How to log into a TP-Link router? Connecting and setting up a TP-Link router. Setting up an Internet connection for a TP-Link router

Authorization

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.0.1 in the address bar, Username - admin, Password – admin(provided that the router has factory settings and its IP has not changed).

Changing the factory password

To ensure that no one but you can enter the router settings, you need to change the password to enter the settings.

To do this, select from the menu on the left System Tools(System Tools) – Password(Password) and enter the settings:

Previous username: old username, enter admin
Previous password: old password, enter admin
New username: enter a new username, you can leave admin
New Password: enter New Password
Confirm new password: confirm the new password

Setting up an Internet connection

In the router interface, you need to go to the tab Net(Network), menu WAN(Here you can add, edit and delete connections).

Setting up a PPPoE connection

Select menu on the left Net(Network), further MAC address cloning(MAC Clone)
Click Clone MAC address(Clone MAC address), then Save
In field WAN connection type(WAN Connection Type): PPPoE
Username
Password(Password) and Confirm password(Confirm Password): your password according to the agreement.
WAN connection mode(WAN Connection Mode): Connect automatically(Connect Automatically)
Save. The Internet is configured.

Setting up an L2TP connection

WAN connection type(WAN Connection Type): select L2TP/Russia L2TP
Username(User Name): your login according to the contract
Password
We put a point on Dynamic IP address(Dynamic IP address)
IP Address/Server Name(Server IP Address/Name) - server address or name (specified in the contract)
MTU size(in bytes) (MTU size) - change the value to 1450 or less
WAN connection mode(WAN connection mode) - Connect automatically(Connect Automatically)
After entering the above settings, click Save(Save). The Internet is configured.

Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)

Select menu on the left Net(Network), further MAC address cloning(MAC Clone)
Click Clone MAC address(Clone MAC address), then Save
In field WAN connection type(WAN Connection Type): PPTP
Username(User Name): your login according to the contract
Password(Password): your password according to the agreement. In some firmware, just below it asks you to confirm the password (Confirm Password)
Choose Dynamic IP address(Dynamic IP address)
In field IP Address/Server Name(Server IP Address/Name set) - enter the name or IP address of the server. Find out from your provider.
WAN connection mode(WAN connection mode) - Connect automatically(Connect Automatically)
After entering the above settings, click Save(Save). The Internet is configured.

Setting up PPtP (VPN) with a static local IP address

In field WAN connection type(WAN Connection Type): PPTP
Username(User Name): your login according to the contract
Password(Password): your password according to the agreement. In some firmware, just below it asks you to confirm the password (Confirm Password)
Choose Static IP address(Static IP address)
In the fields IP address/Server name, IP address, Max subnet, Default gateway, enter the data from the contract. In the DNS field you can enter the DNS address of your provider
WAN connection mode(WAN connection mode) - Connect automatically(Connect Automatically)
After entering the above settings, click Save(Save). The Internet is configured.

NAT when automatically obtaining an IP address (DHCP)

Select menu on the left Net(Network), further MAC address cloning(MAC Clone)
Click Clone MAC address(Clone MAC address), then Save
In field WAN connection type(WAN Connection Type): select Dynamic IP(Dynamic IP)
Click Save(Save). The Internet is configured.

Setting up Wi-Fi on the router

Setting it up WiFi connection. In the side menu, go to Wireless mode(Wireless). In the window that opens, enter the following settings:

Field Wireless network name(SSID): enter the name of the wireless network
Region(Region): Russia
Channel (Chanel): Auto
Mode: 11bgn mixed
Channel width(Channel Width): Automatic
Enable wireless broadcasting And Enable SSID Broadcast- put a tick
Click the button below Save(Save)

Setting up Wi-Fi encryption. In the side menu go to Wireless Protection(Wireless Security):

Selecting the encryption type WPA-PSK/WPA2-PSK
Version- Automatically
Encryption- AES
PSK Password: enter the password for the Wi-Fi network. The password must not be less than 8 characters
Click the Save button at the bottom. After saving the settings, you will be prompted to reboot the router; ignore this requirement (red inscription below).

Saving/restoring router settings

After setting up, it is recommended to save them so that if problems arise, you can restore them. To do this you need to go to the tab System Tools(System Tools) menu Backup copy and recovery(Backup & Restore).

To save the current router settings, you must press the button Backup copy(Backup). The settings file will be saved to the specified location on your hard drive.
- To restore settings settings from a file, you must click the file selection button, specify the path to the settings file, then click the button Restore(Restore).

Port forwarding/forwarding

This function automatically redirects requests for certain services from the Internet to the appropriate host of your local network, located behind firewall router. This function should be used if you want to create a server (for example, a Web server or mail server) on the local network behind the router’s firewall. Let's go to Forwarding (Forwarding), press Add (Add New).

IP address- network address of the device to which the request will be redirected. Service Port and Internal Port- port number that needs to be opened Protocol- Select the required protocol State- On. Click Save.

Our article today is for those who are planning to purchase or have already purchased a Tp-link TL-WR841N router. We will take a step-by-step look at the entire setup of this router - connection parameters, wireless network, Wi-Fi security key, accompanying the process with photographs for clarity. Also, all the settings described here are suitable for the TL-WR841ND model. Therefore, if you follow our instructions, setting up your new router will only take you a few minutes.

This is a successful and therefore quite common router model among users, the quality of which fully justifies the price. In my opinion, this is an ideal option for organizing home networks that will cover all their needs. My copy has been working for more than three years, distributing the Internet to many devices via Wi-Fi, and during this time I do not remember interruptions in the Internet due to its fault. On this page There is my review of the Tp-link TL-WR841N and reviews of its performance.

So, the router is already in front of you, it’s time to start setting up. Here is a list of setup steps we have to go through:

Connecting the router to the computer.
Setting up Internet access.
Setting up a Wi-Fi network on the TL-WR841N.
Security key (password) of the Wi-Fi network.
Changing the administrator password.

The power cable is plugged into a suitable connector on the router and, of course, into an outlet. Next to it there is an on/off button - it also needs to be switched to the on state. They will tell you about successful activation LED indicators, lit up on the front panel.

You can connect the router to your computer for configuration in two ways. If it is located near the computer, it would be best to do this using a lan cable.

One end of it is plugged into the connector of the computer’s network card, the other into the subscriber port of the router (ports yellow color, signed as LAN).

Accordingly, the connector blue color(WAN) is intended to receive settings from the provider. We will include in it the cable coming from the transmitting equipment or your modem.

The second method is to connect your devices via Wi-Fi. It happens that it is not possible to connect to the router with a cable - be it a damaged network card, the location of these two devices remote from each other, or other reasons. Or maybe someone doesn’t have a computer at all - then you can carry out the setup process using a tablet or smartphone connected to the router via Wi-Fi.

Typically, the Tp-link TL-WR841N router comes with a disk with a pre-selected configuration for setup. IN in this case We don’t need it - our task is to learn how to configure the router through its management interface.

So, let’s check: your router must be connected to a computer (or other device) using any of the methods described above, and a cord coming from the provider’s equipment must be inserted into the WAN port. Now you can start setting up.

Setting up Internet access on the Tp-link TL-WR841N router

To go to the router’s management interface, you need to go to the browser on your computer (another device from which you are setting up) and type in the address field 192.168.1.1 . You will then be prompted for an admin password - default values admin/admin. In case any of the above did not work for you, here it is.

And when the settings page opens, you can immediately. This is optional - that is, you can update at any other time or not do it at all.

Ifsettings at 192.168.1.1 will not open, orthe admin password will not work, or the settings you made are unsuccessful - resetting the router to default settings will help you. Between the antenna mount and the fourth subscriber port of the router there is a recessed Reset button. With the power still on, press down on it with a pen/needle or something sharp and don't let go for about ten seconds. When all the indicators go out and light up, the router is reset, you can release the button and start the setup process again.

The first thing we need to do is to enable the router to connect to the provider’s equipment and receive from it the settings necessary for Internet access. Without this, further configuration will be pointless.

On the control page, select the menu Network — WAN. A list will appear WAN Connection Type, in it you will indicate the type of connection. You can find out from your provider's support which one you will need: Dynamic IP, Static IP, PPPoE, L2TP, or PPTP. If this is a dynamic IP, then this choice is made after saving using the button Save the router will go online.

If your provider gives you one of the options PPPoE, L2TP, PPTP or static IP, you will need to enter the necessary data - IP address, gateway and DNS addresses, username, password - it all depends on the specific type of connection. You can also obtain this information from technical support or find it in your Internet service agreement.

If you previously used some kind of high-speed connection to access the Internet, you can safely delete it. Now this function will transfer to the router, and you will no longer need to manually establish a connection.

In addition, the provider can link your end devices to account by MAC address. You can also check this with your support person. If the binding exists, you can tell the employee the MAC of your router, indicated on the sticker on its bottom panel. Another option is to clone the MAC of the network card to the router (Network menu – MAC clone) or change it on the router manually.

This setup stage ends when your router has access to the Internet. If everything worked out, save the settings with the button Save and move on to the next step. And in case this setup step was unsuccessful, we recommend the following instructions: When setting up the router, it says “No Internet access” or “Restricted”.

Setting up a wifi network and protecting it with a security key

For settings Wi-Fi networks we will need to go to the menu Wireless — Wireless Settings. Here in the line Wireless Network Name Enter the name of the network by which devices trying to connect will search for it. Below is a drop down list Region, in which you need to select your country of residence. All of the following settings on this screen can be left unchanged.

Save the settings again using Save.

To protect your network from unnecessary connections, we recommend setting a security key (password). Go to the menu Wireless — Wireless Security. Place a check mark next to the line WPA/WPA2 - Personal(Recommended). IN PSK Password enter the password that will now be requested from each device trying to access your router’s network. Also, setting up a Wi-Fi security key is described in detail in this article.

When a password has been created and assigned, save immediately by clicking Save.

Changing the administrator password

We already had a publication on how to change the standard admin password, which gives access to the management page of the Tp-link TL-WR841N router. Now, while we are still on the management page, you can immediately change this password. This function is needed to ensure that any user working through your network cannot log into the router and make any changes without your knowledge.

This is done in the menu System Tools — Password. You will be asked to enter your existing authorization data, and then a new admin username and password. You can keep the admin name unchanged, but come up with a new password and write it down somewhere inaccessible so that you don’t forget it and someone else doesn’t recognize it. These settings are also saved with the button Save.

At this point, the setup of the Tp-link TL-WR841N router can be considered complete. Now all that remains is to reboot it so that it can receive the settings from the provider. Reboot is done through the menu System Tools - Reboot, or simply turning off the power for a few seconds.

After the reboot, the wireless network is activated. To connect to it, use the network name and security key assigned earlier in the setup process. Even if you configured the router, for example, from a laptop, connecting it via a LAN cable, now you can remove the cable and connect to the network via wifi.

We sincerely hope that you did not encounter difficulties when setting up Internet access, but if this did happen, here are our publications on this topic: “No Internet access” in Windows 7 and “Connection limited” in Windows 10.

You probably have some questions or feedback about the operation of the Tp-link TL-WR841N router. Leave them in the comments.

Hi all! Nowadays, most users install Wi-Fi routers at home. Firstly, it is extremely convenient, unless you are a fan of getting tangled in wires and being tied to one place. Secondly, with the purchase of mobile gadgets, the need arises to have unlimited high-speed Internet at home. Otherwise, you will have to run to a cafe with Wi-Fi every time to download the game to your phone. And this is not serious at all, is it?

Why all this fuss around routers? Few people know how to configure a Wi-Fi router so that the connection is stable, powerful and fast. Using the TP-Link router model TL-WR841N as an example, we will tell you how to set up a tp-link router at home without calling a specialist.

A few words about the model we will be working with today. Without a doubt this is one of the best offers on the router market, which at one time was purchased for 1,200 rubles. The router is relatively inexpensive, but can provide you with full Wi-Fi connectivity throughout the entire apartment.

How to connect a router model TP-Link TL-WR841N?

So, you have become the happy owner of a router and brought it home to celebrate. Opening the box, you will see inside a lot of different pieces of paper, a disk with instructions in in electronic format, as well as the router itself, a small power supply for it, network cable for connecting to a home PC.
The question of how to configure a tp-link router does not concern us yet. First you need to connect this device, everything else comes later. Place the router close to the computer in a convenient place on a stable surface. In principle, it can be placed in the hallway, and even in the kitchen - as long as there is enough wire. Since the included network cable is usually not very long, place the transmitter near the PC or go to a computer store, where they will crimp a longer cable for you.
Connect power to the router and plug it into a power outlet. Then connect to the WAN socket (it of blue color) internet cable. Please note that there are four LAN ports. Consequently, it will be possible to connect four PCs at once via a network cable (if necessary). We connect the computer to the router using the cable that came with the kit.
To make it clear to you, let’s briefly go through all the connectors and buttons of our router (picture below):

1) This button can be used to turn the router on and off.

2) Power cord.

3) WAN connector required to connect to the Internet.

4) LAN connector, through which we connected the router to the computer.

5) Enabling the QSS option.

6) Emergency button (too bad it’s not red). Resets all router settings.

How to set up a Wi-Fi router quickly?

How to properly configure the Internet on a router?

How to set up a full Wi-Fi network on a TP-Link TL-WR841N device?

That's all! We have just set up work Wi-Fi router and saved the money needed to call a specialist. How good it is to do something, realizing that you are doing it yourself, that you have learned how to do it! If you have any questions along the way, feel free to ask them in the comments below. Good luck to everyone, until new publications!

In this article I will tell you how to configure a TP-LINK router. Specifically, we will talk about setting up the router TL-WR841ND, but since the admin panels of all routers from this company are very similar, you can configure another TP-LINK router. This will not be a mega-review of all the capabilities of the router, because... there are a lot of them. I will consider only those tabs that the average user needs to configure a router for home.

Of course, you can set up the connection using the disk that comes with the router, but unfortunately this does not always work. Therefore, I prefer to do the setup manually. Moreover, the setup takes 10-15 minutes.

So the first thing you need to do is find out your connection type and Internet connection parameters (IP address, subnet mask, login, password). Typically, this data is provided by the provider along with the connection contract. If you did not find them or lost them, then you will have to contact the provider’s technical support service to get them.

Let's say there is data. Now let's start setting up the router.

1. Connect to the router
Insert the router's power cable and connect it to the network. Press the power button on the router.

Then insert the network cable (included with the router) with one end to the network card of your computer and the other to the LAN port of the router (yellow).

2. Go to the admin panel of the router
Now that the router is physically connected to the computer and the network connection between them is configured, you need to open any browser (Internet Explorer, Opera, Firefox, Chrome) and enter the router address in the address bar (for TP-LINK, by default, this is the address 192.168.1.1).

Then a window will appear in which you need to enter your login and password to access the admin panel (by default Login: admin and Password: admin).

In general, the factory login and password are usually always indicated at the bottom of the device.

Therefore, even if you have a different router, even from a different manufacturer, then look at the sticker at the bottom of the device.

If you entered everything correctly, you will see home page admins:

On the right is a column of sections, in the center is the contents of the section and the fields where we will change the settings, on the right is a little help, but unfortunately for many it will not be very helpful because it's in English.

Don’t be intimidated by the many sections, but most of them are for experienced users and for fine-tuning the router. In order to simply force the router to connect to the Internet and then distribute the Internet via Wi-Fi and local network, 3-4 tabs are enough.

3. Set up an Internet connection
To set up the Internet on your TP-LINK router, go to the Network section (in the right column in the admin panel). Next, go to the WAN subsection

I hope you have already found out your settings for connecting to the Internet. In Ukraine (and in the CIS in general), providers most often use the following four connection methods: Dynamic IP, Static IP, PPPoE, PPTP. Select your connection type in the drop-down list (top center) and go to the corresponding tab below:

Connection type Dynamic IP
For this type of connection you do not need to enter anything. Just select it from the list. For some providers you may need to enter DNS server addresses, but in most cases this is not required.

After that, click on the Save button.

Connection type Static IP
For this type of connection, you need to enter your IP address, subnet mask, gateway address and, possibly, DNS server addresses. You can find out all these settings from your provider.

When you enter all the addresses, do not forget to click on the Save button

Connection type PPPoE
For this type of connection, you must enter a username, password, and password confirmation. Also, for the CIS, you will most likely have to put the Static IP point opposite Secondary Connection and enter the IP address and mask.

If you want the router to always be connected to the Internet (usually it’s better to set it this way if you don’t have per-megabyte traffic accounting), then you need to put a dot next to the Connect Automaticaly item

Connection type PPTP

If the provider binds to the MAC address of the network card (a unique address possessed by network equipment), which is mainly relevant for the Dynamic IP and Static IP connection types, then you need to additionally go to the MAC Clone subsection and click the Clone MAC Address button. Wherein MAC address the router will become the same as the MAC address of the network card and the provider will not detect that you have installed the router.

4. Set up a Wi-Fi network on TP-LINK
To set up a Wi-Fi network, we need 2 subsections. First, go to the Wireless section and the Wireless Settings subsection.

Here you only need to select your country from the list and enter the SSID network identifier. You need to come up with a unique identifier so that it does not accidentally coincide with the network identifier of your neighbors, otherwise failures may occur. Usually it is enough to add the apartment number to the network name (for example TPLINK33)

Let's briefly consider the remaining parameters (in most cases there is no need to change them):

Channel – select a radio channel, if devices do not connect well to the wi-fi network, you can try to specify the channel explicitly (I usually choose 6 or 11)

Mode - select a standard, if you do not have devices that can operate according to the 802.11n standard (which standard the device can operate on is usually indicated on the box or in the documentation on the wi-fi icon), then you can install bg mixed.

Channel width - width of the data transmission channel.

Max TX Rate – maximum speed transfers.

Enable Wireless Router Radio – enables or disables the module wireless communication on the router (i.e. turns wi-fi on and off)

Enable SSID Broadcast – allows you to enable or disable the visibility of a wi-fi network; if this option is disabled, then you can connect to a wi-fi network only if you know its identifier (SSID), but this network will not be found in a regular wi-fi search.

Enable WDS – this option is needed to expand the coverage of an existing Wi-Fi network.

After completing the settings, do not forget to click the Save button

5. Configure Wi-Fi network security
To configure network security settings, you need to go to the Wireless section and the Wireless Security subsection.

Here you can configure the encryption method and password. I recommend choosing the WPA2-PSK encryption method. You can leave the encryption type as Automatic. The most important thing is to come up with a more complex password (containing letters and numbers), 10-15 characters. You'll still only have to enter it once on each new device, and for those trying to guess the password for your network, a complex password will be a bigger obstacle than a simple one. (For example, install something like ERG345tr4R).

After you have set up the Wi-Fi network password, do not forget to click on Save

6. Set up a local network (if necessary)
To set up a local network on a TP-LINK router, you need to go to the Network section and the LAN subsection. Here you can set the router's IP address. From the same range of IP addresses, the router will distribute addresses to devices connected to it. You don't have to change anything in this section at all.

7. Setting up an administrator password
And finally, to ensure complete security, change the administrator password on the router (you must agree that the admin password does not look reliable). This password is used to log into the admin panel of the router.

To do this, go to the System Tools section, Password subsection. Enter the old login (admin) and password (admin), and below enter the new name (you can leave it the same) and password (but be sure to change it).

8. Reboot the router
You have probably already noticed that when you click on the Save button, the following message appears at the bottom:

This inscription says that to make changes you need to reboot the router. Click on the words click here and in the window that appears, click the reboot button. The router will reboot with the new settings.

9. Connect and work
Well, the router setup is complete. Now you need to connect to it the cable through which the provider provides Internet access. (In the blue port on the router). The yellow ports can connect up to 4 PCs or laptops.

10. Purpose of router indicators
And finally, let’s look at what the indicators on the top panel of the router show.

First indicator. – Power (power indicator) – shows whether the router is on or off.

The second indicator – System (system indicator) – in in good condition blinks; if it is just on, the route is being initialized or an error has occurred; if it is off, then a system error has occurred.

The third indicator shows the status of the Wi-Fi network. Flashes when wi-fi is on and off when it's off.

Indicators 4 to 7 – show the status of the local network connection. On – the cable is connected, but there is no network activity, Flashing – data exchange between the router and PC, Off – no connection.

The eighth indicator – Internet – shows whether the Internet connection is active. On – the Internet is connected, Flashing – a connection or data exchange is in progress, Off – the Internet cable is not connected.

The last indicator shows the status of the QSS (Quick Secure Setup) function. This function is used to quickly connect devices to the router. It is mainly used to connect TP-LINK wi-fi cards to the router.

Wireless base stations of the TP-Link series are among the most common Wi-Fi routers in Russia. For settings wireless access To access the Internet, you should follow a number of simple steps. This will ensure an uninterrupted and high-quality connection to the network. Moreover, the algorithm of actions will not differ depending on the operating system installed on the computer. The settings are similar for Windows, Linux and MacOS.

How to set up a TP-Link Wi-Fi router

After purchasing a Wi-Fi router from the TP-Link line in a store, customers become the owners of a kit that includes a number of components:

Router case.
Network cable to connect the device to a computer.
Instructions that describe how to troubleshoot any problems.
Power unit.
Documentation with technical characteristics goods.
CD with materials.

First you need to connect it to your computer. In frequent cases, the cable that comes with the router is not long. Therefore, you should place the router close to the computer. Insert one side of the cable into the connector for connecting to the Internet, the other into one of several LAN connectors of the router, which are usually allocated yellow and has a corresponding inscription next to them.

The Ethernet vendor cable connects to the WAN port marked in blue.

Router Compounds

The back panel of the device is a set of a couple of buttons and holes. Each element is best labeled in order from left to right:

The first is the OFF/ON button, which accordingly turns off the router and puts it into operation.
The next one is the power cable connector with the word “power” underneath it, to which the power supply is connected.
Next is the blue WAN connector described above.
The yellow panel shows several LAN holes.
A small button that enables QSS technology to function.
The last one is the reset button.

On the front panel of the router there are indicator lights, which also have important when monitoring the proper operation of the router.

Indicator	State	Meaning
1. Food	On Off	Indicates that the power supply is properly connected
2. WLAN (Wireless Local Area Network)	Off/Flashing	Demonstrates the state of functioning wireless technologies on data transfer. A flashing position indicates that this property is active
3. LAN (local area network) 1-4	On/off/flashing	Indicates whether additional devices are directly connected to the router. A flashing state confirms that such stationary elements are connected and are performing active work. A steady light indicates that the device is connected but not active
4. WAN (Wide Area Network)	Flashing/off	This indicator displays the functioning of the Internet. If any malfunctions are detected, the WAN will not emit light
5. WPS (Wi-Fi Protected Setup) - secure installation	Moderate flashing	Indicates that the router is in the process of enabling the secure installation feature. It will take about eighty seconds
	Included	The router started working safely using Wi-Fi functions Protected Setup. The pointer will be active for approximately five minutes
	Fast flashing	No connection was made

Getting started with the router

After connecting all the components when proper operation The device's power, WLAN and WAN indicators should light up. The presence of this fact indicates that you can start setting up the router. To enter the section on establishing the required characteristics, you should:

Configuration using the web utility

There are several ways to make final and detailed adjustments to your wireless connection. Internet method is suitable for users operating systems Windows, Mac OS, Linux, which are not able to use the included CD.

After completing the above described manipulations, the subscriber will be taken to the web utility page. One of the most effective and time-saving methods is the “quick setup”, which will be located in the panel on the left. A number of steps for its operation are very simple:

Thus, by gradually following a simple algorithm, you can prepare the router for operation in a fairly short time - 5-7 minutes.

Types of Wide Area Network connections

It is worth considering this point more carefully, since further configuration of the router may differ significantly depending on the type of WAN.

If you select a dynamically assigned IP address identifier, you will need to click the “Save” or “Save” line. This will allow you to clone MAC addresses and successfully access the network.
Using Static Internet Protocol requires the user to specify an IP address, subnet mask, gateway and DNS. This information may be obtained from the provider.
The PPPoE/PPPoE Russia option will prompt you to enter a Username and Password provided by .
The L2TP method will require a VPN Server Name and Password also provided to you by the service provider.
The PPTP/PPTP Russia connection function, similarly to L2TP, will ask you to provide the same data.

Setup using CD

When fully equipped, buyers should find a special information medium in the box with the device. It greatly simplifies setup if your computer has a CD drive and has a function for reading it.

note that this method is only suitable for Windows users, in the event that they are able to run the CD.

Something to keep in mind that in this way they will be attached to your router. For additional extensions, the utility suggests going to the “WEB settings interface” item and installing them to suit your specific needs.