRO on a computer R

CryptoPRO license key

Now enter the license key.

We look for CryptoPRO in programs, select CryptoPRO CSP
Enter the serial number.

Check that the installed version matches the one you purchased. If you have version 4.0, then, accordingly, choose CryptoPRO CSP 4.0. This version is recommended for Windows 10.

CryptoPRO Certificate

Since the entire electronic document flow will be recorded by EDS, you need to know how to install a certificate in the Crypto PRO registry.

Through the start go to the control panel.
We select CryptoPRO and go to the "Service".
Next, click "View Certificates in Container".
We look for our certificate, select it, and the download starts automatically.
In the storage selection window, click Browse and select "Personal". Click next and OK.
Wait for the notification that the certificate was successfully installed.

CIPF(means of cryptographic information protection) "CryptoPro CSP" is an independent OS module designed to perform various crypto-operations, such as electronic signature, encryption, imitation protection. The functioning of the vast majority of encryption software products is impossible without a crypto provider, and it is also impossible to sign ES documents.

The functionality of the CryptoPro CSP module is that it:

allows you to submit reports electronically to various government agencies;
provides participation in electronic auctions;
organizes legally significant document circulation;
protects confidential information at the time of its transmission.

Module "CryptoPro CSP" developed by "CRYPTO-PRO" - a company that is one of the leaders in the market of information security tools. For this period, 5 versions of the CryptoPro CSP module have been released, the difference between which lies in the following parameters: the operating system in which the program operates; supported cryptoalgorithms; the validity period of certificates issued by the competent authorities. The developer company posted a table with a detailed comparison of all current versions of the CryptoPro CSP module on its official Internet resource. On this web page, the developer company has posted information about valid certificates.

How to install "CryptoPro 4.0"

The latest actual version of the CryptoPro CSP module is the fourth, which operates on the basis of new signature algorithms in accordance with GOST R 34.10-2012. "CryptoPro CSP 4.0" can work in Windows 10. At the moment, this module is not certified, but the developer company plans to certify the 4th version of its product in the very near future.
The following is a description of how to install "CryptoPro 4.0".
The official Internet resource of the CRYPTO-PRO developer company, upon completion of the preliminary registration, provides the opportunity to download files, distributions, updates, etc. of the CryptoPro CSP program.

Upon completion of registration, a page with a license agreement will appear. You must read its terms and conditions and then, if you agree with them, click on "I agree". Next, you will be redirected to the file download page.

In order to download the distribution, you must first select "CryptoPro CSP 4.0 for Windows and UNIX (non-certified)", and then left-click on "CryptoPro CSP 4.0 for Windows" in the link with checksum information that appears.

How to install "CryptoPro 4.0". When the download is complete, you need to run the newly downloaded program file "CSPSetup.exe". In the window that opens about the security warning, in order to allow the program to make changes to the computer, you need to click on the "Yes" button. In the next window that opens, select "Install (recommended)".

The direct installation of the CryptoPro CSP 4.0 module will begin, which takes a few seconds.

Upon completion of the installation of the CryptoPro CSP 4.0 module on the computer, you can start working with it.

Reminder:

under the terms of the license agreement, there is a limitation on the period of use of the demo version of "CryptoPro CSP 4.0", which is 90 days from the date of direct installation of the product;
The demo version of the "CryptoPro CSP 4.0" module is provided only during the initial installation of the product; in case of re-installation, the program will not work in demo mode.

Information about the type of license and the period of its validity is available in the CryptoPro CSP application. In the Windows 10 operating system, it is most convenient to use the application search, for which you need to click on the "Magnifying glass" icon, which is located next to "Start", and then select "CryptoPro CSP Classic Application".

A new “CryptoPro CSP” window will appear, where the “General” tab contains information about the license (incomplete serial number; owner’s name; company name; license type: client or service; period of validity; when the initial installation was carried out, etc.). d.). Here you can also purchase a license online and enter its serial number.

The operation of the CryptoPro CSP 4.0 module is carried out during the entire period of the license. If the current license has expired, then you need to buy the right to a new one. This can be done at any convenient time. The license key (i.e. its serial number) is sent to the specified email address immediately after payment is received.
To enter a new serial number, you must click on "Enter license". A window will open in which in the item "Serial number" you should specify the purchased license key and then click on "OK".

After completing all the installation steps, the CryptoPro CSP 4.0 program is completely ready for use.

Installation via the View Certificates in Container menu

1. Select "Start" > "Control Panel" > "CryptoPro CSP", go to the "Tools" tab and click on the "View Certificates in Container" button.

2. In the window that opens, click the Browse button to select a container to view. After selecting the container, click on the "OK" button.

3. In the window that opens, click the "Next" button.

4. In the next window, click the button« Install”, and then affirmatively answer the certificate replacement notification (if it appears). The certificate is installed.

5. If the "Install" button is missing, then in the "Certificate for viewing" window, click on the "Properties" button.

6. In the window that opens, select Install Certificate.

7. In the Certificate Import Wizard window, select Next . In the next window, leave the radio button on Automatically select a store based on certificate type and click Next. The certificate will be installed in the Personal store.

8. In the next window, select "Next", then click on the button "Finish" and wait for the message about successful installation.

Installation via the menu "Install personal certificate"

For installation, you will need a certificate file (a file with the .cer extension). The certificate file can be exported from the Personal store. If the store does not contain the required certificate, contact technical support at [email protected], indicating the TIN and KPP of the organization and the essence of the problem.

1. Select Start > Control Panel > CryptoPro CSP. In the CryptoPro CSP Properties window, go to the "Service" tab and click on the "Install personal certificate" button.

2. In the "Certificate Import Wizard" window, click on the "Next" button. In the next window, click on the Browse button and select the certificate file.

4. In the next window, click on the "Next" button.

5. Click the Browse button .

6. Specify the private key container corresponding to the certificate and click the OK button.

7. After selecting the container, click on the "Next" button .

8. In the Select Certificate Store window, click the Browse button.

If CryptoPro CSP 3.6 R2 (product version 3.6.6497) or higher is installed, then check the box "Install certificate in container".

9. Select the Private storage and click OK.

10. After selecting the storage, click on the Next button, then Finish. After clicking on the Done button, you may be asked to replace the existing certificate with a new one. In the prompt window, select Yes.

Wait for a message about successful installation. The certificate is installed.