Connecting and setting up a Samsung digital TV to a global network via WIFI. Connecting a TV to the Internet via wifi: instructions for smart TV and regular TV

We are gradually moving into the world of Internet of things, where every gadget is able to connect to the global network. TVs are no exception. Depending on the model, you can connect to the network directly via a cable using a router or TV set-top box. The setup is not difficult. You can cope with it yourself without the help of specialists.

What TVs can be connected to the Internet?

First of all, of course, these are devices with the Smart TV function or its analogue. This is a special integration technology that allows you to use various online functions directly on the TV. If the documentation indicates support for Smart TV, then your TV can be guaranteed to connect to the network. Typically, this is done directly or via Wi-Fi. Carefully study the technical manual, and if in doubt, we recommend that you find your TV in an online store and make sure that this technology is supported.

You can connect to the Internet and TV without this function. However, you will need a special TV box. The connection uses an HDMI cable. This allows you to turn any TV into a smart TV, even without a LAN port or built-in Wi-Fi. We will talk about the intricacies of setting up a TV set-top box later.

What is required to connect

Before starting the procedure, you need to make sure that you have a few things. This list includes:

Internet access point and router, if you plan to use the latter;
LAN cable (for direct connection);
instructions for TV;
knowing your own IP address (may be needed during setup).

Connection methods

Direct connection via cable

The method implies that the design has a built-in LAN input. Then you need to take the cable from the provider and insert it into the appropriate port. If the provider "hands out" a dynamic IP, no user manipulation is needed. The TV will automatically get its IP and you will be able to open all internet services.

If you are provided with a static IP, then set the settings manually. To do this, follow the steps of the instruction:

Now you can check the serviceability of the services, since the Internet should work.

Through a router

In most apartments and houses, the home network is organized using a router. It allows you to connect several devices to the network: a computer, TV, laptop, and so on. Depending on the type of router, connect your TV via cable or Wi-Fi.

By cable

The method requires you to take the following steps:

If you encounter problems, you can try updating the firmware of the router or the TV itself.

By WiFi

If you don't want to bother with wires, you can use a wireless connection. Your TV must have a built-in Wi-Fi module. To activate it, follow the instructions:

Fast and convenient. Please note that some TVs support WPS technology, thanks to which you do not need to enter a password.

What to do if there is no Wi-Fi module?

In stores, you can buy special Wi-Fi adapters that will allow you to connect your TV to a wireless network. There is only one condition - the device must have a USB input. Wi-Fi adapters are visually similar to a flash drive, while they have a relatively affordable cost. For home use, it is not necessary to buy top models.

Please note that there is a list of compatible adapters for specific TVs. As a rule, they are created by the TV manufacturer. Computer models are often incompatible. The most popular gadgets include LG AN-WF100, AN-WF500, Samsung WIS12ABGNX/NWT and PhilIPs PTA128/00.

Using WPS

This technique will bypass the input of authorization data.

Via PC or laptop

Users can also connect the TV to a personal computer or laptop. In this case, the device can operate in two modes:

Image repeat. The TV will act as a regular screen. It is allowed to use a browser or watch movies through it, but control will be carried out through a PC / laptop. It is enough to connect the device via HDMI or VGA.
Reading data from a computer. When organizing a local network, you can open access to data on a computer. This allows you to watch movies or listen to music that is stored on your computer's hard drive.

The last point is an extremely convenient option if you do not want to watch movies over the Internet due to low speed. You can download them to your computer, and then watch directly from the HDD without the help of a flash drive.

The setup details vary by model, but in general you need to follow a series of steps:

make sure the TV is connected to your home local network (when using a router) or connected directly to the PC;
you need to download and install a media server on your computer;
add files to share and open them on the TV.

One of the most popular programs is the "Home Media Server". You can download it for free online. Consider an example of setting up this software:

As a media server, try Plex, Serviio, Kodi. Each of the options has its pros and cons.

Via TV box

Many providers offer to buy an additional set-top box. It already has built-in services for watching TV, a browser and a home theater. In fact, this is an analogue of SmartTV. The set-top box connects to the router via a LAN cable or Wi-Fi, and to the TV via HDMI. IP settings, if necessary, are already performed in the sections of the set-top box itself.

You can also buy your own Android set-top box. It is similar to a mobile phone, but with a redesigned interface for a large screen. You can download applications from the Play Market and use them from your TV. Messengers, Skype, mail and more will be available directly from TV.

Via PLC adapter

If you have a standard modem without Wi-Fi support and an STB receiver, then the connection can be made via an Ethernet cable. But this is not always practical if the wire has nowhere to hide. An alternative solution is a PLC adapter. This is a special device that transmits a useful signal through a standard electrical network. Connection by this method is offered by Rostelecom, Beeline and other companies.

The latest adapters support data rates up to 1 gigabit per second. Adapters must be inserted directly into the outlet, bypassing adapters and uninterruptible power supplies. This will provide the best signal. The adapter and TV can be connected directly via Ethernet.

Smart TVs have become very popular due to their capabilities. Internet access directly from the TV allows you to watch videos online and access a lot of information on the network. Various applications make it easier to find your favorite video and open up new horizons for the user. Samsung has been improving the Smart functionality of its TVs for a long time. Obviously, to realize all the possibilities of "smart" TVs, you need to connect to the network. However, not all users know how to connect Samsung Smart TV to the Internet via cable.

Connecting via a cable allows you to make a reliable connection with a good data transfer rate. Please note that in order to avoid problems with the speed of loading pages, as well as the speed of applications and services, you must have an Internet channel with good bandwidth. If your Internet speed is less than 10Mbps, then problems may arise. There are several ways to connect your Samsung Smart TV to the Internet using a LAN cable. We will analyze each of them in detail.

Also, after connecting, in some cases it is necessary to manually configure the Internet connection parameters. In most cases, the setup happens automatically, but this may not happen. Do not worry too much, you will not be left without the Internet. After all, we will also analyze all the necessary settings that will need to be carried out, and describe the problems that you may encounter.

Wired connection methods

Let's take a closer look at how to connect Samsung Smart TV to the Internet via cable. The first way is to use a standard LAN cable to connect the Ethernet connector on your TV and on an external modem.

The second method involves the use of a router. But we will not connect using a wireless connection, but using a cable. Use a LAN cable and connect the Ethernet jacks on your TV and router. The router must first be connected to an external modem and configured.

The third method involves directly connecting the TV to the provider's network. Using a LAN cable, connect the Ethernet jack on your TV to the Ethernet jack on your ISP's network, which is usually located on a wall or other designated location.

Thus, we have listed all the situations that you may encounter if you want to connect your Samsung Smart TV to the Internet via cable. Next, we will analyze the features of the connection settings.

After you have made a wired connection, you need to configure the TV. Press the "Menu" button on the TV remote control, then go to the "Network" tab and find the "Network settings" item.

A window should open on the TV screen, the appearance of which will depend on the specific model of your TV. Don't worry, the semantic content of the windows is preserved. In the window that appears, click "Next".

Since we want to connect Samsung Smart TV to the Internet via cable, select the type of network connection "Cable" and click "Next".

The internet connection is now complete. The TV will receive all settings automatically. A successful connection message will appear on the TV screen. If there are no problems, click "Next". If the Internet is not connected to the TV, then you need to manually configure the connection. To do this, select the item " IP settings».

A settings window will appear in front of you. In the items "IP Mode" and "DNS Mode" by default, the "Automatic" mode should be set. You need to enter “Manual” instead. If you want to properly connect Samsung Smart TV to the Internet via cable, you need to find out all the necessary settings from your Internet provider and enter them manually. Required parameters are underlined. If you have a computer that is connected to the Internet with a cable, you can see the necessary parameters on it.

On your computer, find "Local Area Connection" and click "Details". A window with all settings will appear. After that, connecting the TV to the Internet should work.

findings

As you can see, connecting a Samsung Smart TV to the Internet with a cable is not very difficult. Everyone will be able to independently connect and configure. The main difficulties may arise when setting up a connection. In most cases, the setup is automatic, if not, do the setup manually, as we described above.

Often after buying their first TV with SmartTV, users wonder how to connect the TV to the Internet via cable. This issue is especially relevant for low-cost TVs that are not equipped with a Wi-Fi module.

We connect the TV to the Internet through a cable from the router

If you have a router and want to use it to connect the TV to the Internet, then in addition to the TV itself and the router (naturally, the router must be configured and in working order) you will need a network cable. The network cable must be long enough for you to lay it in a convenient way, and the cable must be crimped on both sides. If these two conditions are met, then you can proceed directly to connecting the TV.

Step number 1. Connect the network cable to the router.

First we need to connect the network cable to the router. To do this is extremely simple. Just plug the cable into any of the free LAN ports. It will be difficult to miss and stick in the wrong place, since the WAN port (which is used to connect to the Internet provider) should already be busy.

Step number 2. We connect the network cable to the TV.

Step number 3. Checking the Internet.

If the TV was turned on when the network cable was connected, then a message should have appeared on the screen that it was connected to a wired network.

If the TV was turned off, then you can go to SmartTV and open the browser. If the pages are loading, then the TV connection to the Internet via cable was successful.

Below we will look at a few typical questions that may arise when connecting a TV.

What to do if the TV is already connected via Wi-Fi

If your TV is already connected to the Internet via Wi-Fi, it may not respond to a cable connection. In this case, you need to press the "Settings" button on the remote control and go to "Network - Network Connection".

There it will be possible to change the wireless network to a wired one and thus switch to using a cable.

How to set static IP addresses on the TV

If you need to manually set up the connection and set static IP addresses to connect your TV to the Internet via cable, you can do that as well. To do this, go to the network selection window, as described above, and click on the "Manual" button.

After that, manual network settings will appear on the screen. Here you can specify a static IP address for the TV, as well as a subnet mask, gateway and DNS.

How to find out the MAC address of the TV

The need to find out the MAC address of the TV may arise in various situations. For example, if you want to connect your TV not through a router, but directly to an Internet provider.

So, in order to find out the MAC address of the TV, you need to press the "Settings" button on the remote control and go to "Network - Network Status".

This will open a window with information about the network status, where the MAC address will be indicated, as well as other information about the connection.

You can also find out the MAC address of the TV by going to “Settings Support - Info. about the product/service"

Hello.

In recent years, the development of technology has been proceeding at such a rapid pace that what seemed like a fairy tale yesterday is a reality today! I say this to the fact that today, even without a computer, you can already browse the Internet pages, watch videos on youtube and do other things on the Internet using a TV!

But for this, of course, it must be connected to the Internet. In this article, I would like to focus on the recently popular Samsung Smart TVs, consider setting up Smart TV + Wi-Fi (such a service in the store, by the way, is not the cheapest) step by step, and analyze the most common typical questions.

So, let's begin…

1. What should I do before setting up the TV?

In this article, as mentioned a couple of lines above, I will only consider connecting a TV via Wi-Fi. In general, you can, of course, connect the TV via cable to the router, but in this case you will have to pull the cable, extra wires under your feet, and if you want to move the TV, then plus more extra hassle.

Many people think that Wi-Fi cannot always provide a stable connection, sometimes the connection breaks, etc. In fact, it depends more on your router. If the router is good and does not break the connection when loading (by the way, they break the connection at high load, most often, routers with a weak processor) + you have good and fast Internet (in large cities, there seems to be no problems with this now) - then the connection is you will have what you need and nothing will slow you down. By the way, about - there was a separate article.

Before proceeding with the settings directly to the TV, here's what you need to do.

1) First decide whether your TV model has a built-in Wi-Fi adapter. If it is - well, if it is not - then to connect to the Internet, you need to purchase a wi-fi adapter connected via USB.

Attention! Each TV model has its own, so be careful when buying.

Adapter for connecting via wi-fi.

2) The second important step would be - router setup(). If your devices (for example, a phone, tablet or laptop), which are also connected via Wi-Fi to the router, have Internet access, then everything is in order. In general, how to set up a router for Internet access is a large and extensive topic, especially since it will not fit into the framework of one post. Here I will give only links to the settings of popular models:,.

2. Set up your Samsung Smart TV to connect to the Internet via Wi-Fi

Usually, when you first start the TV, it automatically prompts you to configure. Most likely, this step has been skipped by you for a long time, because. the TV was most likely turned on for the first time in a store, or even in some kind of warehouse ...

By the way, if a cable (twisted pair) is not connected to the TV, for example, from the same router, by default, when setting up the network, it will start searching for wireless connections.

Let's take a look at the configuration process itself step by step.

1) First, go to the settings and go to the "network" tab, we are most interested in "network settings". On the remote, by the way, there is a special button "settings" (or settings).

2) By the way, a hint is shown on the right that this tab is used to set up a network connection and use various Internet services.

4) In this step, the TV asks us to indicate what type of connection to use: cable or wireless Wi-Fi connection. In our case, select wireless and click "next".

5) For 10-15 seconds, the TV will search for all wireless networks, among which yours should be found. By the way, please note that the search range will be carried out in 2.4 Hz, plus the network name (SSID) - the one that you set in the router settings.

6) Surely, there are several Wi-Fi networks at once, because in cities, usually, some neighbors also have routers installed and turned on. Here you need to select your wireless network. If your wireless network is password protected, you will need to enter it.

Most often, after that, an Internet connection will be established automatically.

Next, you just have to go to the "menu->> support->> Smart Hub". Smart Hub is a special feature in Samsung Smart TVs that allows you to access various sources of information on the Internet. You can watch web pages or youtube videos.

3. What should I do if the TV does not connect to the Internet?

In general, of course, there can be many reasons why the TV did not connect to the Internet. Most often, of course, these are incorrect router settings. If other devices, except for the TV, also cannot access the Internet (for example, a laptop), then you definitely need to dig in the direction of the router. If other devices work, but the TV does not, let's try to consider several reasons below.

1) First, try at the stage of setting up the TV when connecting to a wireless network, set the settings not automatically but manually. At first

As a rule, after entering the settings manually, the TV joins the wireless network and gains access to the Internet.

2) Secondly, after you have carried out the procedure for manually assigning a specific IP address to the TV, I recommend that you go into the router settings again and enter the MAC address of the TV and other devices in the settings - so that every time you connect to a wireless network, each device is given its permanent IP address. About setting up different types of routers -.

3) Sometimes a simple reboot of the router and TV helps. Turn them off for a minute or two, and then turn them on again and repeat the setup procedure.

4) If, when watching an Internet video, for example, videos from youtube, your playback constantly “twitches”: the video either stops or loads - most likely there is not enough speed. There are several reasons: either the router is weak and cuts the speed (it can be replaced with a more powerful one), or the Internet channel is loaded with another device (laptop, computer, etc.), it may be worth switching to a higher speed tariff from your Internet provider.

5) If the router and the TV are in different rooms, for example, behind three concrete walls, the connection quality may be worse due to which the speed will be reduced or the connection will periodically break. If so, try placing the router and TV closer to each other.

6) If the TV and the router have WPS buttons, you can try to connect devices in automatic mode. To do this, you need to hold down the button on one device for 10-15 seconds. and on the other. Most often, devices quickly and automatically connect.

That's all. Happy connections everyone...

Most modern TVs are no longer just repeaters of analog or digital television, they have such features as Smart TV, communication via Skype and much more. But most of the new features that have appeared are based on one paramount one - access from the TV to the Internet. It is thanks to Internet access that you can fully use Smart TV, watch movies from the Internet, chat on Skype, add and use other TV functions. How to set up Internet on TV, a paramount task that arises immediately after its purchase. In this article, I will show in detail how to connect a TV (suitable for any TV - LG, Philips, Samsung, Sony, etc.) to the Internet using a LAN cable.

Almost all modern TVs have functionality that allows them to access the Internet. It remains only to connect and configure it. There are two ways to connect your TV to the Internet:

1 With network cable;

2 Using a Wi-Fi wireless connection.

Connecting the cable to the TV is not as easy as it might seem at first glance, because you need to understand where this cable comes from, where one of its ends is connected. And here there are two options:

1 The network cable is connected to the router;

2 The network cable comes from the entrance (provider's cable).

Let's analyze each of the options in more detail.

Connecting the TV to the Internet with an ISP network cable.

This method does not require any additional devices and at first it may seem that everything is simple, but this is not entirely true. The thing is that providers use various connection technologies, such as PPPoE, L2TP, Dynamic IP, Static IP. It is on what technology your provider uses that the settings that need to be made on the TV in order for the Internet to work there depend. You can find out what technology your provider uses by looking at the contract with the provider or by calling technical support. Next, I propose to disassemble each of the connection technologies:

Dynamic IP. If your ISP uses Dynamic IP, you need a minimum of effort:

1 Connect the network cable of the provider to the TV;

2 Make sure your TV is set to Automatic search for network settings.

For example, I will describe how to do this on LG TVs with webOS.

Press the "Settings" button on the normal remote control.

If you have a remote magic, press the "Input" button.

Select the gear icon.

Then select "Network" - "Wired Ethernet Connection". There you should see the inscription "Connected to the Internet", if so, then congratulations, you have set up the Internet on your TV.

If you have the message " No connection to the Internet via Ethernet", select this connection and make sure that automatic network settings are set there.

Static IP. With this connection method, you need to find out your network settings from the contract with the provider and register them in the TV settings. We do everything step by step:

1 Connect the provider's network cable to the TV's LAN port.

2 Go to the TV settings and write down the network settings of the provider.

For example, on LG TVs, press the "Settings" button, select from the menu - "Network" - "Wired Ethernet Connection",

Uncheck "Automatically" and write down the IP address, mask, gateway, DNS issued by the provider.

PPPoE, L2TP. Unfortunately, very few TVs allow you to set up the Internet if your provider provides the Internet using PPPoE, L2TP technologies. And for most, the way out of this situation is to use a router to connect the TV to the Internet.

Setting up the Internet on the TV when connected via a router.

For this method, it is necessary that the Internet is already configured on the router (you can find how to configure the router in other articles on our website). Connect one end of the cable to any LAN port on the router.

The other end of the cable to the TV.

Go to your TV settings. On LG TVs, for this, on a regular remote control, press the "Settings" button

or "Input" button on the remote magic

and select the gear icon.

Go to the "Network" - "Wired Ethernet" menu and make sure that "Connected to the Internet" is indicated below this inscription.

If this is not the case, check that the TV receives network settings automatically by selecting an Ethernet connection. Click the "Edit" button.

And check the "Automatic" box.

Thus, without much effort, using a LAN network cable, you can set up the Internet on any TV (LG, Philips, Samsung, Sony, etc.).