Get married 

Devices for gluing glass. How to stick protective glass on your phone. Glass gluing process

Hello!
Indeed, as Felicity noted, “few people succeed the first time.” But what if this “time” is the only one? And is there a high risk of getting poorly glued glass with lakes of air under it? But you can get excellent results the first time. But this requires an understanding of the essence of the process and appropriate equipment of the workplace.
First, I will describe the essence of the process. Since all objects are plastic, when manipulating them, they are easily electrified. And while the old film peels off, the screen is rubbed with a napkin, the film is removed from the new glass, the surface of the screen and the new glass become electrified and manage to attract microparticles from the air. Microparticles fall from clothes, scalp hair... You never know where! We cannot see them with the ordinary eye. But by gluing glass or film to the screen, they begin to be clearly visible as air bubbles. And it will not be possible to remove such a bubble, because the microparticle has already “glued” into the adhesive layer of glass or film. The air would be squeezed out during ironing, but the particle would not. But it creates some kind of cavity for air.
Therefore, the main requirement is to deelectrify the working volume, remove electrical charges from yourself, from clothes, from glass, from the screen.
For this;
1. Prepare a spray bottle. A very convenient bottle (25 - 50 ml) with a pressure sprayer made of ethyl alcohol (buy at a pharmacy). Fill an empty bottle with preferably distilled water with half a drop of Ferry. Read and consider Felicity's addition. Practice spraying thin layers on any item.
2. Choose the table at which you will work. There should be no passing air flows or drafts capable of carrying dust.
3. Wipe the table surface with a damp cloth with a small amount of Ferry. This will remove static from the table surface and remove and bind any remaining dust.
4. Boil a kettle with a spout in advance and place it on the work table on an electric stove, 30 - 40 centimeters from the work area. So that it gives a stream of steam passing 40 - 50 centimeters above the table. This steam will remove static from objects in the work area. But don't overdo it. There should be no condensation in the form of rain or showers.
5. Prepare all the components on the table.
6. Wash your hands and preferably your face with soap a couple of times. When washing your hands, you pass yourself through a stream of water (and water conducts electric current), “ground” through the water supply system. And you will wash away microparticles of skin and fat from your face. This will not only give you clean hands (which is very important), but also refresh yourself before work.
7. Perform all the operations described by the author of the article and use the add-on from Felicity. In 12–17 minutes, if you carefully read the article and recommendations, you will get beautifully glued glass without air inclusions.
Tested many times by svoimirukami!

Content

The screen of any communication gadget needs protection. Even if you purchased latest model iPhone, then do not neglect the opportunity to install additional film on the display. This will extend the life of the phone and allow it to look attractive longer. Mechanical damage such as scratches and shocks will not be terrible if you know how to stick protective glass on your phone. The task is not easy, but if you follow the instructions, you can do it at home without outside help.

How to properly stick protective glass on a smartphone

For a beginner, the procedure may seem complicated, but a few training sessions will make you a real specialist. It is worth noting that there is no significant difference in whether we glue protective glass to iPhone 5, other phone models or a tablet. The procedure remains the same. For an inexperienced person, it is better to start from the back panel of the gadget and then move on to the screen.

Required materials and tools

If you just purchased a smartphone, then it is important to understand how to apply protective glass to your phone. The device display is very sensitive to mechanical damage. Just being in your pocket, the gadget will be damaged by coins, fingernails or keys. Even minimal scratches can cause bubbles to appear during application. The same goes for situations where you just want to replace your old phone protection.

For the procedure you will need:

  • alcohol wipe;
  • dry cloth;
  • special liquid for cleaning TV or computer screens;
  • tape or dust bag;
  • glass.

Step by step instructions

An important point is the preparation of the workplace. Choose a room with minimal dust. A kitchen or bathroom is best. There are too many textiles in the bedroom, which attract particles. Such a moment interferes with the correct process and can complicate the procedure. If you don't know how to stick a protective glass on your phone, follow these steps:

  1. Wash your hands with soap, then place the equipment, protective glass for iPhone 6 or other phone on a clean, smooth surface.
  2. Before starting the procedure, remove the old film from the device. To do this, slightly pull the edge at a 60 degree angle.
  3. Use an alcohol wipe or cloth with cleaner to remove dirt from your phone screen. This product is sold in hardware stores or made independently. To do this, you need to mix 5:1 water and alcohol, add a little dish gel to it.
  4. Rub the display until it shines. If there are dust particles left, we go over the surface with tape or a dust collector.
  5. We take the device out of the packaging and remove the film from it.
  6. We install the protection so that it matches the central button of the gadget and the speakers.
  7. Slide your finger down the center from top to bottom to secure the overlay.
  8. We expel the remaining air from the center to the edges using a credit card or a spatula, which is often included.

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coating. Although the tempered glass on the phone is only 0.18 mm thick, it perfectly protects the device from mechanical damage.

Is it possible to re-glue the protective glass on the phone?

High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, you need to carefully remove the glass and treat the adhesive side with formic alcohol. Wipe it lightly with a cloth soaked in this liquid and let it drain for a while. Then set the protection according to the speaker and button. Using light movements from the center to the edges, expel air and liquid. Small bubbles will disappear on their own within a day.

To protect the screen of your device, you need to know how to apply protective glass to your phone. It is much more durable, but at the same time flexible.

The film can only protect the display from scratches, and the protective screen also prevents the formation of cracks after the smartphone is dropped.

You should be very careful when purchasing universal glass; it may be of poor quality.

Some tips for choosing:

  • There are two types of glass: glossy and matte. The first option is cheaper, however, it can only protect the smartphone display from impacts. Before purchasing, check the strength of the glass; it should not bend too much;
  • Frosted glass is more expensive and can protect the phone from shocks, falls, and even glare. The disadvantage of such glass is that the color rendering quality of the smartphone display may deteriorate;
  • Good glass should have an oleophobic coating. It prevents the coating from getting dirty with grease;
  • It is advisable to buy glass options that include special napkins and spare protective glasses;
  • The thicker the glass, the higher its strength and level of protection for the phone during shocks and falls.

Glass gluing process

Follow the instructions to add additional protective glass to your smartphone:

  • First of all, clean your workplace. Many instructions for gluing glass are silent on this point, however, it is very important to remove all dust from the working surface. It is there even if you don't see it.
  • Take a clean rag and glass cleaner. Wipe the surface and wait until it dries. This way you will remove maximum quantity dust particles and there will be less chance that they will fall under the protective glass;
  • Turn off your smartphone during the entire procedure so that the screen does not turn on during the gluing process;
  • Take a damp cleaning cloth and wipe your phone's display thoroughly with it. You can purchase such napkins in the hardware department of any store. Wipes for cleaning glasses are also suitable.
  • Then wipe the display with a dry cloth to remove streaks and fingerprints;

  • Take a protective screen. Peel off the film on the side that will be adjacent to the smartphone display;

  • Now position the glass - without touching it, position it over the entire screen area. All steps must be done very quickly;

  • Now carefully place the glass so that it perfectly covers the surface of the phone and release it. The protective glass will stick on its own. If you have cleaned the display surface well, air and dust will not appear.

What to do if air gets in? If air bubbles still appear, go over the surface of the protective glass with a napkin, pressing lightly so that they go beyond the limits.

After gluing, turn on the smartphone and check the operation of the sensor.

Important! Many smartphone owners are wondering: is it possible to re-stick the protective glass if it comes off? Perhaps too much large number dust particles or air under the screen prevent it from securing itself. Carefully peel it off, wipe the smartphone display and repeat the sticker procedure again. Reinstalling on an already clean surface may solve the problem.

How to remove the protective glass?

Removing protective glass is much more difficult than removing film. If you glued it incorrectly, remove it using the tab located on the outside of the protective screen.

In most cases, the need to remove the protective shield occurs after a serious fall. When the screen is broken, the glass must be removed as carefully as possible.

The easiest way to take plastic card(for example, a regular bank card) and pry off the edge. Then run the card under the entire surface of the screen, detaching it from the device.

Advice! To make the peeling process easier, stick the phone screen in your palms.

Properties

Description

From us you can buy a machine for gluing film on a Remax device up to 12", box at a price of 680 rubles with the possibility of ordering installation and repair services. You can pay for the purchase of a machine for gluing film on Remax devices up to 12", box in cash or electronic money , by bank card, by bank account, cash on delivery or by bank transfer. It is possible to deliver the goods using our courier services in Moscow, using a courier company or by Russian Post. In addition, a pick-up point in Moscow is at your service.

1) Delivery by courier in Moscow.Carried out by our online store’s own couriers. To use delivery you need to select this method receiving your order when making a purchase. Delivery is usually carried out on the next business day after placing the order (if a courier is available, delivery can be carried out on the same day).

The cost of delivery in Moscow (within the Moscow Ring Road) is:
319 rubles for goods total cost up to 1000 rubles;
279 rubles for goods with a total value of up to 3,000 rubles
249 rubles for goods with a total value from 3,000 to 12,000 rubles;

The cost of delivery in Moscow (outside the Moscow Ring Road) is:
350 rubles for goods with a total value of up to 1000 rubles;
300 rubles for goods with a total value of 1,000 to 12,000 rubles;

For goods costing over 12,000 rubles, delivery within Moscow is free.

2)Receipt of goods at company offices. If you have chosen this method of receiving the goods, after registration, wait for a call from the manager to confirm the availability and reservation of the goods in the warehouse. You can also reserve goods for pickup by phone.

3)Sending through a courier company. You can order delivery from any of the courier companies presented on the website. Delivery is carried out to the recipient's address or to the delivery points of courier companies.

The exact delivery time and cost depend on the choice of courier service, the weight and volume characteristics of the order and the distance to the delivery point. Delivery time and cost are calculated automatically in the shopping cart when placing an order.

4)Sending by Russian Post. Carried out according to the post office code and recipient's address. Post restante shipments are made only upon prepayment.

You can pay for your purchase in the following ways:

1) Cash upon receipt at the company office or by courier delivery.
2) Electronic money on the site - Yandex.Money, WebMoney (service operator - Yandex company), Qiwi (by wallet number after agreement with the manager).
3) By bank card on the website (service operator - Yandex company).
4) By bank account (you can pay the bill at the bank or through a client bank).
5) Cash on delivery when sending to the regions. Payment is made to the courier company or Russian Post. No prepayment required.

How to pay for an order for legal entities?

1) For non-cash payment You must issue an invoice by selecting the appropriate payment type during checkout. After issuing an invoice for the product you have chosen, it is reserved for 5 banking days, including the day the invoice is issued. The goods are shipped only after receipt of 100% advance payment for the order to the company's bank account. Upon shipment, we will provide you with the entire set of documents (please note, we work without VAT).

2) Pay for your order in cash(purchase is made to the organization) . Please note that in this case you must have a power of attorney to receive goods from Tekhnomir LLC, or a seal of the organization. When making a purchase you will be given complete set shipping accounting documents(please note we work without VAT).

Product warranty

We strive to resolve any problem with a product purchased in our store as quickly as possible.

In the event of a defect in any purchased product, we undertake to exchange it or return the full price paid for it during the entire warranty period.

Our store has the following warranty periods for products (unless these periods are indicated directly on the website of a specific product):

Matrices, screens, covers assembled with a matrix, displays, touchscreens, touchscreens assembled with a matrix, inverters, microcircuits, coolers, cables - 3 months from the date of receipt of the goods.

Batteries, power supplies, storage devices, RAM, drives- 3 months from the date of receipt.

Cables and accessories, connectors, consumables- no guarantee.

Return of goods of good quality within 14 (30**) days not counting the day of receipt (including those purchased by mistake)

Any buyer who purchased a product in our store has the right to return or exchange a product of good quality without traces of installation and use within 14 (30**) days after receiving it (for regional buyers, it is important to send the item back by carrier within 14 (30**) days after receiving it). In this case, the product will be replaced with a similar one or 100% of the amount paid for the product will be refunded. Delivery costs, as well as commission in case of cash on delivery, are additional services and warranty obligations not included! Re-sending the desired item will cost an additional fee.

**applies to products from sections " Touchscreens (sensors) for tablets and smartphones" And " Matrix + sensor modules for tablets and smartphones" due to the need to test them before installation in the device.

To return an item you must:


Return of faulty (defective) goods in case of detection of a defect during the entire warranty period

Any customer has the right to exchange defective goods during the entire warranty period, in this case:

1) the client has the right to receive the full cost of the goods, including the cost of delivery and the amount of cash on delivery, if he wants to return the goods.

2) in case of replacement of goods, delivery of goods (both from the client and to the client) is carried out at our expense.

To exchange goods you need:
Report the shipment details to the manager (full name, shipping method, invoice number, date, etc.)
Provide a copy or original of the invoice confirming the purchase of the goods, a warranty card (or a copy).
Deliver the goods to our office (Moscow) or ensure the goods are sent to our address from Russia (the method of delivery of the returned goods is agreed upon with our manager!)
Refunds for goods are made in a way convenient for you and for us after receiving the goods in agreement with our manager.

Pay attention! The method of returning goods from Russia is agreed with our managers.