Parting 

Secrets, subtleties, nuances of knots - useful tips: Fisherman to fisherman. How to tie a knot: Simple knots in pictures

How to tie knots?

The ability to tie knots can help a person out in the most different situations. That is why almost everyone, regardless of their field of activity, should know how to tie knots. There are a great many types of nodes, but we have chosen the simplest and most reliable ones for you.

How to tie knots on one and two ropes

First of all, let's get acquainted with the terminology, without which the explanations will not be entirely clear. A rope has a root end, which we hold motionless in our hands, and a running end, with which we operate, that is, thread it, wrap it, etc. In the drawings, the running ends are usually indicated with shading.

In addition, there is one important methodological recommendation on tying any knot: once you have managed to tie a knot according to the instructions given, do not stop there and repeat the operation several more times. Then do the same thing the next day and every other day.

The fact is that hand memory can only be trusted when a particular skill has been firmly established through frequent repetition. That’s why don’t stop studying until you can tie one or another knot with almost no effort. eyes closed. Well, now to the point.

Simple knot

Almost everyone probably knows how to tie a simple knot, but few know that it can be tied not only on one, but also on two ropes, thus connecting them.

The disadvantages of a simple knot include, first of all, that it is quite complex untied, but simply crawls along smooth ropes and fishing lines. Also, a rope tied with a simple knot can weaken significantly, and the bending resulting from a rope tied in this way significantly reduces its strength. However, a simple knot also has its advantages: if you need to tie a rope or ropes in a few seconds, this is the shortest way. However, you should not leave such a unit for a long time, and at the first opportunity you should replace it with another, more reliable one.

Figure eight knot

Tying a figure eight is also not too difficult, but at the same time it is much more reliable than a simple knot, much easier to untie and, no less important, weakens rope only slightly. We also note that the “figure eight” is not intended for tying two ropes - it can only be used on one, and not only as a locking knot, but also as component other various nodes.

"Bloody" knot

This type of knot is used to thicken the rope, that is, it can be tied as a stopper. You can tie a “bloody” knot with two in various ways- in the simplest version, you first need to make a loop and then walk several times the running end around the main one, after which it is necessary to tighten the knot. The second option is more complicated, but it can even be used for decorative purposes.

The undoubted advantages of the “bloody” knot include the fact that it is one of the most effective locking knots, and also the fact that, unlike a simple knot, it does not harm the rope. By the way, the origin of its name is very interesting: in tsarist times, guilty soldiers and sailors were punished using a rope with a “bloody” knot at the end.

"Baby" knot

This is a good knot for tying two ropes, which many people know about, but not everyone knows how to tie it. In order to make a “woman’s” knot, you need to wrap the running end of one rope around the same end of the other, then perform this action again, after which all that remains is to tighten the knot.

The disadvantages of the “woman’s” knot include the fact that it is prone to slipping, and is also easy to unties, so it cannot be recommended where two ropes need to be firmly and securely tied: there are other knots for this purpose, one of which we will talk about.

This knot can be called a modified "woman's" knot. It is tied in exactly the same way, only before that you need to do a couple of simple operations, tying simple knots or “figure eights” that are already known to us at the running end of each rope. Now this knot will neither slide nor unravel. Well, the origin of the name “woman’s” knot is very simple: women have been tying scarves this way for a long time.

"Reef" knot

This knot, in its execution technique, is somewhat reminiscent of a “woman’s” one, however, here the running the ends of the ropes in the second act are launched slightly differently. It would seem completely minor change, however, the “reef” knot is much more reliable than the “woman’s” knot.

However, this seemingly perfect knot also has its drawbacks. On the one hand, the “reef” knot is very tight (especially if the ropes are wet), and on the other hand, it is quite easy to untie if you pull any running end in the direction of the main one of the same rope. But here, too, the problem will be solved by simple knots or figure eights tied in advance on both ropes.

"Surgical" knot

This is the last of the simple two-rope knots we'll look at. First, the running end of one rope is carried over by the running end of the other in one direction, and then in the opposite direction. Changing the direction is very important, since otherwise you will get another modification of the “woman’s” knot, but it will still be inferior in strength to the “surgical” knot.

Let us add that the “surgical” or, as it is sometimes called, the “academic” knot is easier to perform if one of the ropes is tense. Well, as you probably already guessed, this knot owes its name to the fact that doctors often use it during operations.

This could be the end of our article, but for those who are interested in particularly strong knots (for example, for fishing), I would like to recommend the article. And again I remind you: practice, practice and more practice. If something is not clear, you can always look at pictures or even videos on how to tie knots - fortunately there are many such videos on the Internet.

IN everyday life We often face the need to pack, secure or tie something. Usually in such a situation we pick up a string and begin to enthusiastically come up with unimaginable designs from knots, twists and weaves, which are then absolutely impossible to untangle. So let's learn how to tie a few more popular knots.

Gazebo knot

This is one of the main knots with which the bow string has been attached since ancient times. It is sometimes called the king of knots for its simplicity and versatility. Used to obtain a non-tightening (!) loop at the end of a straight rope, for attaching a rope to rings or eyes, for tying ropes.

Simple bayonet

The “Simple Bayonet” knot also allows you to tie a non-tightening loop, and it is used mainly in those places that require particularly reliable fastening. For example, such units have long been used in the navy to secure mooring lines to mooring fixtures, to secure towing ropes and heavy loads, and so on.

Tautline

If you need to tie something, but subsequently be able to adjust the length of the rope, then a special knot will come to the rescue, allowing you to easily change the size of the loop. It is especially often used by tourists for setting up tents and stretching awnings.

Eight

This is a traditional knot used whenever you need to attach something to a rope. It is easy to knit, it can withstand heavy loads, and later such a knot can be quite easily untied to free the rope.

The Figure Eight knot has two options. The first is used in cases where you have one free end. It looks quite complicated, but once you figure out the sequence of actions just once, everything will work out by itself.

The second option can be used when both ends of the rope are free. This knot is so simple that you can tie it with your eyes closed, and at the same time it is completely secure.

Driver node

A truly legendary knot that has many different names and even more practical applications. This node is used in construction work, during transportation, in tourism and other cases when you need to secure something tightly and tightly.

For those readers who find it difficult to navigate the animated drawings, there are additional instructions containing static photos of each step. You can find it at this link.

What other nodes do you consider practically useful and necessary to master?

How to tie knots. 38 reliable, tested units

The knot is one of the oldest inventions of mankind. Since ancient times, a person cannot do without ropes and the ability to tie knots. But is it really so important in our time to know how to tie knots, since metal and synthetics provide us with reliable fastening of a wide variety of objects? It turns out to be important. In our life we ​​need to be able to tie knots on shoes, tie stacks of books, tie bags, tie things to the trunk of a car, pull and securely tie ropes, securely tie hooks to fishing line. But the vast majority of people have a very primitive idea of ​​how to tie knots.

In this small book you'll find 38 nodes that can be useful in a variety of situations. All these knots have been thoroughly tested, tying patterns and explanations for the patterns are provided, areas of application, existing limitations and disadvantages are indicated. If you want to learn more about knots, I advise you to refer to the wonderful book by L.K. Skryagin" Sea knots"(Moscow, Transport, 1982).

Learning knots takes time and patience. Take a thin soft rope and sit with it and a book at the table. Start studying the diagram, moving from the root end of the rope to its running end, and then tie a knot with the rope exactly according to the diagram. The running end of the rope is its loose free end, which moves when tying a knot, while the root end of the rope is either fixed motionless or remains motionless when tying a knot. In the book, the running and root ends are designated as follows:

Once you understand the pattern, tie the knot several times, choosing the tying method that is most convenient for you. After all, the same node different people tied in various ways.

Inexperienced people surprisingly easily forget how to tie a knot. Therefore, if you want to constantly use a knot, you need to tie it many times, bringing the tying process to complete automation. And then you need to periodically repeat the tying training.

Of the 38 nodes, the reader will choose the ones he needs. But everyone should know the simplest knots, for example, any reader should master the woman’s and reef (straight) knots and clearly understand the difference between them.

A few words about the names of nodes. Only some of the nodes have established names. If you look, for example, at English literature, you can find out that the same node can have various names. Often the name of the knot changes depending on the method of tying it. Therefore, some of the names adopted in the book are to some extent arbitrary, for example, the name “grinner” node is not a translation from English language, but conveys the sound of an English word.

At the end of the book you will find recommendations general. But you should always remember one recommendation. If you need to use a rope or fishing line made of an unknown material, then test the knot you want to use on it. After all, the properties of the knots change even for a rope (fishing line) with the same material, but with different thicknesses.

And let us remind you once again that only numerous training and repetitions lead to the successful use of knots.

Simple knot

This is the most famous knot, the tying scheme of which is shown in Figures 1 and 2. Once tightened on the rope, a small knot is obtained that is difficult to untie. A simple knot bends the rope greatly, so its strength is significantly reduced. If you accidentally form a simple knot on your fishing line, you should remove it and tie the line with another knot (for example, a snake knot, see p. 24).

In everyday life, a simple knot can be used as a locking knot to prevent the rope from slipping out of the hole. It is also used at the end of the thread to prevent it from slipping out of the fabric, as well as to prevent the end of the rope from unraveling.

A simple knot can very easily and quickly tie two ropes (Fig. 3), but then the knot is difficult to untie. In addition, the rope weakens at the junction. Do not use a simple knot to tie synthetic ropes and fishing lines, it creeps on them.

Eight

The pattern for tying a figure eight is quite simple (Figures 1 and 2). Unlike a simple knot, it does not weaken the rope much and is relatively easy to untie. This knot is used as a locking knot and as an element of other knots.

Bloody Knot

The name of the node has a long origin. It was tied at the end of whips, which in the past were used to punish naval sailors.

To tie a blood knot, make a loop, wrap the running end around the root end several times (Figures 1 and 2), and then tighten the knot. This creates a neat knot that thickens the rope and is used as a stop knot. The bloody node is included as a component element in a number of other nodes.

Babi knot

Almost every person knows and uses this node. Loop the running end of the right rope around the running end of the left rope (Fig. 1), then repeat this operation (Fig. 2) and finally tighten the resulting knot (Fig. 3). This is how many people tie knots.

This knot can be used on rough ropes with high friction. Since ancient times, women have tied the ends of their headscarves with this knot.

However, you need to remember that this is an unreliable knot; when the ropes are tensioned, this knot slips easily. That is why sailors treat the woman’s knot with disdain.

However, this knot can also be made durable. First tie a simple knot or figure eight at the running ends of the ropes, and then tie the ropes with a woman’s knot. Such a knot will not be untied.

Reef (straight) knot

Look at the diagram for tying this knot (Figures 1, 2, 3). At first glance, it seems that we are getting a woman's knot again. However, take a closer look at Figures 2 and 3 and you will see the difference. It would seem that such a small change allows you to get a completely different, much stronger, straight knot than a woman’s.

However, it is necessary to point out the disadvantages of the direct knot. When the tension of the tied ropes is high, especially when they are wet, it becomes very tight. A straight knot is not very reliable on synthetic ropes, and when you pull one of the running ends towards the root end, it easily unties.

If you want to be sure of the strength of a straight knot, then tie, as in the case of a woman’s knot, a simple knot or a figure eight at the running ends.

Surgical knot

The natural development of a straight knot with the aim of strengthening it is to increase the number of runs around the running ends. This results in a stronger surgical knot than a straight one. In this case, you need to monitor the direction of the drifts.

In Fig. 1, the runs are made against the direction of movement of the clock hand, when viewed from the root part of the left rope, and in Fig. 2, the runs are made clockwise, when viewed in the same direction. If we do not change the direction of the wear in Figures 1 and 2, then we will get an improved woman’s knot, which is not as strong as a surgical one.

A surgical knot is easier to tie than a straight one if the rope is under tension, since after completing those indicated in Fig. 1, the running ends do not slip, and the actions indicated in Fig. 1 can be completed. 2.

Quick-release reef knot

Essentially, this is the same reef knot (see p. 9), one of the running ends of which is folded in half. When you pull on the end of the folded running end, the knot is instantly untied. This knot is widely used in everyday life; it is often called a knot with one bow. However, we must remember that it is not very reliable.

Pay attention to the technique of doubling the running end (see pictures). Using this technique, a number of knots can be made quickly untied.

A reef knot can be used to tie a rope to an object (such as a pole). The reader can easily do this if he understands the diagrams in Figures 1 - 3.

Double reef knot

Here, unlike the previous unit, during the second series of revolutions, both running ends are folded in half (Fig. 2). The double reef also comes undone instantly when one running end is pulled (Figure 3). It is widely used for tying shoe laces, ropes, and tying bows, packages, and boxes. However, it is not always reliable, so it is better not to use it in serious situations.

weaving knot

If you want to securely tie two ropes, even if they differ in thickness, then use a weaver's knot (see pictures). This is a classic knot that can be easily untied by simply sliding the loop of the left rope along the root of the right rope. However, it slides on the fishing line, so the weaving knot cannot be used to tie the fishing line.

Water node

Fold the two ropes with the running ends facing each other and begin tying a simple knot (see p. 6). However, make not one turn, but two (see picture). After tightening it turns out very strong knot, even if the ropes have different diameters. This knot is very difficult to untie, so it is used to permanently connect ropes. Unfortunately, when tying this knot through a loop, you have to pull the short running end of one rope and the long root end of another rope, so it is inconvenient to tie long ropes with it.

This knot is widely used by fishermen to attach a leash to the main fishing line. If you want to strengthen the fastening, then increase the number of revolutions from two to four. Important Feature water knot: it practically does not weaken the fishing line and ties fishing lines of different diameters well.

Simple half bayonet

A simple half bayonet is a widely used knot. Its circuit (see pictures) is simple. By itself, this knot is fragile, but it is included as an element in many knots.

Simple bayonet

A simple bayonet consists of two identical half-bayonets (Fig. 1). Pay attention to the fact that the direction of wear in both half-bayonets is preserved (in Fig. 1, the running end is carried against the direction of the clock hand, when viewed from the root part), since then a more durable knot is obtained. It makes no sense to use more than three half-bayonets, since a larger number of half-bayonets usually does not strengthen the knot. A simple bayonet is used very often, for example, for securing cargo to the trunk of a car. If the running end of a simple bayonet is attached to the root end (Fig. 2), then such a knot will not be tightened. Then it can be used in the presence of strong traction, for example, for attaching anchors.

Cow knot

Reliable, widely used unit (Fig. 1). If you need to properly tighten the rope, then such a knot is a great way to do it. It usually holds traction well. But if you want to be completely sure of the strength of the cow knot, then add a half bayonet (Fig. 2). The cow knot is indispensable for motorists: when tying things to the trunk, this knot with a half-bayonet reliably completes the fastening process. True, a cow's knot that gets wet in the rain is not always easy to untie. To prevent this from happening, when tying a half-bayonet, fold the running end in half (Fig. 3). This knot is reliable and can be easily and quickly untied in any conditions.

Embossed knot

One of the well-known nodes. There are two ways to tie it. The first method is shown in Fig. 1.

In the second method, two loops are formed (Fig. 2), after which the right loop is brought behind the left loop and both loops are put on the object. Then the embossed knot is tightened. This is exactly how fishermen sometimes attach a float, after wetting the fishing line. It must be remembered that the rope knot is reliable only with a constant pull on the rope.

Constrictor

The constrictor is one of the most tightly tightened knots. It is quite difficult to untie. Therefore, the constrictor is often used once. The pattern for tying a constrictor is easy to understand as follows (see picture). Start tying a knot, then pass the running end on the right under the right loop and tighten the resulting knot.

The constrictor can be made into a quickly untied knot by placing a double folded running end under the loops.

Remember that after tightening the constrictor, both the running and root ends of the rope go perpendicular to the axis of the object to which the rope is attached.

Double constrictor

This knot is more complex than the described single constrictor; it tightens even more. Using a single or double constrictor, you can tie a bag very tightly, tighten a rubber hose, tighten a rolled-up carpet, or apply a tourniquet to a wounded arm.

Python knot

A reliable and durable knot, somewhat reminiscent of a constrictor. However, after it is tightened, the running and root ends are located parallel to the axis of the object being tied, while in the constrictor they are perpendicular.

The python knot can be used to tie hooks to fishing line, although for this purpose it is better to use more reliable knots (see pp. 23, 26).

Blind loop

Let a fixed (non-tightening) loop be tied at the end of the rope (see, for example, p. 20). Then with the help of this loop you can form a so-called blind loop.

Anglers use a blind loop to quickly tie a spoon. To do this, you need to insert a fixed loop into the eye of the spinner and pull its front part to the side of the spinner closest to us (Fig. 1). Then the front part needs to be lowered down (Figures 2 and 3). This loop can be easily untied in reverse order.

It is sometimes called a tag loop because it is used for tying and storing items with a hole.

Gazebo (booline) knot

The arbor knot shown in the figure is the famous classical knot, known to the Egyptians and Phoenicians as early as 3000 BC. IN English literature it is sometimes called the king of knots. The gazebo knot is easy to tie, does not damage the rope, does not slip and, if necessary, can be easily untied. Its only drawback is that it somewhat weakens the line. However, some anglers use it to tie a fixed (non-tightening) loop.

The gazebo unit is indispensable for motorists when towing or pulling a car out of a ditch. Motorists can use it to tie things to the trunk as follows. First, tie a small loop at one end of the rope using a bower knot. Then loop this loop around the trunk rod and pass the other end of the rope through it. This creates a reliable fastening of the rope to the trunk, which can then be easily untied. You should complete tying things to the trunk using a cow knot (see p. 15).

Simple loop

This is the simplest of the non-tightening loops: fold the running end of the rope in half, as shown in the figure, and tie a simple knot with it. A simple loop can also be used on synthetic rope; it is durable and does not change its size. However, she weakens the rope greatly. If you try to use it on a fishing line, the fishing line, even with a relatively low tension, will break at the knot of a simple loop. Therefore, anglers should use a fishing loop. In addition, it should be remembered that a simple loop is very difficult to untie.

Fisherman's Loop

Fold the running end of the fishing line in half and begin tying a simple knot. However, make not one turn, but two (see picture). This creates a very strong, dimensionally stable loop. This loop is very difficult to untie, so it is usually used by fishermen to tie a permanent loop at the end of the fishing line. A loop with two turns still weakens the line somewhat. If you want to avoid such weakening, then make more turns (four or five).

English loop (fisherman's fire)

An English loop can be tied either at the end or in the middle of the rope. When tightening, you need to bring the resulting nodes closer together.

This loop can be used on a fishing line, but it is not as reliable as a fishing loop and weakens the fishing line somewhat.

Simple running knot

A simple running knot creates a tight loop. To do this, make a loop and pull the root part of the rope through it (Fig. 1). The resulting loop (Fig. 2) is tightened if you pull the root part. A knot can be tied in any part of the rope. You can use it to tighten a bag or tie a rope to an object.

Untied simple running knot

A simple running knot can be turned into a quick release knot. To do this, you need to fold the running end in half and insert it into the resulting loop (Fig. 1). The resulting loop is tightened by pulling the root end of the rope. It comes undone easily by pulling the running end. This is a very common knot; it can be used to tie, for example, a boat. To prevent the knot from accidentally coming undone, insert the running end into the loop (Fig. 2). This knot creeps on the fishing line, so it cannot be used.

Grinner knot

One of the most suitable knots if you need to firmly tie a rope or fishing line to an object. The pattern for tying this knot is clear from the figure. Anglers often tie the lure to the fishing line with this knot. They can also be used to tie a hook and eye to a fishing line. With this knot you can securely tie the fishing line to the spinning reel. The Grinner knot is very difficult to untie.

Improved gripping unit

A simple, strong knot for tying a rope or fishing line to an object. The pattern for tying this knot is clear from the figure. To tie the fishing line, it is necessary, as shown in the figure, to pass the running end through a large loop, otherwise the knot will turn out to be fragile. Anglers use this knot to tie spinners and to tie fishing line to a spinning reel. The improved gripper knot is very difficult to untie. Since it practically does not weaken the fishing line, it can be used to tie an eye hook to the fishing line.

Palomar Knot

This secure knot can be used to tie eye hooks or spinners to any type of fishing line. From the picture you can see that it is easy to tie. This knot is convenient for tying fishing line to a spinning reel.

Snake knot

One of the best knots for tying fishing lines of the same diameter. The pattern for tying it is clear from Figures 1 and 2. After tightening, a symmetrical compact knot is obtained.

It can also be used to tie ropes, but you must remember that a snake knot is difficult to untie.

Do not use this knot to tie fishing lines of different diameters; such a connection is unreliable.

Albright node

A good reliable knot for tying fishing lines of different and equal diameters. When winding thin fishing line onto the folded running end of thick fishing line, make sure that the turns do not intersect and lie neatly next to each other. Albright node
difficult to untie.

Double Grinner Knot

To securely tie two lines of different or the same diameter, use a double-grinner knot. First tie the greener with the right fishing line on the left fishing line (Fig. 1), then tie the greenner with the left fishing line on the right fishing line (Fig. 2). Tighten the resulting knots and bring them closer together.

Step knot

A strong knot for tying a hook without an eye to a fishing line. However, anglers often simplify this knot by not making the first two turns around the hook shown in the figure. This option for tying a hook is also quite reliable.

Sea knot

A widely used reliable knot for tying a hook without an eye to a fishing line. You can also use it for a hook with an eye, then before tying a knot you need to pass the running end of the fishing line through the eye. This knot is widely used by fishermen at sea.

Figure 8 leash

A reliable way to attach a leash to the main line. First, form a figure eight on the main line. Then pass the leader through the figure eight and tie it to the main line and tighten the figure eight. Strictly follow the pattern shown in the figure, then the tied leash will deviate from the main fishing line.

Improved locking unit

A good stopper for stopping the float during long casts. Attach the needle to the main line and wind the stop line around the main line and the needle according to the pattern shown in the figure. Then insert the end of the stop line into the eye of the needle and pull the needle from the stop line towards the needle point. Remove the needle and pull the knot tightly over the ends of the stop line. After this, cut off the excess ends.

Noose with half bayonets

A noose with half bayonets is used to lift and move logs and other cylindrical objects. The method of tying a noose without half bayonets is shown in Fig. 1 and 2, with half bayonets - in Fig. 3. This knot is used by loggers, so it is also called a log knot.

A noose with half bayonets is a strong and reliable knot that is tightly tightened and easily untied after use. First, two half-bayonets are made, shown on the left side of the figure. 3, and then they tie a noose, which needs to be tied a little away from the middle of the log. Before moving, the slack between the half bayonets and the noose must be taken out. The location of the half-bayonets is also important; they should be on the side of the noose in which the thrust is directed. Lifting heavy objects with a noose without half bayonets is dangerous.

Eskimo loop

When stringing a bow, you need to change the size of the loop; an Eskimo loop is used for this purpose. First, a loop is tied (Fig. 1), reminiscent of a simple running knot (see p. 21). However, unlike a simple running knot, when the size of the loop changes, the running end of the rope moves, not the root end. Next, the string is pulled with the running end and the half-bayonet is tied with it (Fig. 2). The Eskimo loop can be used in a variety of situations to tighten rope.

Fishing bayonet (anchor knot)

Tying a knot to an anchor is one of the important operations in maritime affairs. The knot shown in Figures 1 and 2 has been tested by maritime practice; it is recognized by sailors as the most reliable knot for fastening the rope to the anchor.

The fisherman's bayonet (anchor knot) is very similar to a simple bayonet (see p. 14). When using it, you need to attach the running end to the root end. Then the fishing bayonet does not tighten and holds firmly even with very strong traction.

Success node

In Japan, this knot symbolizes success. Fold the rope on the table according to the pattern shown in the figure. Then begin to slowly pull the rope in the directions indicated by the arrows. Make sure that the running end, which will turn down, does not slip out of the loop. Gently help tighten the knot with both hands. The result is an original knot, forming a cross on one side and a square on the other.

  1. Many knots can be made quick-release if the running end is folded in half at the end of the knot.
  2. Many knots can be made more reliable if you tie either a simple knot or a figure eight knot at the running end, which prevents the running end from slipping out.
  3. In new conditions or when using a rope (line) made of an unfamiliar material, the knot should be thoroughly tested before use.
  4. Good knots have a neat and tidy appearance.
  5. The more revolutions a unit has, the more reliable it is.
  6. If the knot looks dubious, then it needs to be tied and cut out on the fishing line.
  7. Knots need to be tightened slowly and carefully; sharp jerks loosen the knots.
  8. The knots on the fishing line must be wetted before tightening.
  9. The ends of the knots on the fishing line should be carefully trimmed. Do not use a dull knife or fire, which will weaken the knot.
  10. Practice tying knots constantly. The results of the training will be reflected when the knot needs to be applied in a real situation.

Guys, we put our soul into the site. Thank you for that
that you are discovering this beauty. Thanks for the inspiration and goosebumps.
Join us on Facebook And VKontakte

Anything can happen in life. Let's say you need to climb to a small height, tie down a load, or pull a car out of a hole. In such cases, you cannot do without the correct tied rope, so knowing how to tie secure knots is an extremely useful skill.

website I decided to help you master 8 of the simplest and most useful knots that will be useful in any situation.

Tightening knot

How to do it. Take the edge of the rope and fold it in a “Z” shape. Make 3-4 turns around the rope with the short end and thread it into the bottom loop. Tighten the rope using the upper, working loop.

Where to apply. Such a knot is convenient to attach to various objects. For example, lifting or lowering objects with a narrow neck.

Pole tying

How to do it. First, we make a regular knot on one of the planks. Then we apply the second one to it and make 5-8 turns around. We tighten the harness with the remaining end, threading it between the poles.

Where to apply. These straps are quite strong and can be used to make one long pole, repair a fracture, or simply tie together two or more sticks.

Constrictor knot

How to do it. Make a loop in the center of the rope. Then we turn one side over so that the rope is in the shape of a figure eight. Now we take the center of this figure eight (the intersection) and simply fold the loops into a finished knot.

Where to apply. The peculiarity of this unit is that after tightening in reverse side he won't untie himself. The Constrictor is suitable for tightening bags, clamping a leaking rubber hose, tightening a rolled up carpet, you can even use it as a tourniquet.

Ladder node

How to do it. IN left hand take the end of the rope. Right hand Using a reverse grip, turn the loop over and fix the rope in your left hand. We repeat the same with the remaining rope. Then we thread the end of the rope (which dangles from below) into the loop, grab it, throwing the rest. Now the entire rope is in knots, the interval of which is equal to the size of the loop.

Where to apply. This rope can be used when descending, ascending to a height, or to pull a car out of a hole.

"Barrel" knot

How to do it. We put the object on the rope and tie it with the most ordinary knot with which we tie shoelaces. Then we stretch the knot loop onto the walls of the object and tighten it.

Where to apply. This type of knot is often used to lift heavy round objects. In addition, it is convenient for them to lift several objects at once. Or use it instead of a handle for buckets, cans, barrels.

Prusik knot

How to do it. Take the edge of a loop of thin rope and make 3-4 turns around the main rope, while passing the end through the loop. Without load, this knot glides perfectly along the rope and can be easily moved by hand. But if a load is applied to the node, it is tightened tightly and will not budge.

How to do it. Take two ropes and cross them (red over blue) to form a half knot. Cross them again (red over blue) and tighten both ends to form a straight knot.

Where to apply. One of the simplest knots for tying two ropes. Can be used if you need to temporarily tie something up when not heavy loads. When there are large loads on the connected cables and when they get wet, the straight knot is greatly tightened. But it is very easy to untie it.

This page is a collection of the most durable fishing knots for any type of tackle and equipment. Let's go! In the comments, write your reviews, tests and criticism of these knots, as well as some of your own, more reliable methods of attaching fishing line.

Knots for connecting lines

To attach two fishing lines, many connections are used, some of them are universal.

Water node, has been known for a long time, guarantees a strong connection and is easy to knit. It has been known since 1425, which indicates its versatility and professional suitability. This knot is used when connecting fishing lines and to tie the leash to the main fishing line.

Knots for fluorocarbon

Improved clinch knot, through which the hook ring is connected to the leash, the swivel is connected to the main fishing line. Most of all, it is suitable for monofilament lines up to 0.4 mm. In terms of its strength, it works at 95% and is the most popular and versatile among those used by anglers. But it is better not to use it on large winding rings or thick wire.

Knots for fluorocarbon

Fluorocarbon is used in drive units. A thin fishing line is connected to a thicker one and the knot must have high strength, but at the same time not injure the thin fishing line. Let's look at the most popular ones.

Double Loop Junction- a classic that is perfect for tying a fluorocarbon leash, for example, in a feeder rig.

Suitable for lines with a diameter difference of up to 40% while maintaining up to 90% of the load capacity. The diagram shows ropes of the same thickness, but the knot fits perfectly with different line diameters.

Double sliding knot "Grinner"(double grinner knot) is suitable for braids and monofilament lines up to 1/5 of the diameter difference.

In order to connect fishing lines with differences in diameter, and connect leader and fly line - we recommend a little complex, but very strong Albright knot. “Albright” turns out to be quite compact, easy to pass through the guide rings of the rod.

Knots for shock leader

Allows you to tie a hook into a loop in the middle of the fishing line. Often used in sea ​​fishing. It is easy to change one hook for another, or bait for bait.

Centauri Knot practically does not deform the fishing line and increases the reliability of your entire gear.