Soviet post-war anti-tank artillery. Anti-tank guns of the ussr germany of the war period Artillery of the red army
If you believe the statistics, in all the battles of the Great Patriotic War, including the famous Prokhorovka, our tankers suffered the heaviest losses by no means from German panzers - the most dangerous enemy was not the famous "Tigers", "Panthers" and "Ferdinands", not the legendary "Things", not sappers and faustniks, not formidable Akht-Akht anti-aircraft guns, but Panzerabwehrkanonen - German anti-tank artillery. And if at the beginning of the war the Nazis themselves dubbed their 37-mm anti-tank gun Pak 35/36 a “door knocker” (virtually useless against the latest KV and “thirty-four”, it nevertheless burned like BT and T-26 matches), then not 50 -mm Pak 38, neither the 75-mm Pak 40, nor the 88-mm Pak 43, nor the heavy-duty 128-mm Pak 80 deserved any disparaging nicknames, becoming real "tank killers". Unsurpassed armor penetration, the best optics in the world, a low, inconspicuous silhouette, superbly trained crews, competent commanders, excellent communications and artillery reconnaissance - for several years the German anti-tank defense knew no equal, and our anti-tankers surpassed the German ones only at the very end of the war.
In this book you will find comprehensive information about all the anti-tank artillery systems that were in service with the Wehrmacht, including captured ones, about their advantages and disadvantages, organization and combat use, defeats and victories, as well as top-secret reports on their tests at Soviet training grounds. The edition is illustrated with exclusive drawings and photographs.
Sections of this page:
GERMAN-MADE ANTI-TANK GUN
28/20 mm heavy anti-tank rifle s.Pz.B.41 (schwere Panzerbuchse 41)
Although according to the classification of the Wehrmacht, this weapon belongs to the class of heavy anti-tank rifles, but in terms of caliber and design it is more likely an artillery system. Therefore, the author considered it necessary to tell in the work about the anti-tank artillery of the Wehrmacht and about this sample.
The development of an automatic anti-tank gun with a conical bore designed by Gerlich began at Mauser at the end of 1939. Initially, the gun had the index MK8202. In the breech, the barrel of the gun had a caliber of 28 mm, and at the muzzle - 20 mm. For firing from it, specially designed projectiles were used, consisting of a tungsten carbide core, a steel pallet and a ballistic tip. The pallet had two annular protrusions, which, when the projectile moved in the bore, were compressed, crashing into the rifling.
Thus, the most complete use of the pressure of powder gases at the bottom of the projectile was ensured, and, accordingly, a high initial velocity was achieved. However, in the course of design and testing, the MK8202 automatic gun was transformed into a single-shot heavy anti-tank rifle s.Pz.B.41, which, after testing in June - July 1940, was adopted by the Wehrmacht.
The anti-tank gun had a horizontal wedge semi-automatic shutter (opened manually), which provided a fairly high rate of fire - 12-15 rounds per minute. To reduce the recoil energy, the barrel was equipped with a muzzle brake. s.Pz.B.41 was mounted on a light artillery-type wheeled carriage with sliding beds. To protect the calculation of two people served as a double shield (3 and 3 mm). A design feature of the heavy anti-tank gun was the absence of lifting and turning mechanisms. Aiming at the target in the vertical plane was carried out by swinging the barrel on the trunnions, and in the horizontal plane - by turning the rotating part manually (using two handles) on the lower machine.
A little later, a lightweight version of the gun carriage was developed for a heavy anti-tank rifle, which was put into service with the parachute units of the Luftwaffe. It consisted of a single frame with runners, on which small wheels could be mounted to move around the area. This gun, which received the designation s.Pz.B.41 leFL 41, had a mass of 139 kg (on a conventional carriage 223 kg).
s. The Pz.B.41 had a very high muzzle velocity of the PzGr41 armor-piercing projectile weighing 131 g - 1402 m/s. Thanks to this, armor penetration (at an angle of 30 degrees) was: at 100 m - 52 mm, at 300 m - 46 mm, at 500 m - 40 mm and at 1000 m - 25 mm, which was one of the best indicators for this caliber. In 1941, in the s. Pz.B.41 included a fragmentation projectile weighing 85 g, but its effectiveness was very low.
The disadvantages of the s.Pz.B.41 were the high manufacturing cost - 4,500 Reichsmarks and heavy barrel wear. At first, its survivability was only 250 shots, then this figure was increased to 500. In addition, extremely scarce tungsten was used to produce shells for the s.Pz.B.41.
By the beginning of 1941, the tungsten reserves at the disposal of Germany amounted to 483 tons. Of these, 97 tons were spent on the production of 7.92-mm cartridges with a tungsten core, 2 tons on various other needs, and the remaining 384 tons were spent on the manufacture of sub-caliber shells. In total, more than 68,4600 such shells were manufactured for tank, anti-tank and anti-aircraft guns. In connection with the depletion of tungsten stocks, the release of these shells was stopped in November 1943.
For the same reason, in September 1943, after the production of 2,797 s.Pz.B.41s, its production was stopped.
s. Pz.B.41s mainly entered service with Wehrmacht infantry divisions, Luftwaffe airfield and parachute divisions, which were used until the end of the war. As of March 1, 1945, the units had 775 s.Pz.B.41s, another 78 units were in warehouses.
37 mm anti-tank gun Pak 35/36 (3.7 cm Panzerabwehrkanone 35/36)
The development of this anti-tank gun began at the company Rheinmetall-Borsig (Rheinmetall-Borsig) back in 1924, and the design was carried out in circumvention of the terms of the Versailles Peace Treaty, according to which Germany was forbidden to have anti-tank artillery. However, at the end of 1928, the first samples of the new gun, which received the designation 3.7-cm Tak 28 L / 45 (Tankabwehrkanone - anti-tank gun, the word Panzer began to be used in Germany later. - Note. author), began to enter the troops.
The 37-mm anti-tank gun Tak 28 L / 45 weighing 435 kg had a light carriage with tubular beds, on which a monoblock barrel with a semi-automatic horizontal wedge breech was mounted, which provided a fairly high rate of fire - up to 20 rounds per minute. The angle of horizontal fire with the extended beds was 60 degrees, but if necessary, it was possible to fire with the shifted beds. The cannon had wooden spoked wheels and was transported by a team of horses. To protect the calculation, a shield from a 5-mm armor plate was used, and its upper part leaned back on hinges.
Without a doubt, by the end of the 1920s, the 37 mm Tak 29 gun was one of the best anti-tank artillery systems. Therefore, its export version was developed - So 29, which was purchased by many countries - Turkey, Holland, Spain, Italy, Japan and. Some of them also acquired a license for the production of weapons (suffice it to recall our famous forty-five - a 45-mm anti-tank gun 19K, the main anti-tank weapon of the Red Army in the 1930s and early 1940s, leading its lineage from the 37-mm Tak 29, purchased in 1930 year).
In 1934, the gun was modernized - it received wheels with pneumatic tires that allowed the gun to be towed by cars, an improved sight and a slightly modified carriage design. Under the designation 3.7-cm Pak 35/36 (Panzerabwehrkanone 35/36), it entered service with the Reichswehr, and from March 1935 with the Wehrmacht as the main anti-tank weapon. Its price was 5,730 Reichsmarks in 1939 prices. As new 37-mm Pak 35/36 cannons, manufactured before 1934, Tak L / 45 29 with wooden wheels, were removed from the troops.
In 1936-1939, the Pak 35/36 was baptized by fire during the Spanish Civil War - these guns were used by both the Condor Legion and the Spanish nationalists. The results of combat use turned out to be very good - the Pak 35/36 could successfully fight the Soviet T-26 and BT-5 tanks, which were in service with the Republicans, at a distance of 700-800 m (it was the collision with the 37-mm anti-tank gun in Spain that forced the Soviet tank builders start work on the creation of tanks with anti-shell armor).
During the French campaign, it turned out that 37-mm anti-tank guns were ineffective against British and French tanks, which had armor up to 70 mm. Therefore, the command of the Wehrmacht decided to accelerate the deployment of more powerful anti-tank artillery systems. The end of the Pak 35/36 career was the campaign against the USSR, during which they were completely powerless against the KV and T-34 tanks. For example, in one of the reports in June 1941, it was said that the calculation of the 37-mm gun achieved 23 hits on the T-34 tank without any result. Therefore, it is not surprising that soon the Rak 35/36 in the army began to be called the "army mallet". In January 1942, the production of these guns was discontinued. In total, since the start of production in 1928, 16,539 Pak 35/36 (including Tak L / 45 29) were manufactured, of which 5,339 guns were made in 1939-1942.
In addition to the usual version of the Pak 35/36, a slightly lighter version was developed for arming the parachute units of the Luftwaffe. He received the designation 3.7-cm Rak auf leihter Feldafette (3.7-cm Rak leFLat). This gun was intended for air transport on the external sling of a Ju 52 transport aircraft. Externally, the 3,7-cm Pak leFLat practically did not differ from the Pak 35/36, very few of them were made.
Initially, two types of unitary cartridges with armor-piercing (PzGr 39) or fragmentation (SprGr) shells were used for firing from Pak 35/36. The first weighing 0.68 kg was a conventional hard alloy blank with a bottom fuse and a tracer. To combat manpower, a fragmentation projectile weighing 0.625 kg with an instant head fuse was used.
In 1940, after a collision with British and French tanks that had thick armor, the PzGr 40 sub-caliber projectile with a tungsten carbide core was introduced into the Pak 35/36 ammunition load. True, due to the small mass - 0.368 g - it was effective at distances up to 400 m.
At the end of 1941, specifically to combat the Soviet T-34 and KV tanks, they developed the Stielgranate 41 cumulative over-caliber grenade. Outwardly, it looked like a mortar mine with a cumulative warhead 740 mm long and weighing 8.51 kg, inserted into the gun barrel from the outside. The Stielgranate 41 was launched by firing a blank round and stabilized in flight by four small wings at the rear. Naturally, the firing range of such a mine left much to be desired: although according to the instructions it was 300 m, in fact it was possible to hit the target only at a distance of up to 100 m, and even then with great difficulty. Therefore, despite the fact that the Stielgranate 41 penetrated 90 mm armor, its effectiveness in combat conditions was very low.
The 37 mm Pak 35/36 anti-tank gun was the main anti-tank weapon of the Wehrmacht at the beginning of World War II. It was in service with all units - infantry, cavalry, tanks. Subsequently, these guns were mainly used as part of infantry divisions, as well as tank destroyer divisions. In 1941, the replacement of the Pak 35/36 with more powerful 50-mm Pak 38 anti-tank guns began, and later with the 75-mm Pak 40. Nevertheless, the 37-mm anti-tank guns remained in service with the Wehrmacht until the end of the war. As of March 1, 1945, the troops still had 216 Pak 35/36, another 670 guns were in warehouses and arsenals.
Pak 35/36 were installed on German armored personnel carriers Sd.Kfz.250/10 and Sd. Kfz.251 / 10, as well as in small quantities for Krupp trucks, one-ton half-track tractors Sd.Kfz. 10, captured French Renault UE wedges, Soviet Komsomolets semi-armored tractors and British Universal armored personnel carriers.
42 mm Pak 41 anti-tank gun (42 cm Panzerabwehrkanone 41)
The development of a light anti-tank gun with a tapered bore, designated 4.2-cm Pak 41, began in the autumn of 1941 by Mauser. The new gun, like the s.Pz.B.41, had a barrel of variable caliber from 42 to 28 mm (in fact, the actual caliber of the Pak 41 was 40.3 and 29 mm, but 42 and 28 mm are used in all literature. - Author's note). Due to the tapering bore, the most complete use of the pressure of powder gases on the bottom of the projectile was ensured, and, accordingly, a high initial velocity was achieved. To reduce wear on the Pak 41 barrel, a special steel with a high content of tungsten, molybdenum and vanadium was used in its manufacture. The gun had a horizontal wedge semi-automatic breech, which provided a rate of fire of 10-12 rounds per minute. The barrel was placed on the carriage of a 37 mm Pak 35/36 anti-tank gun. With the beds extended, the angle of horizontal fire was 41 degrees.
The gun ammunition included special unitary shots with high-explosive fragmentation and armor-piercing shells. The design of the latter was the same as that of the heavy anti-tank rifle s.Pz.B.41 caliber 28/20 mm. The shells had a special design of the leading part, which allowed its diameter to decrease as the projectile moved in the conical bore.
Tests of the 4.2-cm Pak 41 showed excellent results - at a distance of 1000 m, its 336 g shells confidently pierced 40-mm armor plate. The production of the new gun was transferred from Mauser to Billerer & Kunz in Aschersleben, where 37 of them were made by the end of 1941. Production of the Pak 41 was discontinued in June 1941 after 313 guns had been built. The price of one sample was 7,800 Reichsmarks. The operation of the 4.2-cm Pak 41 showed a low survivability of its barrel, despite the use of special alloys in its design - only 500 shots (about 10 times less than that of the 37-mm Pak 35/36). In addition, the manufacture of the barrels themselves was a very complex and expensive procedure, and the production of armor-piercing shells required tungsten - a metal that was in great short supply for the Third Reich.
4.2-cm Pak 41 anti-tank guns entered service with tank destroyer divisions of Wehrmacht infantry divisions and Luftwaffe airfield divisions. These guns were in service until mid-1944, and were used on the Soviet-German front and in North Africa. As of 1 March 1945, nine Pak 41s were at the front and 17 more in storage.
50 mm Pak 38 anti-tank gun (5 cm Panzerabwehrkanone 38)
In 1935, Rheinmetall-Borsig began developing a more powerful 50 mm anti-tank gun than the Pak 35/36. The first samples of the new artillery system, designated Pak 37, were manufactured and submitted for testing in 1936. With a mass of 585 kg, the gun had a barrel length of 2,280 mm and an initial velocity of an armor-piercing projectile of 685 m/s. However, the military was not satisfied with the test results, in particular the armor penetration and unstable carriage design. Therefore, Rheinmetall-Borsig redesigned the carriage, lengthened the barrel to 3,000 m and developed more powerful ammunition. As a result, the weight of the gun increased to 990 kg, the speed of the armor-piercing projectile - up to 835 m / s, and at a distance of 500 m it pierced armor 60 mm thick. After eliminating a number of minor defects and passing tests, the 50-mm anti-tank gun, which received the designation Pak 38, was adopted by the Wehrmacht.
Like the Pak 35/36, the new gun had a sliding-bed carriage, providing a horizontal firing angle of 65 degrees. Solid wheels with solid rubber tires and coil springs made it possible to transport the Pak 38 at speeds up to 40 km/h. Moreover, when bringing the gun into a combat position and breeding the beds, the suspension of the wheels was automatically turned off, and when they were brought together, it turned on. The gun had a monoblock barrel and a semi-automatic horizontal wedge bolt, which provided a rate of fire of up to 14 rounds per minute.
Pak 38 had two shields - upper and lower. The first consisted of two 4-mm armor plates of complex shape, installed with a gap of 20-25 mm and provided protection for the calculation in front and a little from the sides. The second, 4 mm thick, was hung on hinges under the wheel axle and protected the calculation from being hit by fragments from below. In addition, the gun received a new firing mechanism, an improved sight, and a muzzle brake to reduce muzzle recoil. Despite the fact that, to facilitate the design, a number of carriage parts were made of aluminum (for example, tubular beds), the weight of the Pak 38 more than doubled compared to the Pak 35/36 and amounted to 1000 kg. Therefore, to facilitate the rolling of the gun by the crew, the Pak 38 was manually equipped with a light one-wheeled limber, to which flattened beds could be attached. The result was a three-wheeled structure, which the calculation of seven people could move around the battlefield. Moreover, to facilitate maneuvering, the front wheel could turn.
Serial production of the Pak 38 began at the Rheinmetall-Borsig factories in 1939, but only two guns were made by the end of the year. The new anti-tank guns did not see action in France - the first 17 Pak 38s only entered service in July 1940. However, the past campaign served as an impetus to accelerate the release of the Pak 38, since during the fighting the Wehrmacht encountered thick-armored tanks, against which the Pak 35/36 were practically powerless. As a result, by July 1, 1941, 1047 guns were manufactured, of which there were about 800 in the troops.
By order of the High Command of the Ground Forces dated November 19, 1940, a 1-ton Sd.Kfz half-track tractor was identified as a vehicle for towing the Pak 38. 10. However, due to their shortage, on January 16, 1941, a new order appeared, according to which 1.5-ton trucks were to be used to transport 50-mm anti-tank guns. However, during the war, captured French Renault UE tankettes, Krupp trucks and much more were used to tow the Pak 38.
Three types of unitary shots were used for firing from the Pak 38: fragmentation, armor-piercing tracer and sub-caliber. A fragmentation projectile Sprenggranate weighing 1.81 kg was equipped with a charge of cast TNT (0.175 kg). In addition, to improve the visibility of the explosion, a small smoke bomb was placed in the explosive charge.
Armor-piercing tracer shots had two types of projectiles: PzGr 39 and PzGr 40. The first, weighing 2.05 kg, was equipped with a hard steel head welded to the projectile body, a leading iron belt and had a bursting charge of 0.16 kg. At a range of 500 m, the PzGr 39 could penetrate 65 mm armor when fired at the normal.
The PzGr 40 sub-caliber projectile consisted of an armor-piercing tungsten core in a coil-shaped steel shell. To improve aerodynamic properties, a plastic ballistic tip was attached to the top of the projectile. At a range of 500 m, the PzGr 40 could penetrate 75 mm thick armor when fired at the normal.
In 1943, for the Pak 38, they developed the Stielgranate 42 over-caliber cumulative anti-tank grenade (similar to the one for the Pak 35/36) weighing 13.5 kg (including 2.3 kg of explosives). The grenade was inserted into the barrel from the outside and fired using a blank charge. However, although the armor penetration of the Stielgranate 42 was 180 mm, it was effective at a distance of up to 150 meters. A total of 12,500 Stielgranate 42s were made before March 1, 1945 for the Pak 38 guns.
The 50 mm Pak 38 anti-tank guns could fight the Soviet T-34s at medium ranges, and at short ranges with short range. True, they had to pay for this with heavy losses: only in the period from December 1, 1941 to February 2, 1942, the Wehrmacht lost 269 Pak 38 in battles. And this is only irretrievable, not counting the disabled and evacuated (some of them also could not be restored).
The 50 mm Pak 38 anti-tank guns were produced until the fall of 1943, with a total of 9,568 made. For the most part, they entered service with tank destroyer divisions in infantry, panzergrenadier, tank and a number of other divisions. From the second half of 1944, this gun was mainly used in training units and second line troops.
Unlike other German anti-tank guns, Pak 38s were practically not used for various self-propelled installations. This gun was mounted only on the chassis of a semi-armored 1-ton Sd.Kfz. 10 (several of these self-propelled guns were used in the SS troops), on several Sd.Kfz. 250 (one such machine is in the military museum in Belgrade), two VK901 based on the Marder II and one example of the Minitionsschlepper (VK302).
75 mm Pak 40 anti-tank gun (7.5 cm Panzerabwehrkanone 40)
The development of a new 75-mm anti-tank gun, designated Pak 40, began at Rheinmetall-Borsig back in 1938. The very next year, the first prototypes were tested, which initially consisted of a 75-mm Pak 38 gun enlarged to a caliber. However, it soon became clear that many of the technical solutions used for 50-mm guns were not suitable for a 75-mm caliber. For example, this concerned the tubular parts of the carriage, which in the Pak 38 were made of aluminum. When testing Pak 40 prototypes, the aluminum parts quickly failed. This, as well as a number of other problems that emerged during the tests, forced the Rheinmetall-Borsig company to improve the design of the Pak 40. But due to the fact that the Wehrmacht did not yet feel the need for a gun more powerful than the Pak 38, the design of the Pak 40 went slow enough.
The campaign against the USSR was the impetus for accelerating work on the 75-mm anti-tank gun. Faced with the T-34 tanks and especially the KV, the anti-tank units of the Wehrmacht were unable to deal with them. Therefore, Rheinmetall-Borsig was instructed to urgently complete work on the 75-mm Pak 40 gun.
In December 1941, prototypes of the new anti-tank gun were tested, in January 1942 it was put into production, and in February the first 15 serial Pak 40s entered the army.
The gun had a monoblock barrel with a muzzle brake, which absorbs a significant part of the recoil energy, and a horizontal wedge semi-automatic shutter, providing a rate of fire of up to 14 rounds per minute. A carriage with sliding beds provided a horizontal firing angle of up to 58 degrees. For transportation, the gun had sprung wheels with solid rubber tires, which made it possible to tow it at speeds up to 40 km / h with mechanical traction and 15–20 km / h with horses. The gun was equipped with pneumatic marching brakes, which were controlled from the cab of a tractor or car. In addition, it was possible to brake manually, using two levers located on both sides of the gun carriage.
To protect the calculation, the gun had a shield cover, consisting of upper and lower shields. The upper one, fixed on the upper machine, consisted of two armor plates 4 mm thick, installed at a distance of 25 mm from each other. The lower one was attached to the lower machine, and one half of it could recline on hinges.
The cost of the gun was 12,000 Reichsmarks.
The ammunition load of the Pak 40 gun included unitary shots with a fragmentation grenade SprGr weighing 5.74 kg, an armor-piercing tracer PzGr 39 (a hard alloy blank weighing 6.8 kg with 17 g of tracer composition), a sub-caliber PzGr 40 (weighing 4.1 kg with tungsten carbide core) and cumulative HL.Gr (weighing 4.6 kg) shells.
The gun could successfully fight all types of tanks of the Red Army and its allies at long and medium distances. For example, PzGr 39 pierced 80 mm armor at a distance of 1000 m, and PzGt40-87-mm. The cumulative HL.Gr was used to fight tanks at distances up to 600 m, while it was guaranteed to penetrate 90 mm armor.
Pak 40 was the most successful and most massive anti-tank gun of the Wehrmacht during the Second World War. Its production steadily increased: in 1942 the average monthly output was 176 guns, in 1943 - 728 and in 1944 - 977. The peak of Pak 40 production was in October 1944, when 1050 guns were managed to be manufactured. In the future, in connection with the mass bombing of German industrial enterprises by allied aircraft, the output began to decline. But despite this, from January to April 1945, the Wehrmacht received another 721 75-mm anti-tank guns. A total of 23,303 Pak 40 guns were produced between 1942 and 1945. There were several variants of the Pak 40, differing from each other in the design of wheels (solid and spoked) and muzzle brakes.
75-mm anti-tank guns entered service with tank destroyer divisions of infantry, panzergrenadier, tank and a number of other divisions, as well as, to a lesser extent, in individual tank destroyer divisions. Constantly being at the forefront, these guns suffered huge losses in battles. For example, over the last 4 months of 1944, the Wehrmacht lost 2490 Pak 40s, of which 669 in September, 1020 in October, 494 in November and 307 in December. 17,596 of these guns were lost, 5,228 Pak 40s were at the front (of which 4,695 were on a wheeled carriage) and another 84 were in warehouses and in training units.
The 75-mm Pak 40 anti-tank gun was used in large numbers to arm various self-propelled guns on tank chassis, armored personnel carriers and armored cars. In 1942-1945, it was installed on self-propelled guns Marder II (on the chassis of the Pz.ll tank, 576 units) and Marder II (on the chassis of the Pz. 38(t) tank, 1756 units), armored personnel carriers Sd.Kfz. 251/22 (302 pieces), armored vehicles Sd.Kfz. 234/4 (89 pieces), RSO tracked tractors with an armored cab (60 pieces), based on captured French armored vehicles (Lorraine tractor, H-39 and FCM 36 tanks, armored personnel carrier on a Somua MCG half-track chassis, 220 pieces in total). Thus, for the entire period of mass production of the Pak 40, at least 3,003 units were installed on various chassis, not counting those subsequently used for repairs (this is about 13% of all artillery systems produced).
At the end of 1942, the Heller Brothers (Gebr. Heller) in Nurtingen developed and manufactured the 75-mm Pak 42 anti-tank gun, which was a modernized version of the Pak 40 with a barrel length of 71 calibers (the usual Pak 40 has a barrel length of 46 calibers ). According to German data, after testing, 253 such guns were made on a field gun carriage, after which their production was stopped. Subsequently, the Pz.IV (A) Pz.IV (V) tank destroyers began to arm the Pak 42 cannons (with the muzzle brake removed). As for the Pak 42 on the field carriage, their photographs, data on entering the troops or on combat use have not yet been found. The only image of the Pak 42 known to date is of its installation on a 3-ton half-track tractor chassis.
75/55 mm Pak 41 anti-tank gun (7.5 cm Panzerabwehrkanone 41)
The development of this gun began by Krupp in parallel with the design of the Rheinmetall-Borsig 75-mm Pak 40. However, unlike the latter, the Krupp gun, which received the designation Pak 41, had a variable-caliber barrel like the 42-mm Pak 41. The first prototypes were made at the end of 1941.
The gun had a rather original design. The barrel was mounted in a spherical support of a two-layer shield (two 7-mm armor plates). Beds and a sprung axle with wheels were attached to the shield. Thus, the main load-bearing structure of the Pak 41 was a double shield.
The barrel of the gun had a variable caliber from 75 mm in the breech to 55 mm at the muzzle, but did not taper along the entire length, but consisted of three sections. The first, starting at the breech with a length of 2,950 mm, had a caliber of 75 mm, then there was a 950 mm conical section, tapering from 75 to 55 mm, and finally the last 420 mm long had a caliber of 55 mm. Thanks to this design, the middle conical section, which was subjected to the greatest wear during firing, could be replaced without problems even in the field. To reduce the recoil energy, the barrel had a slotted muzzle brake.
The 75-mm anti-tank gun with a conical bore Pak 41 was adopted by the Wehrmacht in the spring of 1942, and in April - May, Krupp manufactured 150 such guns, after which their production was stopped. Pak 41 was quite expensive - the cost of one gun was more than 15,000 Reichsmarks.
The Pak 41 ammunition included unitary shots with armor-piercing shells PzGr 41 NK weighing 2.56 kg (per 1000 m pierced armor 136 mm thick) and PzGr 41 (W) weighing 2.5 kg (145 mm per 1000 m), as well as fragmentation Spr Gr.
Ammunition for Pak 41 had the same arrangement as for 28/20 mm Pz.B.41 and 42 mm Pak 41 with tapered bores. However, initially they were supplied to the front in insufficient quantities, since extremely scarce tungsten was used to make armor-piercing PzGr.
The 75 mm Pak 41 anti-tank guns entered service with the tank destroyer battalions of several infantry divisions. Due to the high muzzle velocity of the projectile, they could successfully fight almost all types of Soviet, British and American tanks. However, due to the rapid wear of the barrel and the shortage of tungsten, from the middle of 1943 they began to be gradually withdrawn from the troops. Nevertheless, as of March 1, 1945, the Wehrmacht still had 11 Pak 41s, although only three of them were at the front.
75 mm Pak 97/38 anti-tank gun (7.5 cm Panzerabwehrkanone 97/38)
Faced with Soviet T-34 and KV tanks, the Germans hastily began to develop means to combat them. One of the measures was the use of 75-mm French field gun barrels of the 1897 model of the year for this - several thousand of these guns were captured by the Wehrmacht during campaigns in Poland and France (the Poles bought these guns from the French in the 1920s in quite large quantities). In addition, a large amount of ammunition for these artillery systems fell into the hands of the Germans: there were more than 5.5 million of them in France alone!
The guns entered service with the Wehrmacht as field guns under the designation: for the Polish - 7.5 cm F. K.97 (p), and for the French - 7.5 cm F. K.231 (f). The difference was that the Polish guns had wooden wheels with spokes - guns were produced with them in France during the First World War, and horse teams were used to transport them in the Polish army. The guns that were in service with the French army were modernized in the 1930s, having received metal wheels with rubber tires. This made it possible to tow them with the help of tractors at speeds up to 40 km / h. F. K. 97 (p) and F. K. 231 (f) in limited quantities entered service with several second-class divisions, and were also used in coastal defense in France and Norway. For example, as of March 1, 1944, the Wehrmacht included 683 F. K.231 (f) (of which 300 were in France, two in Italy, 340 on the Soviet-German front and 41 in Norway) and 26 Polish F.K.97 (p), which were on the Soviet-German front.
The use of cannons of the 1897 model for fighting tanks was difficult, primarily because of the design of a single-bar gun carriage, which allowed an angle of fire along the horizon of only 6 degrees. Therefore, the Germans put the barrel of a 75 mm French gun, equipped with a muzzle brake, on a 50 mm Pak 38 carriage and received a new anti-tank gun, which was given the designation 7.5 cm Pak 97/38. True, its price was quite high - 9,000 Reichsmarks. Despite the fact that the gun had a piston breech, its rate of fire was up to 12 rounds per minute. For firing, shots developed by the Germans with an armor-piercing projectile PzGr and a cumulative HL.Gr 38/97 were used. Fragmentation was used only by the French, which received the designation SprGr 230/1 (f) and SprGr 233/1 (f) in the Wehrmacht.
Production of the Pak 97/38 began in early 1942 and ended in July 1943. Moreover, the last 160 guns were made on the carriage of the Pak 40 guns, they received the designation Pak 97/40. Compared to the Pak 97/38, the new artillery system became heavier (1425 vs. 1270 kg), but the ballistic data remained the same. In just a year and a half of mass production, 3712 Pak 97/38 and Pak 97/40 were manufactured. They entered service with tank destroyer divisions in infantry divisions and several others. As of March 1, 1945, the Wehrmacht still had 122 Pak 97/38 and F. K.231 (f) guns, and only 14 of this number were at the front.
Pak 97/38 were mounted on the chassis of the captured Soviet T-26 tank - in 1943 several such units were manufactured.
75 mm Pak 50 anti-tank gun (7.5 cm Panzerabwehrkanone 50)
Due to the large mass of the 75-mm Pak 40 anti-tank gun, which made it difficult to move around the battlefield by the crew, in April 1944 an attempt was made to create its lightweight version. To do this, the barrel was shortened by 1205 mm, equipped with a more powerful three-chamber muzzle brake and mounted on a Pak 38 carriage. For firing from a new gun, designated Pak 50, shells from Pak 40 were used, but the dimensions of the sleeve and the weight of the powder charge were reduced. The test results showed that the mass of the Pak 50 compared to the Pak 40 did not decrease as much as expected - the fact is that when installing a 75 mm barrel on a Pak 38 carriage, all of its aluminum parts had to be replaced with steel ones. In addition, tests showed that the armor penetration of the new gun was significantly reduced.
However, in May 1944, the Pak 50 began to be mass-produced, and by August 358 had been produced, after which production was discontinued.
Pak 50 entered service with infantry and panzergrenadier divisions and were used in combat from September 1944.
7.62-mm Pak 36 (r) anti-tank gun (7.62-cm Panzerabwehrkanone 36 (r))
Faced with the T-34 and KV tanks, the German 37-mm Pak 35/36 anti-tank guns were practically powerless, the 50-mm Pak 38 was not enough in the troops, and they were not always effective. Therefore, along with the deployment of mass production of a more powerful 75-mm Pak 40 anti-tank gun, which took time, the search for a temporary measure of anti-tank combat began hastily.
A way out was found in the use of captured Soviet 76.2-mm divisional guns of the 1936 model (F-22), which were captured quite a lot by Wehrmacht units in the first months of the war.
The development of the F-22 began in 1934 at the design bureau of V.G. Grabin as part of the creation of the so-called universal artillery system, which could be used as a howitzer, anti-tank and divisional. The first prototypes were tested in June 1935, after which a meeting was held in the presence of the leaders of the Red Army and the government of the USSR.
As a result, it was decided to stop work on a universal gun and create a divisional one on its basis. After a series of improvements, on May 11, 1936, the new artillery system was adopted by the Red Army as a 76.2-mm divisional gun of the 1936 model.
The gun, which received the factory index F-22, was mounted on a gun carriage with two riveted box-section beds, moving apart in the firing position (this was a novelty for guns of this class), which provided a horizontal firing angle of 60 degrees. The use of a semi-automatic wedge shutter made it possible to increase the rate of fire to 15 rounds per minute. Due to the fact that the F-22 was originally designed as a universal one, it had a fairly large elevation angle - 75 degrees, which made it possible to conduct barrage fire on aircraft. The disadvantages of the gun include a rather large mass (1620–1700 kg) and overall dimensions, as well as the location of the drives of the lifting and turning mechanism on opposite sides of the breech (lifting flywheel on the right, rotary on the left). The latter made it very difficult to fire at moving targets, such as tanks. The production of the F-22 was carried out in 1937-1939, in total 2956 of these guns were made.
According to German data, they got a little more than 1000 F-22s as trophies during the summer-autumn campaign of 1941, more than 150 in the battles near Moscow and more than 100 during Operation Blau in July 1942 (we are talking about serviceable samples) . The 76.2-mm F-22 guns entered service with the Wehrmacht under the designation F. K.296 (r) and were used as a field gun (F. K. (Feldkanone) - field gun), which had an armor-piercing projectile and could quite successfully fight Soviet tanks.
In addition, part of the F-22 was converted into anti-tank guns, which received the designation Panzerabverkanone 36 (russland) or Pak 36 (r) - "anti-tank gun model 1936 (Russian)". At the same time, the Germans developed new, more powerful ammunition for this gun, for which they had to squander the chamber (the new ammunition had a sleeve 716 mm long against the original Soviet 385 mm). Since a large elevation angle was not required for the anti-tank gun, the sector of the lifting mechanism was limited to an angle of 18 degrees, which made it possible to move the flywheel for pointing the gun vertically from the right side to the left side. In addition, the Pak 36(r) received a height-cut shield and a dual-chamber muzzle brake to reduce recoil energy.
As a result of the modernization, the Wehrmacht had a fairly powerful anti-tank gun at its disposal, which could successfully fight the Soviet T-34 and KV tanks at distances up to 1000 m. th (and for self-propelled artillery - until January 1944), in total, the Wehrmacht received 560 such artillery systems on a field machine and 894 for installation on self-propelled guns. But here an explanation must be given. The fact is that the number of manufactured guns in the towed version most likely included the 76.2-mm Pak 39 (r) anti-tank guns (see the next chapter), since the Germans in the documents often did not make a difference between the Pak 36 (r) and Pak 39(r). According to some reports, the latter could be up to 300 pieces.
The ammunition load of the Pak 36 (r) gun included unitary shots developed by the Germans with an armor-piercing projectile PzGr 39 weighing 2.5 kg, a sub-caliber PzGr 40 weighing 2.1 kg (with a tungsten core) and a fragmentation SprGr 39 weighing 6.25 kg.
Pak 36(r) were mounted on the chassis of the Pz.II Ausf.D and Pz.38(t) tanks and were used as tank destroyers. On a field carriage, these guns were mainly used by infantry divisions. Pak 36 (r) were used in combat operations in North Africa and on the Soviet-German front. As of March 1, 1945, the Wehrmacht still had 165 Pak 36 (u) and Pak 39 (r), some of which were in warehouses.
7.62-mm Pak 39 (r) anti-tank gun (7.62-cm Panzerabwehrkanone 39 (r))
It was generally accepted that only the F-22 was converted by the Germans into an anti-tank one, since it had a strong breech. However, the 76.2-mm F-22USV divisional guns of pre-war production were also subjected to similar alterations, since their breech and barrel design almost did not differ from the F-22. In addition, the indicated gun was 220–250 kg lighter than the F-22 and had a 710 mm shorter barrel.
The development of a new 76.2 mm divisional gun for the Red Army began in 1938, as the F-22 produced was too complex, expensive and heavy. The new gun, which received the factory designation F-22USV (F-22 improved), was designed at the design bureau under the leadership of V. Grabin as soon as possible - a prototype was ready in seven months after the start of work. This was achieved by using more than 50% of parts from the F-22 in the new artillery system. Like the base model, the F-22USV received a wedge-shaped semi-automatic breech block, providing a rate of fire of up to 15 rounds per minute, and a riveted carriage, which allowed for horizontal firing up to 60 degrees. The design of the recoil brake, shield, upper and lower machine tools, lifting and turning mechanisms was changed (although, like on the F-22, their drives were on opposite sides of the trunk), suspension systems, tires from the ZIS-5 car were used. After testing in the fall of 1939, the new gun was adopted by the Red Army as the 76.2-mm divisional gun of the 1939 model (USV). In 1939-1940, 1150 F-22USVs were manufactured, in 1941-2661 and in 1942 - 6046. Moreover, in 1941-1942, 6890 units were produced by Plant No. 221 Barricades in Stalingrad under the USV-BR index, and they differed in a number parts from F-22USV guns manufactured at factory No. 92.
During the first year of the war, the Germans got quite a lot of 76.2-mm F-22USV and USV-BR as trophies. They entered service with the Wehrmacht as field guns under the designation F. K.296 (r). However, tests have shown that these guns can be successfully used as anti-tank guns, significantly increasing their armor penetration.
The Germans squandered the F-22USV charging chamber for the use of a shot developed for the Pak 36 (r), installed a two-chamber muzzle brake on the barrel, and moved the vertical aiming flywheel to the left side. In this form, the gun, which received the designation Panzerabverkanone 39 (russland) or Pak 39 (r) - "anti-tank gun of the 1939 model of the year (Russian)" began to enter service with the anti-tank units of the Wehrmacht. Moreover, only guns produced in 1940-1941 were reworked - the German tests of the USV-BR, 76-mm ZIS-3, and also the F-22USV made after the summer of 1941 showed that their breech was no longer as strong as that of pre-war production guns, and therefore it was not possible to convert them into Pak 39 (r).
Unfortunately, the exact number of Pak 39 (r) produced could not be found - the Germans often did not separate them from Pak 36 (r). According to some sources, up to 300 of these guns were produced in total. Also missing are ballistics and armor penetration data for the Pak 39(r).
88 mm Pak 43 anti-tank gun (8.8 cm Panzerabwebrkanone 43)
The design of a new 88-mm anti-tank gun began by Rheinmetall-Borsig in the fall of 1942, and the ballistics from the Flak 41 anti-aircraft gun of the same caliber was used as the base. Due to the workload of the company with other orders at the end of 1942, the refinement and production of the 88-mm anti-tank gun, which received the designation Pak 43, was transferred to the Weserhutte company.
Pak 43 had a barrel length of almost seven meters with a powerful muzzle brake and a horizontal wedge semi-automatic shutter. As a legacy from the anti-aircraft guns, the gun got a cruciform carriage, which was equipped with two two-wheeled passages for transportation. Although this design made the gun heavier, it provided circular fire along the horizon, which was important when fighting tanks.
The horizontal installation of the gun was carried out by levels with special jacks located at the ends of the longitudinal beam of the gun carriage. To protect the calculation from bullets and shell fragments, a shield of 5 mm armor was used, installed at a large angle to the vertical. The mass of the gun was more than 4.5 tons, so it was planned to use only 8-ton Sd.Kfz half-track tractors for towing it. 7.
The Pak 43 ammunition included unitary shots with armor-piercing (PzGr 39/43 weighing 10.2 kg), sub-caliber tungsten carbide core (PzGr 40/43 weighing 7.3 kg), cumulative (HLGr) and fragmentation (SprGr) shells. The gun had very good data - it could easily hit all types of Soviet, American and British tanks at distances of the order of 2500 m.
Due to the high loads that occur during firing, the Pak 43 had a relatively short barrel life, ranging from 1200 to 2000 rounds.
In addition, the use of early-release projectiles, which had a narrower leading belt than those produced later, led to accelerated barrel wear up to 800-1200 shots.
For a number of reasons, the Weserhutte company was able to master the production of Pak 43 only in December 1943, when the first six serial samples were made. These guns were produced until the end of the war and entered service with individual divisions of tank destroyers. A total of 2,098 Pak 43s were manufactured before April 1, 1945. In addition to the field gun carriage, a small number of Pak 43 barrels (about 100) were installed on Nashorn tank destroyers (based on the Pz.IV) in 1944-1945.
Without a doubt, the Pak 43 was the most powerful anti-tank gun of World War II, not inferior even to the Soviet 100 mm BS-3 (not counting the 128 mm Pak 80, which were made by several dozen). However, for high efficiency in the fight against tanks, one had to pay with a large mass of the gun and its almost zero mobility on the battlefield - it took more than one minute to install the Pak 43 on the move (or remove it from them). And on the battlefield, this often led to losses in materiel and personnel.
88 mm Pak 43/41 anti-tank gun (8.8 cm Panzerabwebrkanone 43/41)
Due to the delay in the production of the 88-mm Pak 43 anti-tank gun on a cross-shaped carriage, the Wehrmacht command instructed the Rheinmetall-Borsig company to urgently take measures to provide the army with these guns, which were required for the upcoming summer campaign of 1943 on the Soviet-German front.
To speed up the work, the company used a carriage from its experimental 105-mm K 41 gun with wheels from a 150-mm FH18 heavy howitzer, superimposing the Pak 43 barrel on it. The result was a new anti-tank gun, which received the designation Pak 43/41.
Due to the presence of sliding frames, the gun had a horizontal firing angle of 56 degrees.
To protect the calculation from bullets and shell fragments, the Pak 43/41 was equipped with a shield mounted on the upper machine. The mass of the gun was, although less than that of the Pak 43 - 4380 kg, but still not so much that it could be moved on the battlefield by calculation forces. The ballistics and ammunition used by the Pak 43/41 were the same as those of the Pak 43.
Production of the new guns began in February 1943, when 23 Pak 43/41s were assembled. However, a few days later they were handed over to equip Hornisse tank destroyers (later renamed Nashorn). Due to the fact that 88-mm anti-tank guns went into service with Hornisse, it was not until April 1943 that the first Pak 43/41 on a field carriage entered the troops. Production of these guns continued until the spring of 1944, with a total of 1,403 Pak 43/41s produced.
Like the Pak 43, these guns entered service with individual tank destroyer battalions. As of March 1, 1945, there were 1,049 88 mm anti-tank guns (Pak 43 and Pak 43/41) at the front, and another 135 were in warehouses and in spare parts. For its large overall dimensions, the Pak 43/41 gun received the army nickname "Scheunentor" (barn gate).
128 mm Pak 44 and Pak 80 anti-tank guns (12.8 cm Panzerabwebrkanone 44 and 80)
The design of a 128-mm anti-tank gun began in 1943, and the Flak 40 anti-aircraft gun with good ballistic data was used as the base. The first prototypes were manufactured by Krupp and Rheinmetall-Borsig, but after testing, the Krupp gun was accepted for serial production, which in December 1943 began to be produced under the designation Pak 44 and until March 1944 18 such guns were manufactured.
The gun was mounted on a specially designed cruciform carriage, which provided 360-degree horizontal fire. Due to the presence of a semi-automatic shutter, the gun, despite the use of separate loading shots, had a rate of fire of up to five rounds per minute. For transportation, the Pak 44 was equipped with four wheels with rubber tires, which allowed it to be transported at speeds up to 35 km / h. Due to the large mass of the artillery system - more than 10 tons - only 12 or 18-ton half-track tractors could tow it.
The Pak 44 ammunition included separate loading shots with an armor-piercing projectile weighing 28.3 kg and 28 kg fragmentation. The armor penetration of the Pak 44 was 200 mm at a distance of 1.5 kilometers. It could hit any Soviet, American or English tank at distances beyond their reach. In addition, due to the large mass of the projectile, when it hit the tank, even without breaking through the armor, in 90% of cases it still failed.
In February 1944, the production of 128-mm Pak 80 anti-tank guns began. They differed from Pak 44 mainly in the absence of a muzzle brake, and these guns were used by Jagdtiger heavy tank destroyers and Mans tanks. In the spring of 1944, Krupp produced two samples, designated K 81/1 and K 81/2, respectively. The first was a Pak 80 barrel mounted on a captured French 155 mm Canon de 155 mm Grand Puissance Filloux cannon. With a mass of 12197 kg, it had a horizontal shelling of 60 degrees. It used the same ammunition as the Pak 80.
The 128 mm K 81/2 was a Pak 80 barrel equipped with a muzzle brake and mounted on the carriage of a captured Soviet 152 mm ML-20 howitzer-gun. Compared to the K 81/1, this artillery system was lighter -8302 kg and had a horizontal firing angle of 58 degrees.
On October 25, 1944, the main decision was made at Hitler's headquarters to install 52 Pak 80 barrels on French and Soviet carriages and use them as anti-tank guns. On November 8, the state of a separate 128-mm battery (12.8-cm Kanonen-Batterie) was approved, which included six K 81/1 and K 81/2 each. By November 22, four such batteries were formed - 1092, 1097, 1124 and 1125th, which included only ten 128-mm guns (7 K 81/2 and 3 K 81/1). Subsequently, the number of guns in the batteries increased, but never reached the regular number.
In total, from April 1944 to January 1945, the Krupp firm in Breslau manufactured 132 Pak 80 guns, of which 80 were used for installation on the Jagdtiger, Maus and for training purposes (training self-propelled gun crews). The remaining 52 were mounted on field carriages and, under the designation K 81/1 and K 81/2, were used as anti-tank guns as part of separate artillery batteries on the western front.
anti-tank gun(abbr. PTO) - a specialized artillery gun designed to combat enemy armored vehicles by direct fire. In the vast majority of cases, it is a long-barreled gun with a high muzzle velocity and a low elevation angle. Other characteristic features of the anti-tank gun include unitary loading and a semi-automatic wedge breech, which contribute to the maximum rate of fire. When designing anti-tank guns, special attention is paid to minimizing its weight and dimensions in order to facilitate transportation and camouflage on the ground.
Anti-tank guns can also be used against unarmored targets, but with less effectiveness than howitzers or universal field guns
45 mm anti-tank gun model 1942 (M-42)
M-42 (Index GAU - 52-P-243S) - Soviet semi-automatic anti-tank gun caliber 45 mm. The full official name of the gun is 45-mm anti-tank gun mod. 1942 (M-42). It was used from 1942 until the end of World War II, but due to insufficient armor penetration, it was partially replaced in production in 1943 with a more powerful ZIS-2 gun of 57 mm caliber. The M-42 cannon was finally discontinued in 1946. During 1942-1945, the industry of the USSR produced 10,843 such guns.
45 mm anti-tank gun mod. 1942 M-42 was obtained by upgrading the 45-mm gun model 1937 at the plant number 172 in Motovilikha. The modernization consisted in lengthening the barrel, strengthening the propellant charge and a number of technological measures to simplify mass production. The armor thickness of the shield cover has been increased from 4.5 mm to 7 mm to better protect the crew from armor-piercing rifle bullets. As a result of modernization, the muzzle velocity of the projectile increased from 760 to 870 m/s.
Anti-tank gun M 42
The 45-mm anti-tank gun of the 1937 model (forty-five, GAU index - 52-P-243-PP-1) is a Soviet semi-automatic anti-tank gun of 45 mm caliber. It was used at the first stage of the Great Patriotic War, but due to insufficient armor penetration, it was replaced in 1942 by a more powerful M-42 gun of the same caliber. The cannon of the 1937 model was finally discontinued in 1943; in 1937-1943, the industry of the USSR produced 37,354 such guns.
The gun was intended to fight tanks, self-propelled guns and armored vehicles of the enemy. For its time, its armor penetration was quite adequate - normal at 500 m, it pierced 43 mm armor. This was enough to deal with armored vehicles protected by bulletproof armor. The length of the gun barrel was 46 klb. Subsequent, modernized, 45 mm caliber guns were longer.
The armor-piercing shells of some batches fired in violation of the production technology in the period up to August 1941 did not meet the specifications (in a collision with an armored steel barrier, they split in about 50% of cases), but in August 1941 the problem was solved - they were introduced into the production process technical changes (introduced localizers).
To improve armor penetration, a 45 mm sub-caliber projectile was adopted, which pierced 66 mm armor at a distance of 500 m along the normal, and 88 mm armor when fired at a distance of 100 m dagger fire. However, for a more effective destruction of armored targets, a more powerful gun was urgently needed, which was the 45-mm M-42 gun, developed and put into service in 1942.
The gun also had anti-personnel capabilities - it was supplied with a fragmentation grenade and buckshot. A fragmentation 45-mm grenade, when burst, gives 100 fragments that retain destructive power when scattered along the front by 15 m and in depth by 5-7 m. Also, smoke and armor-piercing chemical shells relied on the gun. The latter were intended to poison the crews of tanks and garrisons of bunkers, they contained 16 grams of the composition, which, as a result of a chemical reaction, turned into a potent poison - hydrocyanic acid HCN.
Insufficient armor penetration of the gun (especially in 1942, when tanks of the Pz Kpfw I and Pz Kpfw II types, along with the early lightly armored modifications of the Pz Kpfw III and Pz Kpfw IV, practically disappeared from the battlefield), together with the inexperience of the gunners, sometimes led to very heavy losses. However, in the hands of experienced and tactically skilled commanders, this weapon posed a serious threat to enemy armored vehicles. Its positive qualities were high mobility and ease of disguise. Thanks to this, 45-mm cannons of the 1937 model were used even by partisan detachments.
45 mm anti-tank gun model 1937 (53-K)
57-mm anti-tank gun model 1941 (ZiS-2) (GRAU index - 52-P-271) - Soviet anti-tank gun during the Great Patriotic War. This gun, developed under the direct supervision of V. G. Grabin, in 1940, was, at the time of the start of mass production, the most powerful anti-tank gun in the world - so powerful that in 1941 the gun did not have worthy targets, which led to the removal it from production (“due to excessive armor penetration” - quote), in favor of cheaper and more technologically advanced guns. However, with the advent of new heavily armored German Tiger tanks in 1942, the production of guns was resumed.
A tank gun was created on the basis of the ZiS-2, this gun was installed on the first Soviet serial anti-tank self-propelled artillery mounts ZiS-30. The 57-mm ZiS-2 guns fought from 1941 to 1945, later, for a long time, they were in service with the Soviet army. In the post-war period, many guns were delivered abroad and, as part of foreign armies, took part in post-war conflicts. The ZiS-2 is still in service with the armies of some states.
57 mm anti-tank gun model 1941 (ZIS-2)
76-mm divisional gun model 1942 (ZIS-3)
76-mm divisional gun model 1942 (ZiS-3, Index GAU - 52-P-354U) - 76.2 mm Soviet divisional and anti-tank gun. The chief designer is V. G. Grabin, the main production enterprise is artillery plant No. 92 in the city of Gorky. ZiS-3 became the most massive Soviet artillery gun produced during the Great Patriotic War. Thanks to its outstanding combat, operational and technological qualities, many experts recognize this weapon as one of the best weapons of the Second World War. In the post-war period, the ZiS-3 was in service with the Soviet Army for a long time, and was also actively exported to a number of countries, in some of which it is currently in service.
76-mm divisional gun model 1939 (USV)
The 76-mm cannon of the 1939 model (USV, F-22-USV, GAU index - 52-P-254F) is a Soviet divisional cannon of the Second World War period.
The gun had a modern design at the time of creation with sliding beds, suspension and metal wheels with rubber tires, borrowed from the ZIS-5 truck. It was equipped with a semi-automatic vertical wedge gate, a hydraulic recoil brake, a hydropneumatic knurler; rollback length is variable. The cradle is trough-shaped, "Bofors" type. The sight and the vertical guidance mechanism were located on different sides of the barrel. The chamber was designed for a standard sleeve mod. 1900 of the year, respectively, the gun could fire all ammunition for 76-mm divisional and regimental guns.
Probably, the USV participated in the Soviet-Finnish (Winter) War. The Finnish Artillery Museum in Hämeenlinna has this weapon on display, but it is not clear whether it was captured in the Winter War or already during World War II. In any case, by September 1, 1944, the Finnish artillery registered 9 cannons 76 K 39 (Finnish designation for captured USVs).
On June 1, 1941, the Red Army had 1,170 such guns. The gun was used as a divisional and anti-tank gun. In 1941-1942, these guns suffered significant losses, the rest continued to be used until the end of the war.
76 mm divisional gun model 1939 USV
The full official name of the gun is 100-mm field gun model 1944 (BS-3). It was actively and successfully used in the Great Patriotic War, primarily to fight the heavy tanks Pz.Kpfw.VI Ausf.E "Tiger" and Pz.Kpfw.V "Panther", including the heavier tanks Pz.Kpfw. VI Ausf. In the "King Tiger", and could also be effectively used as a body gun for firing from closed positions. After the end of the war, it was in service with the Soviet Army for a long time, served as the basis for the creation of a family of powerful anti-tank guns that are currently used in the Russian armed forces. This weapon was also sold or transferred to other states, in some of them it is still in service. In Russia, the BS-3 guns are (2011) as a coastal defense weapon in service with the 18th machine gun and artillery division stationed on the Kuril Islands, and a fairly significant number of them are in storage.
The BS-3 gun is an adaptation of the B-34 naval gun for land use, made under the guidance of the famous Soviet gunsmith designer V. G. Grabin.
BS-3 was successfully used at the final stage of the Great Patriotic War as a powerful anti-tank gun to fight enemy tanks at all distances and as a hull gun for long-range counter-battery fire, due to its high range of fire.
100 mm T12 Anti-Tank Gun
7.62 cm F.K.297(r).
In 1941-1942, the Germans captured a significant number of USV guns and assigned them the designation 7.62 cm F.K.297(r).
Most of the captured guns were converted by the Germans into field guns, with a barrel modeled on 7.62 cm Pak 36. The modernized gun was called 7.62 cm FK 39. A muzzle brake was installed on the gun, the chamber was bored out for ammunition from 7.62 cm Pak 36 The weight of the gun was, according to various sources, 1500-1610 kg. The exact number of guns converted in this way is not known, since in German statistics they were often combined with Pak 36. According to some sources, up to 300 of them were produced. The ballistic characteristics of the gun are also unknown, according to the results of tests of a captured gun in May 1943, an armor-piercing projectile fired from it pierced the 75-mm frontal armor plate of the KV tank at an angle of 60 degrees at a distance of 600 m.
By March 1944, the Germans still had 359 of these guns, of which 24 were in the East, 295 in the West, and 40 in Denmark.
Pak 36(r)
7.62cm Pak. 36 (German: 7.62 cm Panzerjägerkanone 36) - 76 mm German anti-tank gun during the Second World War. They were made by reworking (deep modernization) of captured Soviet F-22 cannons, captured in large numbers during the initial period of the invasion of the USSR.
Pak 36 was a deep modernization of the Soviet 76-mm divisional gun model 1936 (F-22). The gun had sliding beds, sprung wheels, metal wheels with rubber tires. It was equipped with a semi-automatic vertical wedge bolt, a hydraulic recoil brake, a hydropneumatic knurler and a powerful muzzle brake. The Pak 36(r) limber was not completed and moved exclusively on mechanical traction.
Most of the guns were adapted for installation on the Marder II and Marder III anti-tank self-propelled guns. Intermediate modernization options are known: when the chamber was not bored and the muzzle brake was not used. The final version of the modernization in the name lost the letter "r" in brackets, and in all German documents it was already referred to as "7.62 cm Pak. 36".
The first guns arrived at the front in April 1942. In that year, the Germans converted 358 guns, in 1943-169 and in 1944 - 33. In addition, another 894 guns were converted for installation on self-propelled guns. It is worth noting that the production statistics for towed guns most likely include 7.62 cm FK 39, of which up to 300 pieces were produced. The delivery of towed guns was carried out until the spring of 1943, guns for self-propelled guns - until January 1944, after which production was completed due to the exhaustion of the stock of captured guns.
Mass production of ammunition for this gun was launched.
Pak 36 was actively used throughout the war as an anti-tank and field gun. The intensity of their use is evidenced by the numbers of spent armor-piercing ammunition - in 1942, 49,000 pieces. armor-piercing and 8170 pcs. sub-caliber shells, in 1943 - 151390 pcs. armor-piercing projectiles. For comparison, the Pak 40 used up 42,430 units in 1942. armor-piercing and 13380 pcs. cumulative shells, in 1943 - 401100 pieces. armor-piercing and 374,000 pcs. cumulative projectiles).
The guns were used on the Eastern Front and in North Africa. By March 1945, the Wehrmacht still had 165 Pak 36 and FK 39 guns (the latter was a captured 76-mm divisional gun model 1939 (USV) converted into an anti-tank gun)
Pack 407.5cm Pack. 40 (officially fully 7.5 cm Panzerjägerkanone 40)
German 75mm anti-tank gun of World War II. The index "40" for this gun indicates the year the project was created and the start of experimental work. It is the second German gun (after 4.2 cm PaK 41) adopted under the new term: "tank hunter's gun" (German: Panzerjägerkanone) - instead of "anti-tank gun" (German: Panzerabwehkanone). In the post-war literature, the authors, when opening the abbreviation Pak. 40 use both terms.
The Pak 40 was used in the vast majority of cases as an anti-tank gun, firing at its targets with direct fire. In terms of armor-piercing action, the Pak 40 was superior to the similar Soviet 76.2 mm ZIS-3 gun, this was due to a more powerful powder charge in the Pak 40 shot - 2.7 kg (for the ZIS-3 shot - 1 kg). However, the Pak 40 had less effective recoil suppression systems, as a result of which, when fired, the coulters “burrowed” into the ground more strongly, as a result of which the ZiS-3 lost a lot in the ability to quickly change position or transfer fire.
Toward the end of the war, the production of anti-tank guns in Nazi Germany was given one of the highest priorities. As a result, the Wehrmacht began to experience a shortage of howitzers. As a result, the Pak 40 began to be used for indirect fire, modeled on the ZIS-3 divisional cannon in the Red Army. This decision had another advantage - in the event of a deep breakthrough and the tanks reaching the positions of German artillery, the Pak 40 again became an anti-tank gun. However, estimates of the scale of the combat use of the Pak 40 in this capacity are very controversial.
At the beginning of 1945, two anti-tank self-propelled guns were built in Sibenik for the People's Liberation Army of Yugoslavia on the chassis of the Stuart tank, on which captured German 75-mm Pak 40 anti-tank guns were installed
At the end of World War II, the plentiful Pak. 40 were put into service in France, where the production of ammunition for them was established.
In the period after 1959, several anti-tank artillery battalions were created as part of the Vietnamese People's Army, armed with German 75-mm Pak 40 anti-tank guns supplied from the USSR.
7.5cm Pack. 40 (7.5 cm Panzerjagerkanone 40)
Pack 35/36
3.7 cm Pak 35/36- German anti-tank gun during World War II. In the Wehrmacht, it bore the unofficial name "mallet" (German: Anklopfgerät)
The Pak 35/36 was a very modern design for its time. The gun had a light two-wheeled carriage with sliding beds, sprung wheels, metal wheels with rubber tires, a horizontal wedge quarter-automatic shutter (with an automatic closing mechanism). Hydraulic recoil brake, spring knurler
Pak 28 production began in 1928, Pak 35/36 in 1935. By September 1, 1939, the Wehrmacht had 11,200 Pak 35/36 units, and in the remaining months of 1939 another 1,229 guns were manufactured. In 1940, 2713 guns were manufactured, in 1941 - 1365, in 1942 - 32, and this was the end of their production. In 1939 prices, the gun cost 5730 Reichsmarks. Together with the Pak 28 and 29, 16,539 guns were produced, including 5,339 in 1939-1942.
On the basis of the Pak 35/36, German designers developed its tank variant KwK 36 L/45, which was armed with the early models of the PzKpfw II tank.
The Pak 35/36 was certainly a successful weapon. This assessment is confirmed by the wide distribution of this weapon (and guns made on its basis) around the world. Pak 35/36 advantageously combined high initial speed, small size and weight, the ability to quickly transport, high rate of fire. The gun easily rolled across the battlefield by the forces of calculation, and was easily disguised. The disadvantages of the gun include the insufficiently strong behind-armor effect of light shells - it often took several hits that pierced the armor to disable the tank. Tanks hit by cannons could most often be repaired.
The vast majority of tanks of the 1930s were easily disabled by this gun. But with the advent of tanks with anti-shell armor, her fate was sealed. Sub-caliber and cumulative shells somewhat extended its life, but by 1943 this gun left the first roles. At the same time, in 1943 and later, there were targets for this gun on the battlefield - a variety of light tanks, self-propelled guns and armored personnel carriers of the countries of the anti-Hitler coalition.
3.7 cm Pack 35/36
German 50mm anti-tank gun of World War II. Abbreviation Pak. - originally from him. Panzerabwehrkanone ("anti-tank gun"), but from the spring of 1941 also from him. Panzerjägerkanone ("tank hunter's gun") - in this regard, in the documents this gun is found under both names. Index "38" corresponds to the year of construction of the first prototype.
In 1936, after receiving information about the creation in France of the Renault D-1 tank with frontal armor up to 40 mm, the Armaments Directorate (German: Heereswaffenamt) ordered Rheinmetall (Rheinmetall-Borsig AG) to develop a promising anti-tank gun capable of penetrating 40- mm armor plate from a distance of 700 m. For an experimental gun 5 cm Tankabwehrkanone in Spreizlafette (5 cm Tak.), a caliber of 5 cm was chosen, a gun carriage with sliding beds and a base plate between the wheels - in the firing position, the gun was mounted on this plate from the front (German . Schweißpilz), and the wheels were hung out. As conceived by the developers, this plate was supposed to contribute to the maneuverability of fire: ensuring circular shelling by moving only the beds. Experienced guns were ready in 1937. The barrel first had a length of 35 calibers (L / 35 = 1750 mm), later - 60 calibers (L / 60 = 2975 mm). During tests, the armor-piercing effect was found to be insufficient, and the decision with the base plate was found to be erroneous: the guns turned out to be unstable when firing. Rheinmetall continued to work: the base plate was removed, the sliding beds in the extended position began to turn off the suspension of the wheel travel, the shield cover was made double for reinforcement, the most powerful 50-mm cartridge with a long (420 mm) cartridge case from the 5 cm Pak K.u.T. (lg.L.) (in the sleeve they only replaced the electric primer sleeve with a percussion one), a muzzle brake appeared. The Pak.38 gun finally acquired its appearance in 1939.
The first 2 guns entered the troops at the beginning of 1940. The gun itself did not have time to start the French campaign. So, by July 1, 1940, the troops had only 17 guns. Large-scale production was established only by the end of the year. And by June 1, 1941, there were 1047 guns in the troops. In 1943, the gun was taken out of production as completely obsolete and unable to withstand the new tanks of the anti-Hitler coalition.
5cm Pack. 38 (5 cm Panzerabwehrkanone 38 and 5 cm Panzerjagerkanone 38)
4.2 cm PaK 41
4.2 cm Panzerjagerkanone 41 or abbr. 4.2 cm Pak 41 (German 4.2 cm anti-tank gun)- German light anti-tank gun, used by the German airborne divisions during the Second World War
The 4.2 cm Pak 41 was broadly similar to the 3.7 cm Pak anti-tank gun from which it inherited its carriage. But Pak.41 gave a higher muzzle velocity and ensured its increased armor-piercing effect. This was achieved thanks to the tapered barrel manufactured by Rheinmetall, the caliber of which varied from 42 mm at the breech to 28 mm at the muzzle. The change in caliber was made by several conical sections of various lengths, the last muzzle section is cylindrical (about 14 cm), all sections are rifled. The conical barrel also had disadvantages. So, due to the increased speeds and pressures inside the bore, the barrel resource was not large: about 500 shots even when using high-quality alloy steel. However, since the 4.2 cm Panzerjägerkanone 41 was intended mainly for arming paratrooper units, the resource was considered acceptable.
A projectile weighing 336 g pierced armor 87 mm thick from a distance of 500 m at a right angle.
4.2 cm PaK 41
12.8 cm PaK 44 (German 12.8 cm Panzerabwehrkanone 44 - 12.8 cm anti-tank gun model 1944) - a heavy anti-tank gun used by the German ground forces at the final stage of World War II. At the time of its appearance and until the end of the war, it had no analogues in terms of firing range and armor penetration, however, the excessive weight and dimensions of the gun nullified these advantages.
In 1944, a decision was made to create a super-powerful anti-tank gun with the ballistics of a 128-mm FlaK 40 anti-aircraft gun with a barrel length of 55 calibers. The new gun received the index PaK 44 L/55. Since it was not possible to install such a giant barrel on the carriage of a conventional anti-tank gun, the Meiland company, which specialized in the production of trailers, designed a special three-axle carriage for the gun with two pairs of wheels in front and one behind. At the same time, the high profile of the gun had to be maintained, which made the gun extremely visible on the ground.
However, the armor penetration of the gun turned out to be extremely high - according to some estimates, at least until 1948, there was no tank in the world that could withstand the hit of its 28-kg projectile. The first tank capable of withstanding PaK 44 fire was the experienced Soviet tank IS-7 in 1949.
According to the methodology for determining armor penetration adopted in the Axis countries, at an angle of 30 degrees, an armor-piercing-sabot projectile 12.8-cm Pz.Gr.40 / 43 from a distance of 2000 meters pierced 173 mm of armor, from 1500 meters - 187 mm, from 1000 meters - 200 mm, from 500 meters - 210 mm.
The low security and mobility of the gun, whose weight exceeded 9 tons, forced the Germans to work out the option of installing it on a self-propelled chassis. Such a machine was created in 1944 on the basis of the heavy tank "Royal Tiger" and was named "Jagdtiger". With the PaK 44 cannon, which changed its index to StuK 44, it became the most powerful anti-tank self-propelled gun of the Second World War - in particular, evidence was obtained of the defeat of Sherman tanks from a distance of more than 3500 m in the frontal projection.
Options for using guns in tanks were also worked out. In particular, the famous experimental tank "Maus" was armed with the PaK 44 in duplex with a 75-mm gun (in the tank version, the gun was called KwK 44). It was also planned to install a gun on an experienced super-heavy tank E-100.
8.8cm Pack. 43 (8.8 cm Panzerjägerkanone 43) - German 88 mm anti-tank gun of World War II. German term. Panzerjägerkanone literally means "tank hunter's cannon" and has been the standard designation for all German guns of this class since the spring of 1941; the abbreviation Pak., previously used for Panzerabwehrkanone, is retained. Index "43" corresponds to the year of construction of the first prototype.
The development of the Pak 43 was started at the end of 1942 by Krupp (Krupp A.G.). The need to create a very powerful anti-tank gun for the German ground forces was dictated by the ever-increasing armor protection of the tanks of the countries of the anti-Hitler coalition. Another incentive was the shortage of tungsten, which was then used as a material for the cores of the 75 mm Pak 40 sabot projectiles. The construction of a more powerful gun opened up the possibility of effectively hitting heavily armored targets with conventional steel armor-piercing projectiles.
The Pak 43 was based on the 88 mm Flak 41 anti-aircraft gun, which borrowed a 71 caliber barrel and its ballistics. The Pak 43 was originally designed to be mounted on a specialized cross-shaped carriage inherited from the anti-aircraft gun. But such gun carriages were in short supply and were unnecessarily complex to manufacture; therefore, in order to simplify the design and reduce the dimensions, the swinging part of Pak. 43 was mounted on a classic sliding bed carriage from a 105 mm 10 cm le K 41 (10 cm Leichte Kanone 41) light gun. This variant was designated 8.8 cm Pak 43/41. In 1943, new guns made their debut on the battlefield and their production continued until the end of the war. Due to the complex production technology and high cost, only 3,502 of these guns were produced.
Variants of the Pak 43 were used for self-propelled artillery mounts (SPGs), the KwK 43 tank gun was developed. "(8.8 cm Pak. 43/2, early designation Stu.K. 43/1) and "Jagdpanther" (8.8 cm Pak. 43/3, early designation Stu.K. 43), heavy tank PzKpfw VI Ausf B "Tiger II" or "King Tiger" (8.8 cm Kw.K. 43).
Despite the official documented designation as "8.8 cm Panzerjägerkanone 43", the broader generic term "Panzerabwehrkanone" is often used in post-war literature.
Pak 43 anti-tank gun in 1943-1945 was a very effective tool against any Allied tank that fought. Reliable protection against its fire was realized only in the Soviet heavy tank IS-3, which did not take part in hostilities in World War II. The previous model of the Soviet heavy tank IS-2 of the 1944 model was the best Pak 43 among the combat vehicles in terms of resistance to fire. In general statistics on the irretrievable losses of the IS-2, defeats from 88-mm guns make up about 80% of cases. Any other tank of the USSR, USA or Great Britain did not provide its crew with at least some protection against Pak 43 shells.
On the other hand, the Pak 43 gun was excessively heavy: its mass was 4400 kg in firing position. To transport the Pak 43, a fairly powerful specialized tractor was required. The patency of the tractor hitch with a tool on soft soils was unsatisfactory. The tractor and the gun towed by it were vulnerable on the march and when deployed in a combat position. In addition, in the event of an enemy flank attack, it was difficult to turn the barrel of the Pak 43/41 in a threatened direction.
Mobile 88mm PaK 43 Tank Killer
88 mm FlaK 41 anti-aircraft gun
8.8 cm FlaK 41- German 88 mm anti-aircraft gun. In 1939, a competition was announced for the creation of a new anti-aircraft gun with improved ballistic characteristics. The first sample appeared in 1941. During the Second World War, the Flak 41 gun was produced in small quantities, entered the troops in small batches, and was used as an anti-aircraft gun.
In 1939, the Rheinmetall-Borsig company received a contract to create a new gun with improved ballistic characteristics. At first, the gun was called Gerät 37 ("device 37"). This designation was changed in 1941 to 8.8 cm Flak 41 when the first prototype gun was made. The first serial samples (44 pieces) were sent to the African Corps in August 1942, and half of them were sunk in the Mediterranean along with German transport. Tests of the remaining samples revealed a number of complex design flaws.
Only since 1943 did these guns begin to enter the Reich air defense forces.
The new gun had a rate of fire of 22-25 rounds per minute, and the initial velocity of the fragmentation projectile reached 1000 m/s. The gun had an articulated carriage with four cross-shaped beds. The design of the carriage ensured firing at an elevation angle of up to 90 degrees. In the horizontal plane, circular shelling was possible. The gun of the 1941 model had an armored shield to protect it from shrapnel and bullets. The barrel of the gun, 6.54 meters long, consisted of a casing, a pipe and a breech. The automatic shutter was equipped with a hydropneumatic rammer, which made it possible to increase the rate of fire of the gun and facilitate the work of the crew. For Flak 41 guns, the powder charge was increased to 5.5 kg (2.9 kg for Flak18), for which the cartridge case had to be increased in length (from 570 to 855 mm) and diameter (from 112.2 to 123.2 mm, along the flange). The ignition of the charge in the sleeve is electric ignition. In total, 5 types of projectiles were developed - 2 high-explosive fragmentation with various types of fuses and 3 armor-piercing. The reach of the gun in height: the ballistic ceiling is 15,000 m, the height of the actual fire is 10,500 m.
An armor-piercing projectile weighing 10 kg and an initial speed of 980 m/s at a distance of 100 meters pierced armor up to 194 mm thick, and at a distance of one kilometer - 159 mm armor, at a distance of two kilometers - about 127 mm.
A sub-caliber projectile weighing 7.5 kg and an initial speed of 1125 m / s from a distance of 100 m pierced armor 237 mm thick, from a distance of 1000 meters - 192 mm, from 2000 meters - 152 mm.
Unlike Flak 36, mechanical traction using two single-axle carts did not provide sufficient maneuverability when transporting the FlaK 41 gun, so work was underway to install the gun on the chassis of the Panther tank, but such a self-propelled anti-aircraft gun was never created.
Flak 41 was produced in small batches - until 1945, only 279 Flak 41 units were in service with the German army.
88 mm FlaK 41 anti-aircraft gun
88 mm FlaK 18/36/37 anti-aircraft gun
8.8 cm FlaK 18/36/37, also known as "eight-eight" (German: Acht-acht) - German 88-mm anti-aircraft gun, which was in service from 1932 to 1945. One of the best anti-aircraft guns of World War II. It also served as a model for the creation of guns for the Tiger PzKpfw VI tanks. These guns were widely used as anti-tank and even field guns. Often these guns are called the most famous guns of the Second World War.
According to the Treaty of Versailles, Germany was forbidden to have in service and develop anti-aircraft artillery. But already in the 1920s, German engineers from the Krupp concern again began to develop such guns. In order to overcome the limitations of the Treaty of Versailles, all work on the manufacture of samples was carried out at the Swedish Bofors factories, with which Krupp had bilateral agreements.
By 1928, prototypes of anti-aircraft guns of 75 mm caliber with barrels of 52-55 calibers and 88 mm with a barrel of 56 calibers were ready. In 1930, anticipating the development of high-altitude bomber aircraft, German generals and designers decided to increase the caliber of the 75-mm m / 29 anti-aircraft gun proposed by them, jointly developed by Bofors and Krupp. A unitary shot of 105-mm caliber seemed too heavy for field conditions - the loader could not provide a high rate of fire. Therefore, we settled on an intermediate caliber of 88 mm. Since 1932, mass production of guns began at the Krupp plant in Essen. This is how the famous Acht-acht (8-8) appeared - from the German Acht-Komma-Acht Zentimeter - 8.8 centimeters - 88 mm Flak 18 anti-aircraft gun.
Its deliveries to the anti-aircraft units of the Wehrmacht, formed on the basis of seven motorized anti-aircraft batteries of the Reichswehr, began in 1933 under the designation "8.8 cm anti-aircraft gun 18". The indication "18" in the name of the gun alluded to 1918, and was made for the purpose of disinformation: in order to show that Germany adhered to the terms of the Treaty of Versailles, which prohibited the development of anti-aircraft guns
For firing, cartridge-loading shots with shells for various purposes were used. Fragmentation shells with a remote fuse were used against aircraft. The initial speed of such a projectile was 820 m / s, with a projectile weight of 9 kg, the explosive charge was 0.87 kg. The reach in height with this projectile reached 10600 m.
After the war, armor-piercing and HEAT rounds for the 88mm cannon were developed in Spain.
In 1941, the basis of the German anti-tank artillery was the 37-mm Pak 35/36 anti-tank gun. Only at the end of 1940, 50-mm Pak 38 anti-tank guns began to enter the troops, but on June 1, 1941 there were only 1047 of them. And the Wehrmacht received the first 15 75-mm Pak 40 anti-tank guns only in February 1942.
A similar picture was in the tank troops. The basis of the tank divisions were tanks: T-III modifications A-F, which were armed with a short-barreled 37-mm gun KwK 36; T-IV modifications A-F, with a short-barreled 75-mm gun KwK 37; and Czech-made PzKpfw 38 (t) tanks with a 37 mm KwK 38 (t) gun. New T-III tanks with a short-barreled 50-mm KwK 38 gun appeared in 1941, but as of February there were only 600 of them. Tanks T-III and T-IV with long-barreled guns 50 mm KwK 39 and 75 mm KwK 40 began to enter the troops only in the spring of 1942.
Therefore, when in 1941 the Germans met with Soviet tanks KV-1, KV-2 and T-34-76, the Wehrmacht was in a panic. The main anti-tank and tank gun of 37 mm caliber could hit T-34 tanks at a distance of only 300 meters, and KV tanks only from 100 meters. So, in one of the reports it was said that the calculation of the 37-mm gun achieved 23 hits in the same T-34 tank, and only when the projectile hit the base of the tower, the tank was put out of action. The new 50 mm guns could hit T-34 tanks from 1,000 meters, and KV tanks from 500 meters, but these guns were few in number.
Given the above data, it can be seen that the 88-mm anti-aircraft gun, especially in 1941-1942, was for the German troops almost the only effective means of fighting enemy tanks. She could hit all types of Soviet tanks throughout the war. Only IS-2 tanks could resist her fire, but at a distance of no less than 1500 meters.
The 88 mm gun was used on all fronts, both as an anti-aircraft gun and as an anti-tank gun. In addition, since 1941, she began to enter the anti-tank units.
Soviet artillerymen made a great contribution to the victory in the Great Patriotic War. No wonder they say that artillery is the "God of War". For many people, the symbols of the Great Patriotic War remain the legendary guns - the "forty-five", a 45-mm gun of the 1937 model, with which the Red Army entered the war, and the most massive Soviet gun during the war - the 76-mm divisional gun of the 1942 model ZIS-3 . During the war years, this weapon was produced in a huge series - more than 100 thousand units.
The legendary "forty-five"
The battlefield is shrouded in clouds of smoke, flashes of fire and the noise of explosions all around. An armada of German tanks is slowly moving towards our positions. They are opposed by only one surviving artilleryman, who personally charges and aims his forty-five at the tanks.
A similar plot can often be found in Soviet films and books, it was supposed to show the superiority of the spirit of a simple Soviet soldier who, with the help of practically "scrap metal", managed to stop the high-tech German horde. In fact, the 45 mm anti-tank gun was far from a useless weapon, especially at the initial stage of the war. With reasonable use, this tool has repeatedly demonstrated all its best qualities.
The history of the creation of this legendary gun dates back to the 30s of the last century, when the first anti-tank gun, the 37-mm gun of the 1930 model, was adopted by the Red Army. This gun was a licensed version of the German 37-mm gun 3.7-cm PaK 35/36, created by Rheinmetall engineers. In the Soviet Union, this gun was produced at plant No. 8 in Podlipki, the gun received the designation 1-K.
At the same time, almost immediately in the USSR, they thought about improving the gun. Two ways were considered: either to increase the power of the 37-mm gun by introducing new ammunition, or to switch to a new caliber - 45 mm. The second way was recognized as promising. Already at the end of 1931, the designers of plant No. 8 installed a new 45-mm barrel in the casing of the 37-mm anti-tank gun of the 1930 model, while slightly strengthening the gun carriage. So the 45-mm anti-tank gun of the 1932 model was born, its factory index was 19K.
As the main ammunition for the new gun, it was decided to use a unitary shot from a 47-mm French cannon, the projectile of which, more precisely, not even the projectile itself, but its obturating belt, was simply turned from 47 mm to 46 mm in diameter. At the time of its creation, this anti-tank gun was the most powerful in the world. But even despite this, the GAU demanded a modernization - in order to reduce the weight of the gun and bring armor penetration to 45-55 mm at ranges of 1000-1300 meters. On November 7, 1936, it was also decided to transfer 45-mm anti-tank guns from wooden wheels to metal wheels filled with sponge rubber from the GAZ-A car.
By the beginning of 1937, the 45-mm cannon of the 1932 model was fitted with new wheels and the gun went into production. In addition, an improved sight, new semi-automatic, push-button trigger, more reliable shield attachment, suspension, better balancing of the oscillating part appeared on the gun - all these innovations made the 45-mm anti-tank gun of the 1937 model of the year (53K) meet all the requirements of the time.
By the beginning of the Great Patriotic War, it was this gun that formed the basis of the anti-tank artillery of the Red Army. As of June 22, 1941, 16,621 such guns were in service. In total, during the war years, 37,354 pieces of 45-mm anti-tank guns were produced in the USSR.
The gun was intended to fight enemy armored vehicles (tanks, self-propelled guns, armored personnel carriers). For its time and at the beginning of the war, its armor penetration was quite adequate. At a distance of 500 meters, an armor-piercing projectile pierced 43-mm armor. This was enough to deal with the German tanks of those years, the armor of most of which was more bulletproof.
At the same time, already during the war in 1942, the gun was modernized and its anti-tank capabilities increased. The 45 mm anti-tank gun of the 1942 model, designated M-42, was created by upgrading its 1937 predecessor. The work was carried out at the plant number 172 in Motovilikha (Perm).
Basically, the modernization consisted in lengthening the barrel of the gun, as well as strengthening the propellant charge and a number of technical measures that were aimed at simplifying the serial production of the gun. At the same time, the thickness of the gun shield armor increased from 4.5 mm to 7 mm for better protection of the crew from armor-piercing bullets. As a result of modernization, the muzzle velocity of the projectile was raised from 760 m/s to 870 m/s. When using caliber armor-piercing shells, the armor penetration of the new gun at a distance of 500 meters increased to 61 mm.
The M-42 anti-tank gun was able to fight all medium German tanks of 1942. At the same time, during the entire first period of the Great Patriotic War, it was forty-fives that remained the basis of the anti-tank artillery of the Red Army. During the Battle of Stalingrad, these guns accounted for 43% of all guns that were in service with anti-tank regiments.
But the appearance in 1943 of new German tanks, primarily the Tiger and Panther, as well as a modernized version of the Pz Kpfw IV Ausf H, which had a frontal armor thickness of 80 mm, the Soviet anti-tank artillery was again faced with the need to build up firepower.
The problem was partially solved by re-starting production of the 57-mm ZIS-2 anti-tank gun. But despite this, and thanks to well-established production, the production of the M-42 continued. With tanks Pz Kpfw IV Ausf H and Panther, this gun could fight by firing on their side, and such fire could be counted on due to the high mobility of the gun. As a result, he was left in production and in service. A total of 10,843 such guns were manufactured from 1942 to 1945.
Divisional gun model 1942 ZIS-3
The second Soviet weapon, no less legendary than the forty-five, was the ZIS-3 divisional cannon of the 1942 model, which today can be found on many pedestals. It is worth noting that by the time the Great Patriotic War began, the Red Army was armed with both rather outdated field guns of the 1900/02, 1902/26 and 1902/30 models, as well as fairly modern guns: 76.2-mm divisional guns of the 1936 model ( F-22) and 76.2-mm divisional gun model 1939 (USV).
At the same time, work on the ZIS-3 was started even before the war. The well-known designer Vasily Gavrilovich Grabin was engaged in the design of the new gun. He began work on the gun at the end of 1940 after his 57 mm ZIS-2 anti-tank gun had successfully passed the tests. Like most anti-tank guns, it was quite compact, had a light and durable carriage, which was quite suitable for the development of a divisional gun.
At the same time, a high-tech barrel with good ballistic characteristics has already been created for the 76.2 mm F-22 and USV divisional guns. So the designers practically had only to put the existing barrel on the carriage of the ZIS-2 gun, equipping the barrel with a muzzle brake to reduce the load on the gun carriage. In parallel with the process of designing a divisional gun, issues related to the technology of its production were resolved, the production of many parts was carried out by stamping, casting, and welding. Compared to the USV gun, labor costs were reduced by 3 times, and the cost of one gun fell by more than a third.
The ZIS-3 was a weapon of a modern design at that time. The barrel of the gun is a monoblock with a breech and a muzzle brake (they absorbed about 30% of the recoil energy). A semi-automatic wedge gate was used. The descent was lever or push-button (on guns of different production series). The barrel resource for the guns of the first series reached 5000 rounds, but for most guns it did not exceed 2000 rounds.
Already in the battles of 1941, the ZIS-3 gun showed all its advantages over the F-22 and USV guns, which were heavy and inconvenient for gunners. This allowed Grabin to personally present his gun to Stalin and obtain official permission from him to launch the gun into mass production, moreover, the gun was already being produced and actively used in the army.
At the beginning of February 1942, formal tests of the gun took place, which lasted only 5 days. According to the test results, the ZIS-3 gun was put into service on February 12, 1942 with the official name "76-mm divisional gun of the 1942 model." For the first time in the world, the production of the ZIS-3 gun was carried out in-line with a sharp increase in productivity. On May 9, 1945, the Volga Plant reported to the party and the government about the production of the 100,000th 76-mm ZIS-3 gun, increasing their production during the war years by almost 20 times. BUT in total, more than 103 thousand of these guns were manufactured during the war years.
The ZIS-3 gun could use the entire range of 76-mm cannon shells available, including a variety of old Russian and imported grenades. So the steel high-explosive fragmentation grenade 53-OF-350, when the fuse was set to fragmentation action, created approximately 870 lethal fragments, the effective radius of which was 15 meters. When the fuse was set to high-explosive action at a distance of 7.5 km, a grenade could penetrate a brick wall 75 cm thick or an earth embankment 2 m thick.
The use of the 53-BR-354P sub-caliber projectile ensured penetration of 105 mm of armor at a distance of 300 meters, and at a distance of 500 meters - 90 mm. First of all, sub-caliber shells were sent to provide anti-tank units. Since the end of 1944, the cumulative projectile 53-BP-350A also appeared in the troops, which could penetrate armor up to 75-90 mm thick at an encounter angle of 45 degrees.
At the time of adoption, the 76-mm divisional gun of the 1942 model fully met all the requirements facing it: in terms of firepower, mobility, unpretentiousness in everyday operation and manufacturability. The ZIS-3 gun was a typical weapon of the Russian school of design: technologically simple, cheap, powerful, reliable, absolutely unpretentious and easy to operate.
During the war years, these guns were produced in-line using any more or less trained workforce without losing the quality of the finished samples. The guns were easily mastered and could be kept in order by the personnel of the units. For the conditions in which the Soviet Union found itself in 1941-1942, the ZIS-3 gun was almost an ideal solution, not only from the point of view of combat use, but also from the point of view of industrial production. All the years of the war, the ZIS-3 was successfully used both against tanks and against enemy infantry and fortifications, which made it so versatile and massive.
122-mm howitzer model 1938 M-30
The M-30 122-mm howitzer of the 1938 model became the most massive Soviet howitzer of the Great Patriotic War period. This gun was mass-produced from 1939 to 1955 and was, and still is, in service with some countries. This howitzer took part in almost all significant wars and local conflicts of the 20th century.
According to a number of artillery successes, the M-30 can be safely attributed to one of the best examples of Soviet cannon artillery in the middle of the last century. The presence of such a howitzer in the composition of the artillery units of the Red Army made an invaluable contribution to the victory in the war. In total, during the release of the M-30, 19,266 howitzers of this type were assembled..
The howitzer was developed in 1938 by the Motovilikha Plants Design Bureau (Perm), the project was led by Fedor Fedorovich Petrov. Serial production of howitzers began in 1939 at three plants at once, including Motovilikhinskiye Zavody (Perm) and at the Uralmash artillery plant (Sverdlovsk, since 1942, artillery plant No. 9 with OKB-9). The howitzer was in mass production until 1955, which most clearly characterizes the success of the project.
In general, the M-30 howitzer had a classic design: a reliable, durable two-bed carriage, a rigidly fixed shield with a raised central sheet, and a 23-caliber barrel that did not have a muzzle brake. The M-30 howitzer was equipped with the same carriage as the 152 mm D-1 howitzer. Large-diameter wheels received solid slopes, they were filled with sponge rubber. At the same time, the M-30 modification, which was produced in Bulgaria after the war, had wheels of a different design. Each 122nd howitzer had two different types of coulters - for hard and soft soil.
The 122 mm M-30 howitzer was, of course, a very successful weapon. A group of its creators, led by F.F. Petrov, managed to very harmoniously combine simplicity and reliability in one model of artillery weapons. The howitzer was very easily mastered by personnel, which was largely characteristic of howitzers of the First World War era, but at the same time it had a large number of new design solutions that made it possible to increase the fire capabilities and mobility of the howitzer. As a result, the Soviet divisional artillery received a powerful and modern howitzer, which was able to operate as part of the highly mobile tank and mechanized units of the Red Army. The wide distribution of this 122-mm howitzer in various armies of the world and the excellent reviews of gunners only confirm this.
The gun was appreciated even by the Germans, who at the initial stage of the war managed to capture several hundred M-30 howitzers. They adopted the gun under the index heavy howitzer 12.2 cm s.F.H.396 (r), actively using them on the Eastern and Western fronts. Starting from 1943, for this howitzer, as well as some other samples of Soviet cannon artillery of the same caliber, the Germans even launched a full-fledged mass production of shells. So in 1943 they fired 424 thousand shots, in 1944 and 1945 - 696.7 thousand and 133 thousand shots, respectively.
The main type of ammunition for the 122-mm howitzer M-30 in the Red Army was a fairly effective fragmentation projectile, which weighed 21.76 kg. The howitzer could fire these projectiles at a range of up to 11,800 meters. Theoretically, an armor-piercing cumulative projectile 53-BP-460A could be used to combat armored targets, which, at an angle of impact with armor of 90 °, pierced armor up to 160 mm thick. The aiming range of firing at a moving tank was up to 400 meters. But of course that would be an extreme case.
The M-30 was intended primarily for firing from closed positions against openly located and dug-in enemy manpower and equipment. The howitzer was also successfully used to destroy enemy field fortifications (dugouts, bunkers, trenches) and to make passages in barbed wire when it was impossible to use mortars for these purposes.
Moreover, the barrage fire of the M-30 howitzer battery with high-explosive fragmentation shells posed some threat to German armored vehicles. The fragments formed during the rupture of 122-mm shells were able to penetrate armor up to 20 mm thick, this was quite enough to destroy the sides of enemy light tanks and armored personnel carriers. For vehicles with thicker armor, fragments of howitzer shells could disable the gun, sights, and chassis elements.
HEAT shells for this howitzer appeared only in 1943. But in their absence, the gunners were instructed to fire at tanks and high-explosive fragmentation shells, having previously set the fuse to high-explosive action. Very often, with a direct hit on a tank (especially for light and medium tanks), it became fatal for an armored vehicle and its crew, up to the failure of the turret from the shoulder strap, which automatically made the tank incapacitated.
The 57-mm anti-tank gun of the 1943 model is a weapon with a very difficult fate. One of the two anti-tank guns of the USSR during the Great Patriotic War (the second was the famous "magpie"). This system appeared back in 1941, but then there were simply no worthy targets for this weapon. From the production of complex and expensive tools, it was decided to abandon. They remembered the ZiS-2 in 1943, when the enemy had heavy equipment.
57 mm anti-tank gun ZiS-2 model 1943. (northern-line.rf)
For the first time, the ZiS-2 of the 1943 model appeared at the front from the summer of 1943 on and subsequently proved to be quite good, coping with almost any German tanks. At distances of several hundred meters, the ZIS-2 pierced the 80-mm side armor of the "tigers". In total, more than 13 thousand ZiS-2s were produced during the war years.
ZiS-3
The most massive Soviet weapon of the Great Patriotic War was the ZiS-3 (76-mm divisional gun model 1942), which began to enter the army in the second half of 1942.
76 mm gun ZIS-3. (waralbum.ru)
The first mass combat use of this weapon is supposedly associated with the battles in the Stalingrad and Voronezh directions. The light and maneuverable gun was used to fight both manpower and equipment of the enemy. In total, more than 100 thousand ZiS-3s were produced - more than all other guns taken together during the war. The production of ZiS-3 was carried out at enterprises in Gorky (modern Nizhny Novgorod) and Molotov (modern Perm).
ML-20
The 152 mm howitzer-gun of the 1937 model is a unique weapon that combines the firing range of a cannon and the ability of a howitzer to fire along a hinged trajectory. During the Great Patriotic War, not a single army in the world, including the German one, had such systems. Not a single major artillery preparation could do without the ML-20, whether it was the Moscow, Stalingrad or Kursk battles.
152 mm howitzer-gun model 1937. (warbook.info)
It is noteworthy that the ML-20 became the first Soviet gun to open fire on German territory. On the evening of August 2, 1944, about 50 shells were fired from the ML-20 at German positions in East Prussia. And then a report was sent to Moscow that shells were now exploding on German territory. From the middle of the war, the ML-20 was installed on the Soviet self-propelled guns SU-152, and later on the ISU-152. In total, about 6900 ML-20 guns of various modifications were produced.
"Forty-five"
The 45-mm anti-tank gun of the 1937 model was the main anti-tank gun of the Red Army in the initial period of the war and was capable of hitting almost any German equipment. The military debut of this gun took place a little earlier - in the summer of 1938, when the "magpies" were used to destroy enemy firing points during the battles on Khasan, and a year later they caused a shock among Japanese tankers at Khalkhin Gol.
Calculation of a 45-millimeter anti-tank gun of the 1937 model. (broneboy.ru)
Since 1942, its new modification (45-mm anti-tank gun of the 1942 model) with an elongated barrel was adopted. From the middle of the war, when the enemy began to use tanks with powerful armor protection, transporters, self-propelled guns and enemy firing points became the main targets of the "forty-five". On the basis of the "forty-five", a 45-mm semi-automatic naval anti-aircraft gun 21-K was also created, which turned out to be ineffective due to the low rate of fire and the lack of special sights. Therefore, whenever possible, the 21-K was replaced with automatic guns, transferring the removed artillery to reinforce the positions of ground troops as field and anti-tank guns.
52-K
This weapon during the Great Patriotic War was very widely used both at the front and for the protection of rear facilities and large transport hubs. During the fighting, it was often used as an anti-tank. And before the start of mass production of the BS-3, it was practically the only gun capable of fighting German heavy tanks at long distances.
85 mm anti-aircraft gun model 1939. Tula, 1941. (howlingpixel.com)
The feat of senior sergeant G.A. The feature film "At Your Doorstep" is dedicated to this episode of the Battle of Moscow. K.K. Rokossovsky later recalled another example of the successful actions of Soviet anti-aircraft gunners, who defeated the German column with 85 mm guns on the Lutsk-Rovno road: “The gunners let the Nazis come closer and opened fire. A monstrous traffic jam formed on the highway from the wreckage of motorcycles and armored vehicles, the corpses of the Nazis. But the advancing enemy troops continued to move forward by inertia, and our guns received more and more new targets.
B-34
The universal 100 mm naval gun mount on Soviet ships (for example, Kirov-class cruisers) was used as long-range anti-aircraft artillery. The gun was equipped with an armor shield. Firing range 22 km; ceiling - 15 km. Each of the Kirov-class cruisers was to carry six 100 mm universal guns.
100mm B-34 naval gun. TsMVS, Moscow. (tury.ru)
Since it was impossible to track the movement of enemy aircraft with heavy guns, firing, as a rule, was carried out by curtains at a certain range. The weapon turned out to be useful for destroying ground targets. In total, 42 guns were fired before the start of World War II. Since production was concentrated in Leningrad, which was under blockade, the cruisers of the Pacific Fleet "Kalinin" and "Kaganovich" were forced to equip not 100-mm, but 85-mm guns as long-range anti-aircraft artillery.
One of the most effective stationary Soviet batteries was the 394th battery of four 100-millimeter guns, located on Cape Penai (the area of \u200b\u200bmodern Kabardinka) under the command of Lieutenant A.E. Zubkov. Initially, it was built to repel a possible attack from the sea, but since 1942 it has successfully operated on ground targets. In total, during the fighting, the battery conducted 691 firings, firing more than 12 thousand shells.
The battery was subjected to massive enemy artillery and air strikes. The crews suffered serious losses, and the guns were constantly damaged; gun barrels and armored shields were repeatedly replaced. A unique case was when a German shell hit directly into the gun barrel through the muzzle, but, fortunately, did not explode (this episode was independently confirmed after the war by the battery commander and mechanic). In 1975, a museum and memorial complex was opened on the site of the legendary battery.