How to make glowing laces at home with your own hands? How to make glowing liquid and other tricks

Modern fashion increasingly promotes unconventional tastes and thinking. Previously, clothing with luminous elements implied belonging to a certain type of activity. For example, this type of uniform is worn by employees of transport regulation, police, and so on. Luminous elements have only recently begun to be used in ordinary clothing. People long to stand out from the crowd, especially young people, strive to be different from others. The easiest way to attract attention and show your individuality is to wear shoes with glowing laces. You can purchase them in specialized stores. Creative personalities can make them themselves.

How to make glowing laces from improvised materials will be described below.

Making glowing laces using paints

Today on store shelves you can find paints containing phosphorus and fluorescent elements. They can be purchased where LED equipment is sold, and can also be found among office supplies. How to do glowing laces using such paints? First you need to dilute the paint and soak the laces in it. But it must be remembered that what more water in solution, the less saturated the reflection of light will be. To achieve the ideal effect, paint the laces with undiluted paint and leave to dry in the sun.

A phosphorus dye will only glow in the dark if it has been exposed to light all day. All you need to do is hold the laces under a light source for a few hours, and they will glow in the dark all night long. Main feature Fluorescent paint is that it glows only in daylight or artificial light. In the dark, laces treated with this paint will not glow. The duration of the glow is affected by the quality of the paint. Expensive paints do not wash off even after numerous washes, while low-quality products may disappear from the surface after the first wash.

There are cheaper ways to make fashion laces. How to make glowing shoelaces from peroxide? It's actually very simple and effective.

Method 1

The first thing to remember when using this method is compliance with safety precautions. All exposed areas of the body and eyes should be protected with thick cloth. Dissolve three tablespoons of a 3% hydrogen peroxide solution in 300 ml of water, add salt (about a tablespoon) and a little vinegar to the solution. After this, the container should be sealed and shaken vigorously until the liquid begins to glow. Dip the laces into the resulting solution, hold them in it for a while, then dry and enjoy the result.

Method 2

There is another way to make glowing shoelaces from hydrogen peroxide. For it you will need a tall glass or flask, 5 ml of a 3% luminol solution, 10 ml of hydrogen peroxide solution, several manganese crystals and washing powder dissolved in water. First, a solution of washing powder is poured into the glass, then luminol and peroxide are added to it. Potassium permanganate must first be ground well and then mixed with the rest of the ingredients. The liquid must be mixed thoroughly. When adding water, the glow effect increases.

Method 3

Place 300 ml of water in a tall container and dissolve two tablespoons of soda in it, close with a lid and shake well. Then pour two teaspoons of peroxide into the solution, close again and mix. Dip laces (preferably cotton) into a glass and soak them in the solution for at least 10 minutes.

How to make glowing shoelaces at home using chemicals?

This method involves the use of luminol (5 ml) or phosphor (200 g). These ingredients can be purchased in specialized stores. You will also need copper sulfate (3 g), sodium hydroxide solution (15 ml), 3% peroxide solution (90 ml), 150 ml of water and a fluorescent dye. Place water in a high pot and dissolve luminol in it, then pour in peroxide and mix well. Then sodium solution is added and finally copper sulfate and paint. Mix everything well and dip the laces into the liquid. The result will be a beautiful blue glow in the dark.

LED laces

This method will require some effort, but the results will be amazing. You should purchase one silicone tube (2 m), LEDs (4 pcs.), button batteries (4 pcs.). The diameter of the silicone tube must match the size of the laces. The tube is divided into two cords of one meter each. Then liquid silicone is poured into the tube. Due to this, the light will spread evenly along the entire length. LEDs are soldered to the end of each cord. Then you should attach the batteries. For strength, they can be soldered or simply filled with glue. To avoid wasting the battery when not needed, you can make a regulator.

As a result of applying the above methods, you can create original shoes.

Luminous laces are the most popular look accessories, another invention of the Chinese. They very quickly gained popularity among young people trying to stand out among their peers and be the center of attention at every disco.

Why do you need glowing laces?

The need for luminous laces may arise:

When you have favorite sneakers that you would like to modernize and tweak a little.
If you don't like any sneaker model, but like the idea of laces.
If you are not sure about this idea and want to see how everything will look without spending extra money.
You can't find the “perfect” pair of laces, but you don't want to buy sneakers for 2 light-up strips of fabric.
If the processing and delivery of laces may take an indefinite period, but the laces are needed for tomorrow.

This is exactly the case when handmade work will cost less than a factory craft. But the money factor is not particularly important here, given that the cost of glowing laces is quite reasonable.

How to make glowing LED laces

Shimmering and glowing LED laces are a silicone cord with a built-in electronic unit and built-in LED. They are powered by regular batteries. These luminous laces operate for 70 hours on 1 battery, after which it can be replaced.

If you want to be fashionable and stand out from the crowd, do not forget that glowing laces are nothing more than an accessory. Don't rely on them to keep your shoes securely on your feet, so you won't be able to wear them over tight-fitting shoes like soccer cleats and running shoes. Glowing laces are suitable for cyclists and skaters, for visiting nightclubs, discos and romantic walks around the city.

For this purpose you will need silicone tubes and a soldering iron.

Buy silicone tubing. Their length should be the same as your laces. One meter should be enough.
Length in in this case not important since you won't be threading the laces into the tube. Pay attention to the diameter - it should match your shoes.
Fill the existing tubes with liquid silicone. This is convenient to do with a syringe, on both sides.
Everything is very simple so far, but now we need to start creating the lighting. Find ordinary LEDs - take them from a New Year's garland.
LEDs need a power source, otherwise there will be no light. What's the solution? Attach the battery. You need a tube of glue or a soldering iron.
Consider the required level of strength. A soldering iron is a more reliable option, since mechanical stress and temperature will destroy the glue much faster.

How to make glowing shoelaces impregnated with a chemical composition

The second type of luminous laces are cotton or synthetic laces. During the production process, they are impregnated with photoluminescent paint or a fluorescent base. They can be worn on any shoe, even with a tight fit on the foot. During the day they are no different from ordinary laces and only change color in the dark.

Actively promoted online simplest recipe to create glowing laces:

Take 1 teaspoon of soda.
Pour into a regular glass.
Add 1 cap of hydrogen peroxide.
This is all filled with water and the laces are placed there for 5 minutes.

According to the author, you will get excellent luminous laces. However, healthy person The question arises: why will they glow, due to what? After all, you did not add any dyes or phosphorus. The secret is simple - it's a joke. In 5 minutes you will have wet laces and that's it. The instructions are not correct, but if you correct them a little, everything will work out:

Instead of soda, add 20 g of washing powder, luminum solution and potassium permanganate.
Mix all components, except potassium permanganate, in a solution of water and hydrogen peroxide.
Grind the potassium permanganate and add to the rest of the ingredients.
This option works 100%, but be careful, there is a 100% chance you will stain half the house.

Be careful during the preparation process and wash all containers immediately after completion of work.

If your child dreams of making glowing shoelaces, don’t dissuade him. Trying to do something with his own hands will in any case benefit him, and this process will not bring harm.

Every product manufacturer strives to constantly win new customers. It is very difficult to surprise today's buyer with something new. However, shoe manufacturers decided to impress their customers with a completely new and unique creation - glowing laces. This modern and fashionable accessory will help you stand out from the night crowd.

You can purchase glowing laces in a regular store or online, or you can create such laces with your own hands. Let's talk about how to make glowing shoelaces at home.

How to make glowing shoelaces. Option one.

Before you make glowing laces at home, you need to purchase:

Silicone tube 2 meters long with a diameter suitable for laces;
LEDs of favorite colors – 4 pieces;
liquid silicone;
4 small coin batteries.

1. Making a lace.

Take the silicone tube and divide it into two equal lengths (1 m each);
Fill each section with liquid silicone (photo 1).

Photo 1 – Filling a silicone tube with liquid silicone

2. Mounting LEDs.

after the tube is filled with silicone, you need to attach an LED to each edge;
Using a soldering iron, attach each LED to the tube so that the light bulb is inside and the wires are outside (photo 2).

Photo 2 – correct position of the LED in the tube.

3. Attaching batteries.

There are two ways to secure the batteries.

Method 1.

To make your laces constantly glow, you need to solder batteries to the wires or fix the battery between the wires and fill it with glue (photo 3)

Photo 3 – applying glue to attach the battery.

Using tweezers, carefully secure the battery between the LED wires (photo 4).

Photo 4 – battery mount

Method 2.

To make the laces glow at a time convenient for you, you can make a switch that will block the contact between the wire and the battery. This option is more economical in terms of preserving the battery charge (photo 5).

Photo 5 – finished laces with a switch

This is how you can make glowing laces with your own hands. However, remember that luminous laces are only an accessory, so they cannot be used for rigid lacing, much less tied in knots (photo 6).

Photo 6 – view of luminous shoe laces

How to make glowing shoelaces. Option two.

How to make glowing shoelaces at home is very simple. You need to take regular laces and cover them with glowing paint. To do this, you will have to use luminescent (fluorescent, phosphorescent) or photoluminescent paint. This paint usually washes off after 2-3 washes. Such laces are no different in functionality from ordinary laces, so you can easily use them for their intended purpose and feel free to tie any knots (photo 7).

Photo 7 – by dipping the laces in luminous paint, you will get luminous laces

How to make glowing shoelaces. Option three.

Creating glowing laces from cold neon. The creation of such laces is based on electroluminescent wire. Using this wire you can easily create not only stunning laces, but also an original neon look for your entire shoe. Creating glowing laces doesn't take much time. To create glowing laces you will need the following materials:

neon wire;
inverter – 2 pieces;
batteries - 2-4 pieces.

Manufacturing procedure:

You need to take the neon cord and cut it into two pieces, each about 1 meter long (photo 8);

Do you want to replenish your collection of impressions without leaving your own home? For example, find out how to do glowing water, paint or laces? Then experiment with us.

A liquid that sparkles in the dark always looks fascinating. It seems that such a miracle can only be found in a scientific laboratory or in the room of an ancient alchemist. However, we know how to make glowing water at home and with pleasure we will tell you about all the nuances of this amazing process.

Before we start making water that glows, we should learn the safety rules. After all, the main thing chemical, which you will have to work with are luminol crystals. It is they that, when interacting with certain oxidizing agents, produce a glow, which is necessary. When interacting with reagents precautions should be taken.

Children conduct similar experiments in the presence of adults.
It is necessary to wear protective equipment: rubber gloves, an apron, and in some cases a gauze bandage to protect the face and respiratory organs.
When working with chemicals, they should not be inhaled, tasted or allowed to come into contact with the skin.

However, an experiment to obtain a luminous liquid does not always require enormous effort. We will teach you how to make a luminous liquid from available materials, that is virtually no chemicals.

Making sparkling liquid: the easiest way

This method, in which we will create a glowing liquid without luminol, is completely elementary. What is needed for this:

water;
3% solution of hydrogen peroxide, which is contained in every first aid kit;
table salt, which is present in every home;
vinegar.

Mix all the ingredients until you get a liquid with a glow.

DIY glowing liquid without luminol

For this method we also need the most common components.

500 ml sparkling water;
1 teaspoon of soda;
3 teaspoons of peroxide.

Mix everything for 10 minutes.

How to make holy water with the addition of luminol?

And this method already requires application chemicals. You can do it liquid that will have a blue tint. To repaint it a different color, use fluorescent dyes.

So, to create the magic liquid we will need:

2-3 grams of luminol;
80 ml peroxide;
100 ml water;
3 grams copper sulfate;
10 ml of sodium hydroxide solution;
fluorescent dyes.

Let's begin an experiment that will give us an incredible glowing liquid.

Step 1. Mix luminol and water in a glass container.

Step 2. Add hydrogen peroxide to this solution.

Step 4. And on last stage- caustic soda

If we couldn’t find all these reagents, let’s do glowing liquid based on washing powder.

Prepare 20 ml of washing powder solution in a tall glass.
Add 10 ml peroxide.
Pour 5 ml of 3% luminol solution.
Grind a few crystals of potassium permanganate and add to the container.

Be careful: the liquid tends to foam and produce sparks.

Besides these simple ways, we have a few in store for you interesting videos about how to make water with a glow.

How to make glow paint: bright magic in the dark

The next stage of our incredible experiments is paint that glows in the dark. We will make this miracle using phosphor. This miracle powder, which transforms energy into a bright glow, can be purchased at a specialty store or online.

To get 1 kg of paint that glows, you need to mix 250 grams of phosphor and 750 grams of varnish.

There are other ways to prepare magical glowing paint.

To get purple paint you will need:

calcium carbonate – 10 g;
magnesium carbonate – 0.6 g;
sulfur – 3 g;
sodium sulfate – 0.5 g;
potassium sulfate – 0.5 g;
sucrose – 0.5 g;
bismuth nitrate (0.5%) – 0.5 ml.

Mix the components and heat at high temperature– 800 degrees for 45 minutes.

If you find it difficult to obtain any of the ingredients of this experiment or you cannot remember the name of this or that reagent, we offer you a way so that you can prepare a phosphor and use it to create glowing paint.

For this method, you only need to purchase pine extract and powdered boric acid.
We dilute the pine concentrate in a small amount of water. You will get a yellowish liquid called tartazine.
Now we dilute 1/3 spoon of boron powder in water until a creamy mass is formed.
Bring the mixture to a boil, stirring and piercing the bubbles.
Cool the mass, combine it with tartazine and heat everything up.
Boil this mixture, stirring, until a bright yellow powder forms. This is a phosphor.
It can be mixed with paint or varnish, or diluted with water.

Such luminous paint, created at home, completely safe for you and your health. It can be used to treat any surface: applied to plastic, wood, and even your own body. This paint can be used in a room on the walls to make them glow in the dark or applied to any object, creating unusual compositions. This is a wonderful idea for both indoors and outdoors. Fluorescent paint will give you a festive mood and a lot of impressions.

How to make glowing laces: a fantastic look for stylish shoes

The easiest way to get glowing shoelaces at home is dip your regular shoelaces in glowing paint. You learned how to prepare it above. However, such an accessory will stop glowing after two washes. Therefore, we will tell you about another way to make luminous laces with your own hands.

You will need:

silicone tube (about 2m), with a diameter that matches the diameter of the laces;
4 LEDs different colors;
tube of liquid silicone;
4 miniature batteries.

Let's move on to the process of making the lace.

If you don’t want to waste time on all these manipulations, order yourself glowing ones from Aliexpress or any other service. We wish you bright impressions!

Every person can be fashionable while spending the smallest amount of money. In this article I would like to talk about how to do it at home: what is needed for this and how you can do everything yourself.

Why is this necessary?

First of all, I would like to say that luminous laces have been a trend for several seasons, and having such a fashionable accessory, you can always be the center of attention without any problems. However, besides this, such laces have a number of positive aspects. Made by any method, they are inherently waterproof, as well as durable and very strong. Well, as a bonus: they always attract the attention of others, and especially those of the opposite sex.

What do you need to prepare?

So, to get the desired effect of glowing laces, you need to prepare a little and stock up:

LEDs of the desired colors - 4 pieces.
A silicone pipe with a diameter similar to a cord and a length of approximately 2 meters.
Liquid silicone for filling.
Flat batteries - 4 pieces.
Soldering iron for work.

Option 1. Make a lace using a tube and silicone

So, figuring it out at home, you first need to prepare the laces themselves. This is quite easy to do. The previously purchased one must be divided exactly in half so that you get two pieces of one meter each. When this is done, the tubes themselves must be carefully filled completely with liquid silicone. Now the LEDs come into play, which need to be inserted like light bulbs along the edges into the silicone, leaving the wires outside and securing the structure with a soldering iron (the diodes will give a glowing effect, spreading light along the entire length of the silicone cord). On at this stage You also need to attach batteries to the structure so that the glow is fueled by something. This can be done in two different ways.

Method 1. The battery can be soldered between the wires. If you don’t have a soldering iron, you can simply fill it with glue so that the two wires touch it. For ease of placement and finer work, it is better to use tweezers.
Method 2. More economical in nature, because here you will only need to make a small switch that can stop powering the LED from the battery at the right time, the longer it maintains its functionality.

Option 2. Paint

There is an easier way to make glowing shoelaces at home. In addition, it is low-cost in terms of materials, money and time. To do this, you need to purchase simple laces and which are sold in regular stores. It can be called differently: luminescent, fluorescent, phosphorescent, photoluminescent. There is a special nuance here: such laces are short-lived, and the paint will wash off after two or three washes, and you will need to repeat the painting procedure again. But in support this method to create glowing laces at home, I would like to say that such products are no different from ordinary ones, and they can be tied as desired.

Option 3. Neon

It is worth saying that this is very unusual way. When figuring out how to make glowing shoelaces at home, you need to stock up on:

Neon wire (2 meters).
Batteries (about 2-4 pieces).
An inverter (preferably with a flicker control).

First you need to work with the pre-purchased cord. To do this, you need to cut it in half so that you get two identical pieces 1 meter long. Next, each piece needs to be attached to the inverter. That's all the wisdom, in essence, luminous laces from improvised means are ready! If the inverter has a flickering effect, the product will look even cooler by flashing from time to time.