Dimensionless material point and different reference systems. Material point, rigid body
The mechanical motion of a body is the change in its position in space relative to other bodies over time. He studies the movement of the bodies of a mechanic. The movement of an absolutely rigid body (which does not deform during movement and interaction), in which all its points at a given moment of time move in the same way, is called translational movement; to describe it, it is necessary and sufficient to describe the movement of one point of the body. A movement in which the trajectories of all points of the body are circles centered on one straight line and all the planes of the circles are perpendicular to this straight line is called rotational movement. A body whose shape and dimensions can be neglected under given conditions is called a material point. This is neglect
It is permissible to make a reduction when the dimensions of the body are small compared to the distance it travels or the distance of the given body to other bodies. To describe the movement of a body, you need to know its coordinates at any time. This is the main task of mechanics.
2. Relativity of motion. Reference system. Units.
To determine the coordinates of a material point, it is necessary to select a reference body and associate a coordinate system with it and set the origin of time. The coordinate system and the indication of the origin of the time reference form the reference system relative to which the motion of the body is considered. The system must move at a constant speed (or be at rest, which is generally speaking the same thing). The trajectory of the body, the distance traveled and the displacement depend on the choice of the reference system, i.e. mechanical movement is relative. The unit of length is the meter, which is the distance traveled by light in a vacuum in seconds. A second is a unit of time, equal to the periods of radiation of a cesium-133 atom.
3. Trajectory. Path and movement. Instant speed.
The trajectory of a body is a line described in space by a moving material point. Path - the length of the trajectory section from the initial to the final displacement of the material point. Radius vector - a vector connecting the origin and a point in space. Displacement is a vector connecting the initial and end point section of the trajectory traveled in time. Velocity is a physical quantity that characterizes the speed and direction of movement at a given time. Average speed is defined as. The average ground speed is equal to the ratio of the path traveled by the body in a period of time to this interval. . Instantaneous velocity (vector) is the first derivative of the radius vector of the moving point. . The instantaneous velocity is directed tangentially to the trajectory, the average velocity is directed along the secant. Instantaneous ground speed (scalar) - the first derivative of the path with respect to time, equal in magnitude to the instantaneous speed
4. Uniform rectilinear motion. Plots of dependence of kinematic quantities on time in uniform motion. Addition of speeds.
Movement with a constant modulo and direction speed is called uniform rectilinear motion. In uniform rectilinear motion, a body travels equal distances in any equal intervals of time. If the speed is constant, then the distance traveled is calculated as. The classical law of addition of velocities is formulated as follows: the speed of a material point in relation to the reference system, taken as a fixed one, is equal to the vector sum of the velocities of the point in the moving system and the speed of the moving system relative to the fixed one. 
5. Acceleration. Uniformly accelerated rectilinear motion. Graphs of dependence of kinematic quantities on time in uniformly accelerated motion.
A movement in which a body makes unequal movements in equal intervals of time is called non-uniform movement. With uneven forward movement body speed changes over time. Acceleration (vector) is a physical quantity that characterizes the rate of change of speed in absolute value and in direction. Instantaneous acceleration (vector) - the first derivative of the speed with respect to time. .Uniformly accelerated is the movement with acceleration, constant in magnitude and direction. The speed during uniformly accelerated motion is calculated as.
From here, the formula for the path with uniformly accelerated motion is derived as
The formulas derived from the equations of speed and path for uniformly accelerated motion are also valid.
6. Free fall of bodies. Acceleration of gravity.
The fall of a body is its movement in the field of gravity (???) . The fall of bodies in a vacuum is called free fall. It has been experimentally established that in free fall, bodies move in the same way, regardless of their physical characteristics. The acceleration with which bodies fall to the Earth in a vacuum is called the acceleration of free fall and is denoted
7. Uniform movement in a circle. Acceleration during uniform motion of a body in a circle (centripetal acceleration)
Any movement on a sufficiently small section of the trajectory can be approximately considered as a uniform movement along a circle. In the process of uniform motion in a circle, the value of the velocity remains constant, and the direction of the velocity vector changes.<рисунок>.. The acceleration vector when moving along a circle is directed perpendicular to the velocity vector (directed tangentially), to the center of the circle. The time interval during which the body makes a complete revolution in a circle is called a period. . The reciprocal of a period, showing the number of revolutions per unit of time, is called frequency. Applying these formulas, we can deduce that , or . Angular velocity(rotation speed) is defined as 
. The angular velocity of all points of the body is the same, and characterizes the movement of the rotating body as a whole. In this case, the linear velocity of the body is expressed as , and the acceleration - as .
The principle of independence of movements considers the movement of any point of the body as the sum of two movements - translational and rotational. 
8. Newton's first law. Inertial reference system.
The phenomenon of maintaining the speed of a body in the absence of external influences is called inertia. Newton's first law, also known as the law of inertia, says: "there are such frames of reference, relative to which progressively moving bodies keep their speed constant if no other bodies act on them." Frames of reference, relative to which bodies in the absence of external influences move in a straight line and uniformly, are called inertial frames of reference. Reference systems associated with the earth are considered inertial, provided that the rotation of the earth is neglected.
9. Mass. Strength. Newton's second law. Composition of forces. Center of gravity.
The reason for changing the speed of a body is always its interaction with other bodies. When two bodies interact, the speeds always change, i.e. accelerators are acquired. The ratio of the accelerations of two bodies is the same for any interaction. The property of a body on which its acceleration depends when interacting with other bodies is called inertia. A quantitative measure of inertia is body weight. The ratio of the masses of the interacting bodies is equal to the inverse ratio of the acceleration modules. Newton's second law relates kinematic characteristic motion - acceleration, and dynamic characteristics of interaction - forces. , or, more precisely, , i.e. the rate of change of momentum of a material point is equal to the force acting on it. With the simultaneous action of several forces on one body, the body moves with an acceleration, which is the vector sum of the accelerations that would arise under the influence of each of these forces separately. The forces acting on the body, applied to one point, are added according to the rule of addition of vectors. This provision is called the principle of independence of action of forces. The center of mass is such a point of a rigid body or a system of rigid bodies that moves in the same way as a material point with a mass equal to the sum of the masses of the entire system as a whole, which is affected by the same resultant force as the body. 
. By integrating this expression over time, one can obtain expressions for the coordinates of the center of mass. The center of gravity is the point of application of the resultant of all gravity forces acting on the particles of this body at any position in space. If the linear dimensions of the body are small compared to the size of the Earth, then the center of mass coincides with the center of gravity. The sum of the moments of all elementary gravity forces about any axis passing through the center of gravity is equal to zero.
10. Newton's third law.
In any interaction of two bodies, the ratio of the modules of the acquired accelerations is constant and equal to the inverse ratio of the masses. Because when bodies interact, the acceleration vectors have the opposite direction, we can write that 
. According to Newton's second law, the force acting on the first body is , and on the second. In this way, . Newton's third law relates the forces with which bodies act on each other. If two bodies interact with each other, then the forces arising between them are applied to different bodies, are equal in magnitude, opposite in direction, act along the same straight line, have the same nature.
11. Forces of elasticity. Hooke's law.
The force arising from the deformation of the body and directed in the direction opposite to the displacement of the particles of the body during this deformation is called the elastic force. Experiments with the rod showed that for small deformations compared to the dimensions of the body, the modulus of the elastic force is directly proportional to the modulus of the displacement vector of the free end of the rod, which in projection looks like . This relationship was established by R. Hooke, his law is formulated as follows: the elastic force arising from the deformation of the body is proportional to the elongation of the body in the direction opposite to the direction of movement of the particles of the body during deformation. Coefficient k called the rigidity of the body, and depends on the shape and material of the body. It is expressed in newtons per metre. The elastic forces are due to electromagnetic interactions.
12. Forces of friction, coefficient of sliding friction. Viscous friction (???)
The force that arises at the boundary of the interaction of bodies in the absence of relative motion of the bodies is called the static friction force. The static friction force is equal in absolute value to the external force directed tangentially to the contact surface of the bodies and opposite to it in direction. When one body moves uniformly over the surface of another, under the influence of an external force, a force equal in absolute value acts on the body driving force and opposite in direction. This force is called the sliding friction force. The sliding friction force vector is directed against the velocity vector, so this force always leads to a decrease in the relative velocity of the body. Friction forces, as well as the elastic force, are of an electromagnetic nature, and arise due to the interaction between electric charges atoms of contacting bodies. It has been experimentally established that the maximum value of the static friction force modulus is proportional to the pressure force. Also, the maximum value of the static friction force and the sliding friction force are approximately equal, as are the coefficients of proportionality between the friction forces and the pressure of the body on the surface.
13. Gravitational forces. The law of universal gravitation. The force of gravity. Body weight.
From the fact that bodies, regardless of their mass, fall with the same acceleration, it follows that the force acting on them is proportional to the mass of the body. This force of attraction acting on all bodies from the side of the Earth is called gravity. The force of gravity acts at any distance between bodies. All bodies are attracted to each other, the force of gravity is directly proportional to the product of the masses and inversely proportional to the square of the distance between them. The vectors of forces of universal gravitation are directed along a straight line connecting the centers of mass of bodies. , G – Gravitational constant, equal to . The weight of the body is the force with which the body, due to gravity, acts on the support or stretches the suspension. The weight of the body is equal in absolute value and opposite in direction to the elastic force of the support according to Newton's third law. According to Newton's second law, if no other force acts on the body, then the force of gravity of the body is balanced by the force of elasticity. As a result, the weight of a body on a fixed or uniformly moving horizontal support is equal to the force of gravity. If the support moves with acceleration, then according to Newton's second law 
, from which is derived. This means that the weight of a body whose direction of acceleration coincides with the direction of free fall acceleration is less than the weight of a body at rest.
14. Movement of a body under the action of gravity along the vertical. Movement of artificial satellites. Weightlessness. First cosmic speed.
When throwing a body parallel to the earth's surface, the greater the initial speed, the greater the flight range will be. At high speeds, it is also necessary to take into account the sphericity of the earth, which is reflected in the change in the direction of the gravity vector. At a certain value of speed, the body can move around the Earth under the influence of the universal gravitational force. This speed, called the first cosmic speed, can be determined from the equation of motion of a body in a circle. On the other hand, from Newton's second law and the law of universal gravitation it follows that. Thus, at a distance R from the center celestial body weight M the first cosmic velocity is equal to. When the speed of the body changes, the shape of its orbit changes from a circle to an ellipse. Upon reaching the second cosmic velocity, equal to the orbit becomes parabolic.
15. Body momentum. Law of conservation of momentum. Jet propulsion.
According to Newton's second law, regardless of whether the body was at rest or moving, a change in its speed can only occur when interacting with other bodies. If on a body of mass m for a time t a force acts and the speed of its movement changes from to , then the acceleration of the body is equal to . Based on Newton's second law, the force can be written as . The physical quantity equal to the product of the force and the time of its action is called the impulse of the force. The impulse of force shows that there is a quantity that changes equally for all bodies under the influence of the same forces, if the duration of the force is the same. This value, equal to the product of the mass of the body and the speed of its movement, is called the momentum of the body. The change in the momentum of the body is equal to the momentum of the force that caused this change. Let's take two bodies, masses and , moving with velocities and . According to Newton's third law, the forces acting on bodies during their interaction are equal in absolute value and opposite in direction, i.e. they can be denoted as . For changes in momenta during interaction, we can write . From these expressions we get that 
, that is, the vector sum of the impulses of two bodies before the interaction is equal to the vector sum of the impulses after the interaction. In more general view the law of conservation of momentum sounds like this: If, then.
16. Mechanical work. Power. Kinetic and potential energy.
work BUT constant force is a physical quantity equal to the product of the modules of force and displacement, multiplied by the cosine of the angle between the vectors and. 
. Work is a scalar quantity and can be negative if the angle between the displacement and force vectors is greater than . The unit of work is called the joule, 1 joule is equal to the work done by a force of 1 newton when the point of its application moves 1 meter. Power is a physical quantity equal to the ratio of work to the period of time during which this work was performed. . The unit of power is called a watt, 1 watt is equal to the power at which work of 1 joule is done in 1 second. Let us assume that on a body of mass m a force acts (which can generally be the resultant of several forces), under the influence of which the body moves in the direction of the vector . The modulus of force according to Newton's second law is ma, and the modulus of the displacement vector is related to the acceleration and the initial and final speeds as. From here, the formula to work is obtained 
. A physical quantity equal to half the product of the mass of the body and the square of the speed is called kinetic energy. The work of the resultant forces applied to the body is equal to the change in kinetic energy. The physical quantity equal to the product of the body mass times the free fall acceleration module and the height to which the body is raised above the surface with zero potential is called the potential energy of the body. The change in potential energy characterizes the work of gravity in moving the body. This work is equal to the change in potential energy taken from opposite sign. A body below the earth's surface has a negative potential energy. Not only raised bodies have potential energy. Consider the work done by the elastic force when the spring is deformed. The elastic force is directly proportional to the deformation, and its average value will be equal to 
, work is equal to the product of force and deformation 
, or 
. A physical quantity equal to half the product of the stiffness of the body and the square of the deformation is called the potential energy of the deformed body. An important characteristic potential energy is that a body cannot possess it without interacting with other bodies.
17. Laws of conservation of energy in mechanics.
Potential energy characterizes interacting bodies, kinetic - moving. Both that, and another arise as a result of interaction of bodies. If several bodies interact with each other only by gravitational forces and elastic forces, and no external forces act on them (or their resultant is zero), then for any interactions of bodies, the work of the elastic or gravitational forces is equal to the change in potential energy, taken with the opposite sign . At the same time, according to the kinetic energy theorem (the change in the kinetic energy of a body is equal to the work of external forces), the work of the same forces is equal to the change in kinetic energy. . It follows from this equality that the sum of the kinetic and potential energies of the bodies that make up a closed system and interact with each other by the forces of gravity and elasticity remains constant. The sum of the kinetic and potential energies of bodies is called the total mechanical energy. The total mechanical energy of a closed system of bodies interacting with each other by gravitational and elastic forces remains unchanged. The work of the forces of gravity and elasticity is equal, on the one hand, to an increase in kinetic energy, and on the other hand, to a decrease in potential energy, that is, the work is equal to the energy that has turned from one form to another.
18. Simple mechanisms (inclined plane, lever, block) their application.
An inclined plane is used to make the body large mass could be moved by the action of a force much less than the weight of the body. If the angle of the inclined plane is equal to a, then to move the body along the plane, it is necessary to apply a force equal to . The ratio of this force to the weight of the body, neglecting the friction force, is equal to the sine of the angle of inclination of the plane. But with a gain in strength, there is no gain in work, because the path is multiplied. This result is a consequence of the law of conservation of energy, since the work of gravity does not depend on the trajectory of the lifting of the body.
The lever is in equilibrium if the moment of forces that rotates it clockwise is equal to the moment il that rotates the lever counterclockwise. If the directions of the vectors of forces applied to the lever are perpendicular to the shortest straight lines connecting the points of application of forces and the axis of rotation, then the equilibrium conditions take the form. If , then the lever provides a gain in strength . A gain in strength does not give a gain in work, since when rotated through an angle a, the force does work, and the force does work. Because according to the condition , then .
The block allows you to change the direction of the force. The shoulders of the forces applied to different points of the immovable block are the same, and therefore the immovable block does not give a gain in strength. When lifting a load with the help of a movable block, a twofold gain in strength is obtained, because. the arm of gravity is half the arm of the cable tension. But when pulling the cable to a length l the load rises l/2, therefore, a fixed block also does not give a gain in work.
19. Pressure. Pascal's law for liquids and gases.
The physical quantity equal to the ratio of the modulus of force acting perpendicular to the surface to the area of this surface is called pressure. The unit of pressure is the pascal, which is equal to the pressure exerted by a force of 1 newton per area of 1 square meter. All liquids and gases transmit the pressure produced on them in all directions.
20. Communicating vessels. Hydraulic Press. Atmosphere pressure. Bernoulli equation.
In a cylindrical vessel, the pressure force on the bottom of the vessel is equal to the weight of the liquid column. The pressure at the bottom of the vessel is 
, whence the pressure at depth h equals . The same pressure acts on the walls of the vessel. The equality of fluid pressures at the same height leads to the fact that in communicating vessels of any shape, the free surfaces of a homogeneous fluid at rest are at the same level (in the case of negligibly small capillary forces). In the case of an inhomogeneous liquid, the height of a column of a denser liquid will be less than the height of a less dense one. The hydraulic machine works on the basis of Pascal's law. It consists of two communicating vessels closed by pistons of different areas. The pressure produced by an external force on one piston is transmitted according to Pascal's law to the second piston. 
. A hydraulic machine gives a gain in power as many times as the area of its large piston more area small.
In the stationary motion of an incompressible fluid, the continuity equation is valid. For an ideal fluid in which viscosity (i.e., friction between its particles) can be neglected, the mathematical expression for the law of conservation of energy is the Bernoulli equation 
.
21. Experience of Torricelli. Change in atmospheric pressure with altitude.
Under the influence of gravity, the upper layers of the atmosphere put pressure on the underlying ones. This pressure, according to Pascal's law, is transmitted in all directions. Highest value this pressure is at the surface of the Earth, and is due to the weight of the air column from the surface to the boundary of the atmosphere. With an increase in altitude, the mass of the layers of the atmosphere that presses on the surface decreases, therefore, atmospheric pressure decreases with height. At sea level, atmospheric pressure is 101 kPa. This pressure is exerted by a mercury column 760 mm high. If a tube is lowered into liquid mercury, in which a vacuum is created, then under the influence of atmospheric pressure, mercury will rise in it to such a height at which the pressure of the liquid column becomes equal to the external atmospheric pressure on the exposed surface of mercury. When atmospheric pressure changes, the height of the liquid column in the tube will also change.
22. Archimedean force of the day of liquids and gases. Sailing conditions tel.
The dependence of pressure in a liquid and gas on depth leads to the emergence of a buoyant force acting on any body immersed in a liquid or gas. This force is called the Archimedean force. If a body is immersed in a liquid, then the pressures on the side walls of the vessel are balanced by each other, and the resultant of the pressures from below and from above is the Archimedean force. , i.e. The force that pushes a body immersed in a liquid (gas) is equal to the weight of the liquid (gas) displaced by the body. The Archimedean force is directed opposite to the force of gravity, therefore, when weighing in a liquid, the weight of a body is less than in a vacuum. A body in a liquid is affected by gravity and the Archimedean force. If the force of gravity is greater in modulus - the body sinks, if it is less - it floats, equal - it can be in balance at any depth. These ratios of forces are equal to the ratios of the densities of the body and the liquid (gas).
23. Basic provisions of the molecular kinetic theory and their experimental substantiation. Brownian motion. Weight and size molecules.
Molecular-kinetic theory is the study of the structure and properties of matter, using the concept of the existence of atoms and molecules as smallest particles substances. The main provisions of the MKT: the substance consists of atoms and molecules, these particles move randomly, the particles interact with each other. The movement of atoms and molecules and their interaction is subject to the laws of mechanics. At first, in the interaction of molecules when they approach each other, attractive forces prevail. At a certain distance between them, repulsive forces arise, exceeding the force of attraction in absolute value. Molecules and atoms make random vibrations about positions where the forces of attraction and repulsion balance each other. In a liquid, molecules not only oscillate, but also jump from one equilibrium position to another (fluidity). In gases, the distances between atoms are much more sizes molecules (compressibility and extensibility). R. Brown at the beginning of the 19th century discovered that solid particles move randomly in a liquid. This phenomenon could only be explained by MKT. Randomly moving molecules of a liquid or gas collide with a solid particle and change the direction and modulus of the speed of its movement (while, of course, changing both their direction and speed). The smaller the particle size, the more noticeable the change in momentum becomes. Any substance consists of particles, therefore the amount of a substance is considered to be proportional to the number of particles. The unit of quantity of a substance is called a mole. A mole is equal to the amount of a substance containing as many atoms as there are in 0.012 kg of carbon 12 C. The ratio of the number of molecules to the amount of substance is called the Avogadro constant: 
. The amount of a substance can be found as the ratio of the number of molecules to the Avogadro constant. molar mass M is called a quantity equal to the ratio of the mass of a substance m to the amount of substance. Molar mass is expressed in kilograms per mole. molar mass can be expressed in terms of the mass of the molecule m0 : 
.
24. Ideal gas. The basic equation of the molecular-kinetic theory of an ideal gas.
The ideal gas model is used to explain the properties of matter in the gaseous state. This model assumes the following: gas molecules are negligible in size compared to the volume of the vessel, there are no attractive forces between the molecules, and when they collide with each other and the walls of the vessel, repulsive forces act. A qualitative explanation of the phenomenon of gas pressure is that the molecules of an ideal gas, when colliding with the walls of the vessel, interact with them as elastic bodies. When a molecule collides with the wall of the vessel, the projection of the velocity vector on the axis perpendicular to the wall changes to the opposite one. Therefore, during a collision, the velocity projection changes from –mv x before mv x, and the change in momentum is . During the collision, the molecule acts on the wall with a force equal, according to Newton's third law, to a force opposite in direction. There are a lot of molecules, and the average value of the geometric sum of forces acting on the part of individual molecules forms the force of gas pressure on the walls of the vessel. The gas pressure is equal to the ratio of the modulus of the pressure force to the area of the vessel wall: p=F/S. Assume that the gas is in a cubic vessel. The momentum of one molecule is 2 mv, one molecule acts on the wall on average with a force 2mv/Dt. Time D t movement from one vessel wall to another 2l/v, Consequently, . The force of pressure on the vessel wall of all molecules is proportional to their number, i.e. 
. Due to the complete randomness of the movement of molecules, their movement in each of the directions is equiprobable and equal to 1/3 of the total number of molecules. In this way, . Since pressure is exerted on the face of a cube with an area l 2, then the pressure will be the same. This equation is called the basic equation of molecular kinetic theory. Denoting for the average kinetic energy of the molecules, we get.
25. Temperature, its measurement. Absolute temperature scale. The speed of gas molecules.
The basic MKT equation for an ideal gas establishes a relationship between micro- and macroscopic parameters. When two bodies come into contact, their macroscopic parameters change. When this change has ceased, it is said that thermal equilibrium has set in. A physical parameter that is the same in all parts of a system of bodies in a state of thermal equilibrium is called body temperature. Experiments have shown that for any gas in a state of thermal equilibrium, the ratio of the product of pressure and volume to the number of molecules is the same 
. This allows the value to be taken as a measure of temperature. Because n=N/V, then, taking into account the basic equation of the MKT, therefore, the value is equal to two thirds of the average kinetic energy of the molecules. , where k– coefficient of proportionality, depending on the scale. The parameters on the left side of this equation are non-negative. Hence, the gas temperature at which its pressure at constant volume is zero is called absolute zero temperature. The value of this coefficient can be found in two known states substances with known pressure, volume, number of molecules, temperature. . Coefficient k, called the Boltzmann constant, is equal to 
. It follows from the equations of relation between temperature and average kinetic energy, i.e. the average kinetic energy of the random motion of molecules is proportional to the absolute temperature. , . This equation shows that at the same temperature and concentration of molecules, the pressure of any gases is the same.
26. Equation of state of an ideal gas (Mendeleev-Clapeyron equation). Isothermal, isochoric and isobaric processes.
Using the dependence of pressure on concentration and temperature, one can find a relationship between the macroscopic parameters of a gas - volume, pressure and temperature. . This equation is called the ideal gas equation of state (Mendeleev-Clapeyron equation).
An isothermal process is a process that takes place at a constant temperature. From the equation of state of an ideal gas, it follows that at a constant temperature, mass and composition of the gas, the product of pressure and volume should remain constant. The graph of an isotherm (curve of an isothermal process) is a hyperbola. The equation is called the Boyle-Mariotte law.
An isochoric process is a process that occurs at a constant volume, mass and composition of the gas. Under these conditions 
, where is the temperature coefficient of gas pressure. This equation is called Charles' law. The graph of the equation of an isochoric process is called an isochore, and is a straight line passing through the origin.
An isobaric process is a process that occurs at a constant pressure, mass and composition of the gas. In the same way as for the isochoric process, we can obtain the equation for the isobaric process 
. The equation describing this process is called the Gay-Lussac law. The graph of the equation of an isobaric process is called an isobar, and is a straight line passing through the origin.
27. Internal energy. Work in thermodynamics.
If the potential energy of interaction of molecules is zero, then the internal energy is equal to the sum of the kinetic energies of motion of all gas molecules 
. Therefore, when the temperature changes, the internal energy of the gas also changes. Substituting the equation of state of an ideal gas into the equation for energy, we obtain that the internal energy is directly proportional to the product of gas pressure and volume. . The internal energy of a body can change only when interacting with other bodies. In the case of mechanical interaction of bodies (macroscopic interaction), the measure of the transferred energy is the work BUT. In heat transfer (microscopic interaction), the measure of the transferred energy is the amount of heat Q. In a non-isolated thermodynamic system, the change in internal energy D U equal to the sum of the transferred amount of heat Q and the work of external forces BUT. Instead of work BUT performed by external forces, it is more convenient to consider the work A` performed by the system on external bodies. A=-A`. Then the first law of thermodynamics is expressed as, or. This means that any machine can do work on external bodies only by receiving heat from the outside. Q or decrease in internal energy D U. This law excludes the creation of a perpetual motion machine of the first kind.
28. Quantity of heat. Specific heat capacity of a substance. The law of conservation of energy in thermal processes (the first law of thermodynamics).
The process of transferring heat from one body to another without doing work is called heat transfer. The energy transferred to the body as a result of heat transfer is called the amount of heat. If the heat transfer process is not accompanied by work, then on the basis of the first law of thermodynamics. The internal energy of a body is proportional to the mass of the body and its temperature, therefore 
. Value from is called specific heat capacity, the unit is . Specific heat capacity shows how much heat must be transferred to heat 1 kg of a substance by 1 degree. Specific heat capacity is not an unambiguous characteristic, and depends on the work done by the body during heat transfer.
In the implementation of heat transfer between two bodies under conditions of equality to zero of the work of external forces and in thermal insulation from other bodies, according to the law of conservation of energy 
. If the change in internal energy is not accompanied by work, then , or , whence . This equation is called the heat balance equation.
29. Application of the first law of thermodynamics to isoprocesses. adiabatic process. Irreversibility of thermal processes.
One of the main processes that do work in most machines is the expansion of a gas to do work. If during the isobaric expansion of gas from volume V 1 up to volume V 2 displacement of the cylinder piston was l, then work A perfect gas is equal to , or 
. If we compare the areas under the isobar and the isotherm, which are works, we can conclude that with the same expansion of the gas at the same initial pressure, in the case of an isothermal process, less work will be done. In addition to isobaric, isochoric and isothermal processes, there is a so-called. adiabatic process. A process is said to be adiabatic if there is no heat transfer. The process of rapid gas expansion or compression can be considered close to adiabatic. In this process, work is done due to a change in internal energy, i.e. , therefore, during the adiabatic process, the temperature decreases. Since the gas temperature rises during adiabatic compression of a gas, the gas pressure increases faster with a decrease in volume than during an isothermal process.
Heat transfer processes spontaneously occur in only one direction. Heat is always transferred to a colder body. The second law of thermodynamics states that a thermodynamic process is not feasible, as a result of which heat would be transferred from one body to another, hotter one, without any other changes. This law excludes the creation of a perpetual motion machine of the second kind.
30. The principle of operation of heat engines. heat engine efficiency.
In heat engines, work is usually done by the expanding gas. The gas that does work during expansion is called the working fluid. The expansion of a gas occurs as a result of an increase in its temperature and pressure when heated. A device from which the working fluid receives an amount of heat Q called a heater. The device to which the machine gives off heat after a working stroke is called a refrigerator. First, the pressure rises isochorically, expands isobarically, cools isochorically, contracts isobarically.<рисунок с подъемником>. As a result of the working cycle, the gas returns to its initial state, its internal energy takes its original value. It means that . According to the first law of thermodynamics, . The work done by the body per cycle is equal to Q. The amount of heat received by the body per cycle is equal to the difference between that received from the heater and given to the refrigerator. Consequently, . The efficiency of a machine is the ratio of useful energy used to energy expended. 
.
31. Evaporation and condensation. Saturated and unsaturated pairs. Air humidity.
The uneven distribution of the kinetic energy of thermal motion leads to this. That at any temperature the kinetic energy of some of the molecules can exceed the potential energy of binding with the rest. Evaporation is the process by which molecules escape from the surface of a liquid or solid. Evaporation is accompanied by cooling, because faster molecules leave the liquid. The evaporation of a liquid in a closed vessel at a constant temperature leads to an increase in the concentration of molecules in the gaseous state. After some time, an equilibrium occurs between the number of molecules evaporating and returning to the liquid. A gaseous substance in dynamic equilibrium with its liquid is called saturated vapor. Steam at a pressure below the saturated steam pressure is called unsaturated. Saturated vapor pressure does not depend on the volume (from ) at constant temperature. At a constant concentration of molecules, the pressure of saturated vapor increases faster than the pressure of an ideal gas, because the number of molecules increases with temperature. The ratio of the water vapor pressure at a given temperature to the saturation vapor pressure at the same temperature, expressed as a percentage, is called relative humidity air . The lower the temperature, the lower the saturated vapor pressure, so when cooled to a certain temperature, the vapor becomes saturated. This temperature is called the dew point. tp.
32. Crystalline and amorphous bodies. Mechanical properties of solids. Elastic deformations.
Amorphous bodies are those whose physical properties are the same in all directions (isotropic bodies). The isotropy of physical properties is explained by the random arrangement of molecules. Solids in which molecules are ordered are called crystals. The physical properties of crystalline bodies are not the same in different directions (anisotropic bodies). The anisotropy of the properties of crystals is explained by the fact that with an ordered structure, the interaction forces are not the same in different directions. External mechanical action on the body causes the displacement of atoms from the equilibrium position, which leads to a change in the shape and volume of the body - deformation. Deformation can be characterized by absolute elongation, equal to the difference between the lengths before and after deformation, or by relative elongation. When the body is deformed, elastic forces arise. A physical quantity equal to the ratio of the modulus of elasticity to the cross-sectional area of \u200b\u200bthe body is called mechanical stress. At small strains, the stress is directly proportional to the relative elongation. Proportionality factor E in the equation is called the elastic modulus (Young's modulus). The modulus of elasticity is constant for a given material 
, where . The potential energy of a deformed body is equal to the work expended in tension or compression. From here 
.
Hooke's law is satisfied only for small deformations. The maximum voltage at which it is still performed is called the proportional limit. Beyond this limit, the voltage stops increasing proportionally. Up to a certain level of stress, the deformed body will restore its dimensions after the load is removed. This point is called the elastic limit of the body. When the elastic limit is exceeded, plastic deformation begins, in which the body does not restore its previous shape. In the region of plastic deformation, the stress almost does not increase. This phenomenon is called material flow. Beyond the yield point, the stress rises to a point called ultimate strength, after which the stress decreases until the body breaks.
33. Properties of liquids. Surface tension. capillary phenomena.
The possibility of free movement of molecules in a liquid determines the fluidity of the liquid. The body in the liquid state does not have a permanent shape. The shape of the liquid is determined by the shape of the vessel and the forces of surface tension. Inside the liquid, the attractive forces of the molecules are compensated, but not near the surface. Any molecule near the surface is attracted by the molecules inside the liquid. Under the action of these forces, the molecules are drawn into the surface until the free surface becomes the smallest of all possible. Because If a ball has a minimum surface for a given volume, then with a small action of other forces, the surface takes the form of a spherical segment. The surface of the liquid at the edge of the vessel is called the meniscus. The wetting phenomenon is characterized by the contact angle between the surface and the meniscus at the point of intersection. The magnitude of the surface tension force in a section of length D l is equal to . The curvature of the surface creates an excess pressure on the liquid, equal to the known contact angle and radius 
. The coefficient s is called the surface tension coefficient. A capillary is a tube with a small internal diameter. With complete wetting, the surface tension force is directed along the surface of the body. In this case, the rise of the liquid through the capillary continues under the action of this force until the force of gravity balances the force of surface tension, tk. , then .
34. Electric charge. Interaction of charged bodies. Coulomb's law. The law of conservation of electric charge.
Neither mechanics nor MKT is able to explain the nature of the forces that bind atoms. The laws of interaction of atoms and molecules can be explained on the basis of the concept of electric charges.<Опыт с натиранием ручки и притяжением бумажки>The interaction of bodies found in this experiment is called electromagnetic, and is determined by electric charges. The ability of charges to attract and repel is explained by the assumption that there are two types of charges - positive and negative. Bodies with the same charge repel each other, and objects with different charges attract. The unit of charge is the pendant - the charge passing through the cross section of the conductor in 1 second at a current strength of 1 ampere. In a closed system, which does not include electric charges from outside and from which electric charges do not go out during any interactions, the algebraic sum of the charges of all bodies is constant. The basic law of electrostatics, also known as Coulomb's law, states that the modulus of the interaction force between two charges is directly proportional to the product of the modules of the charges and inversely proportional to the square of the distance between them. The force is directed along the straight line connecting the charged bodies. Is the force of repulsion or attraction, depending on the sign of the charges. Constant k in the expression of Coulomb's law is equal to 
. Instead of this coefficient, the so-called. electrical constant associated with the coefficient k expression from where. The interaction of fixed electric charges is called electrostatic.
35. Electric field. Electric field strength. The principle of superposition of electric fields.
Around each charge, based on the theory of short-range action, there is an electric field. The electric field is a material object that constantly exists in space and is able to act on other charges. The electric field propagates in space at the speed of light. A physical quantity equal to the ratio of the force with which the electric field acts on a test charge (a point positive small charge that does not affect the configuration of the field) to the value of this charge is called the electric field strength. Using Coulomb's law, it is possible to obtain a formula for the field strength created by the charge q on distance r from charge 
. The strength of the field does not depend on the charge on which it acts. If on charge q the electric fields of several charges act simultaneously, then the resulting force is equal to the geometric sum of the forces acting from each field separately. This is called the principle of superposition of electric fields. The electric field strength line is the line, the tangent to which at each point coincides with the strength vector. Tension lines start on positive charges and end on negative ones, or go to infinity. An electric field whose intensity is the same for everyone at any point in space is called a uniform electric field. Approximately homogeneous field can be considered between two parallel oppositely charged metal plates. With a uniform charge distribution q on the surface of the area S the surface charge density is . For an infinite plane with a surface charge density s, the field strength is the same at all points in space and is equal to 
.
36. The work of the electrostatic field when moving the charge. Potential difference.
When a charge is moved by an electric field over a distance, the work done is equal to 
. As in the case of the work of gravity, the work of the Coulomb force does not depend on the trajectory of the charge. When the direction of the displacement vector changes by 180 0, the work of the field forces changes sign to the opposite. Thus, the work of the forces of the electrostatic field when moving the charge along a closed circuit is equal to zero. The field, the work of forces of which along a closed trajectory is equal to zero, is called a potential field.
Just like a body of mass m in the field of gravity has a potential energy proportional to the mass of the body, an electric charge in an electrostatic field has a potential energy Wp, proportional to the charge. The work of the forces of the electrostatic field is equal to the change in the potential energy of the charge, taken with the opposite sign. At one point in the electrostatic field, different charges can have different potential energies. But the ratio of potential energy to charge for a given point is a constant value. This physical quantity is called electric field potential, whence the potential energy of the charge is equal to the product of the potential at a given point and the charge. Potential is a scalar quantity, the potential of several fields is equal to the sum of the potentials of these fields. The measure of energy change during the interaction of bodies is work. When the charge moves, the work of the forces of the electrostatic field is equal to the change in energy with the opposite sign, therefore. Because work depends on the potential difference and does not depend on the trajectory between them, then the potential difference can be considered an energy characteristic of the electrostatic field. If the potential at an infinite distance from the charge is taken equal to zero, then at a distance r from the charge, it is determined by the formula .
The ratio of the work done by any electric field when moving a positive charge from one point of the field to another, to the value of the charge is called the voltage between these points, where work comes from. In an electrostatic field, the voltage between any two points is equal to the potential difference between these points. The unit of voltage (and potential difference) is called the volt, . 1 volt is the voltage at which the field does 1 joule of work to move a charge of 1 coulomb. On the one hand, the work of moving the charge is equal to the product of the force and the displacement. On the other hand, it can be found from the known voltage between track sections. From here. The unit of electric field strength is volts per meter ( i/m).
Capacitor - a system of two conductors separated by a dielectric layer, the thickness of which is small compared to the dimensions of the conductors. Between the plates, the field strength is equal to twice the strength of each of the plates; outside the plates, it is equal to zero. A physical quantity equal to the ratio of the charge of one of the plates to the voltage between the plates is called the capacitance of the capacitor. The unit of electrical capacity is farad, a capacitor has a capacity of 1 farad, between the plates of which the voltage is 1 volt when the plates are charged with 1 pendant. The field strength between the plates of a solid capacitor is equal to the sum of the strength of its plates. 
, and since for a homogeneous field is satisfied, then 
, i.e. capacitance is directly proportional to the area of the plates and inversely proportional to the distance between them. When a dielectric is introduced between the plates, its capacitance increases by a factor of e, where e is the dielectric constant of the introduced material.
38. The dielectric constant. Electric field energy.
Dielectric permittivity is a physical quantity that characterizes the ratio of the modulus of the electric field in vacuum to the modulus of the electric field in a homogeneous dielectric. The work of the electric field is equal, but when the capacitor is charged, its voltage rises from 0
before U, that's why 
. Therefore, the potential energy of the capacitor is equal to .
39. Electric current. Current strength. Conditions for the existence of an electric current.
Electric current is the orderly movement of electric charges. The direction of the current is taken to be the movement of positive charges. Electric charges can move in an orderly manner under the influence of an electric field. Therefore, a sufficient condition for the existence of a current is the presence of a field and free charge carriers. An electric field can be created by two connected oppositely charged bodies. Charge ratio D q, transferred through the cross section of the conductor for the time interval D t to this interval is called current strength. If the current strength does not change with time, then the current is called constant. For a current to exist in a conductor for a long time, it is necessary that the conditions causing the current be unchanged.<схема с один резистором и батареей>. The forces that cause the charge to move inside the current source are called external forces. In a galvanic cell (and any battery - g.e.???) they are the forces of a chemical reaction, in a direct current machine - the Lorentz force.
40. Ohm's law for a chain section. conductor resistance. The dependence of the resistance of conductors on temperature. Superconductivity. Series and parallel connection of conductors.
The ratio of voltage between the ends of a section of an electrical circuit to the strength of the current is a constant value, and is called resistance. The unit of resistance is 0 ohm, the resistance of 1 ohm has such a section of the circuit in which, at a current strength of 1 ampere, the voltage is 1 volt. The resistance is directly proportional to the length and inversely proportional to the cross-sectional area, where r is the electrical resistivity, a constant value for a given substance under given conditions. When heated resistivity metals increases linearly, where r 0 is the resistivity at 0 0 С, a is the temperature coefficient of resistance, specific for each metal. At temperatures close to absolute zero, the resistance of substances drops sharply to zero. This phenomenon is called superconductivity. The passage of current in superconducting materials occurs without loss by heating the conductor.
Ohm's law for a section of a circuit is called an equation. When the conductors are connected in series, the current strength is the same in all conductors, and the voltage at the ends of the circuit is equal to the sum of the voltages on all the conductors connected in series. . When the conductors are connected in series, the total resistance is equal to the sum of the resistances of the components. With a parallel connection, the voltage at the ends of each section of the circuit is the same, and the current strength branches into separate parts. From here. When conductors are connected in parallel, the reciprocal of the total resistance is equal to the sum of the reciprocals of the resistances of all conductors connected in parallel.
41. Work and current power. Electromotive force. Ohm's law for a complete circuit.
The work of the forces of the electric field that creates an electric current is called the work of the current. Work BUT current in the area with resistance R in time D t is equal to . The power of the electric current is equal to the ratio of work to the time of completion, i.e. 
. Work is expressed, as usual, in joules, power - in watts. If no work is done on the circuit section under the influence of an electric field and no chemical reactions occur, then the work leads to heating of the conductor. In this case, the work is equal to the amount of heat released by the current-carrying conductor (Joule-Lenz Law).
In an electric circuit, work is done not only in the external section, but also in the battery. The electrical resistance of a current source is called internal resistance r. In the inner section of the circuit, an amount of heat equal to is released. Full work forces of the electrostatic field when moving along a closed circuit is zero, so all the work is done due to external forces that maintain a constant voltage. The ratio of the work of external forces to the transferred charge is called the electromotive force of the source, where D q- transferable charge. If as a result of the passage of direct current only heating of the conductors occurred, then according to the law of conservation of energy 
, i.e. . The current in an electrical circuit is directly proportional to the EMF and inversely proportional to the impedance of the circuit.
42. Semiconductors. Electrical conductivity of semiconductors and its dependence on temperature. Intrinsic and impurity conductivity of semiconductors.
Many substances do not conduct current as well as metals, but at the same time they are not dielectrics. One of the differences between semiconductors is that when heated or illuminated, their resistivity does not increase, but decreases. But their main practically applicable property turned out to be unilateral conductivity. Due to the uneven distribution of the energy of thermal motion in a semiconductor crystal, some atoms are ionized. The released electrons cannot be captured by the surrounding atoms, because their valence bonds are saturated. These free electrons can move around in the metal, creating an electron conduction current. At the same time, an atom, from the shell of which an electron escaped, becomes an ion. This ion is neutralized by capturing an atom of a neighbor. As a result of such a chaotic movement, a movement of a place with a missing ion occurs, which is outwardly visible as a movement of a positive charge. This is called hole conduction current. In an ideal semiconductor crystal, current is generated by the movement of an equal number of free electrons and holes. This type of conduction is called intrinsic conduction. As the temperature decreases, the number of free electrons, which is proportional to the average energy of the atoms, decreases and the semiconductor becomes similar to a dielectric. Impurities are sometimes added to a semiconductor to improve conductivity, which are donor (increase the number of electrons without increasing the number of holes) and acceptor (increase the number of holes without increasing the number of electrons). Semiconductors where the number of electrons exceeds the number of holes are called electronic semiconductors, or n-type semiconductors. Semiconductors where the number of holes exceeds the number of electrons are called hole semiconductors, or p-type semiconductors.
43. semiconductor diode. Transistor.
A semiconductor diode is made up of pn transition, i.e. from two connected semiconductors different type conductivity. When combined, electrons diffuse into R-semiconductor. This leads to the appearance of uncompensated positive ions of the donor impurity in the electronic semiconductor, and negative ions of the acceptor impurity, which captured the diffused electrons, in the hole semiconductor. An electric field develops between the two layers. If a positive charge is applied to the region with electronic conductivity, and a negative charge is applied to the region with hole conductivity, then the blocking field will increase, the current strength will drop sharply and is almost independent of voltage. This method of switching on is called blocking, and the current flowing in the diode is called reverse. If a positive charge is applied to the region with hole conductivity, and a negative charge is applied to the region with electronic, then the blocking field will weaken, the current through the diode in this case depends only on the resistance of the external circuit. This method of switching on is called throughput, and the current flowing in the diode is called direct.
A transistor, also known as a semiconductor triode, consists of two pn(or n-p) transitions. The middle part of the crystal is called the base, the extreme ones are the emitter and collector. Transistors in which the base has hole conductivity are called transistors. p-n-p transition. To drive a transistor p-n-p-type, a voltage of negative polarity relative to the emitter is applied to the collector. The base voltage can be either positive or negative. Because there are more holes, then the main current through the junction will be the diffusion flux of holes from R- areas. If a small forward voltage is applied to the emitter, then a hole current will flow through it, diffusing from R-areas in n-area (base). But since the base is narrow, then the holes fly through it, accelerated by the field, into the collector. (???, something here I misunderstood ...). The transistor is able to distribute the current, thereby amplifying it. The ratio of the change in current in the collector circuit to the change in current in the base circuit, all other things being equal, is a constant value, called the integral base current transfer coefficient. Therefore, by changing the current in the base circuit, it is possible to obtain changes in the current in the collector circuit. (???)
44. Electric current in gases. Types of gas discharges and their application. The concept of plasma.
Gas under the influence of light or heat can become a current conductor. The phenomenon of current passing through a gas under the condition of external influence is called non-self-sustaining. electrical discharge. The process of formation of gas ions under the influence of temperature is called thermal ionization. The appearance of ions under the influence of light radiation is photoionization. A gas in which a significant part of the molecules are ionized is called a plasma. The plasma temperature reaches several thousand degrees. Plasma electrons and ions are able to move under the influence of an electric field. With an increase in the field strength, depending on the pressure and nature of the gas, a discharge occurs in it without the influence of external ionizers. This phenomenon is called self-sustaining electrical discharge. In order for an electron to ionize an atom when it hits it, it must have an energy not less than the work of ionization. This energy can be acquired by an electron under the influence of the forces of an external electric field in a gas on its free path, i.e. 
. Because the mean free path is small, self-discharge is possible only at high field strengths. At low gas pressure, a glow discharge is formed, which is explained by an increase in gas conductivity during rarefaction (the mean free path increases). If the current strength in the self-discharge is very high, then electron impacts can cause heating of the cathode and anode. Electrons are emitted from the cathode surface at high temperature, which maintains the discharge in the gas. This type of discharge is called arc.
45. Electric current in a vacuum. Thermionic emission. Cathode-ray tube.
There are no free charge carriers in vacuum, so without external influence there is no current in vacuum. It can occur if one of the electrodes is heated to high temperature. The heated cathode emits electrons from its surface. The phenomenon of emission of free electrons from the surface of heated bodies is called thermionic emission. The simplest device that uses thermionic emission is an electrovacuum diode. The anode consists of a metal plate, the cathode is made of a thin coiled wire. An electron cloud is created around the cathode when it is heated. If you connect the cathode to the positive terminal of the battery, and the anode to the negative terminal, then the field inside the diode will shift the electrons towards the cathode, and there will be no current. If you connect the opposite - the anode to the plus, and the cathode to the minus - then the electric field will move the electrons towards the anode. This explains the property of one-sided conduction of the diode. The flow of electrons moving from the cathode to the anode can be controlled using an electromagnetic field. To do this, the diode is modified and a grid is added between the anode and cathode. The resulting device is called a triode. If a negative potential is applied to the grid, then the field between the grid and the cathode will prevent the electron from moving. If you apply positive, then the field will prevent the movement of electrons. The electrons emitted by the cathode can be dispersed with the help of electric fields to high speeds. The ability of electron beams to deviate under the influence of electromagnetic fields is used in a CRT.
46. Magnetic interaction of currents. A magnetic field. The force acting on a current-carrying conductor in a magnetic field. Magnetic field induction.
If a current is passed through the conductors in the same direction, then they attract, and if equal, then they repel. Consequently, there is some interaction between the conductors, which cannot be explained by the presence of an electric field, since. In general, conductors are electrically neutral. A magnetic field is created by moving electric charges and acts only on moving charges. The magnetic field is a special kind of matter and is continuous in space. The passage of an electric current through a conductor is accompanied by the generation of a magnetic field, regardless of the medium. The magnetic interaction of conductors is used to determine the magnitude of the current strength. 1 ampere - the strength of the current passing through two parallel conductors ¥ of length, and of small cross section, located at a distance of 1 meter from each other, at which the magnetic flux causes an interaction force downwards equal to each meter of length. The force with which a magnetic field acts on a current-carrying conductor is called the ampere force. To characterize the ability of a magnetic field to affect a conductor with current, there is a quantity called magnetic induction. Magnetic induction module is equal to the ratio the maximum value of the Ampere force acting on a current-carrying conductor, to the current strength in the conductor and its length. The direction of the induction vector is determined by the rule of the left hand (by the hand of the conductor, by thumb force, in the palm - induction). The unit of magnetic induction is a tesla, equal to the induction of such a magnetic flux, in which 1 meter of conductor with a current of 1 ampere acts maximum strength Ampere 1 newton. A line at any point of which the magnetic induction vector is directed tangentially is called a line of magnetic induction. If at all points of some space the induction vector has same value modulo and the same direction, then the field in this part is called homogeneous. Depending on the angle of inclination of the current-carrying conductor relative to the vector of magnetic induction, the Ampère force changes in proportion to the sine of the angle.
47. Ampere's law. The action of a magnetic field on a moving charge. Lorentz force.
The action of a magnetic field on a current in a conductor indicates that it acts on moving charges. Current strength I in the conductor is related to the concentration n free charged particles, speed v their orderly movement and area S cross section of the conductor by the expression , where q is the charge of one particle. Substituting this expression into the Ampère force formula, we obtain 
. Because nSl is equal to the number of free particles in a conductor of length l, then the force acting from the side of the field on one charged particle moving at a speed v at an angle a to the magnetic induction vector B is equal to 
. This force is called the Lorentz force. The direction of the Lorentz force for a positive charge is determined by the left hand rule. In a uniform magnetic field, a particle moving perpendicular to the lines of magnetic field induction acquires centripetal acceleration under the action of the Lorentz force 
and moves in a circle. The radius of the circle and the period of revolution are determined by the expressions 
. The independence of the period of revolution from the radius and speed is used in the accelerator of charged particles - the cyclotron.
48. Magnetic properties of matter. Ferromagnets.
The electromagnetic interaction depends on the medium in which the charges are located. If you hang a small coil near a large coil, it will deviate. If an iron core is inserted into a large one, then the deviation will increase. This change shows that the induction changes as the core is introduced. Substances that significantly increase the external magnetic field are called ferromagnets. A physical quantity showing how many times the inductance of a magnetic field in a medium differs from the inductance of a field in a vacuum is called magnetic permeability. Not all substances amplify the magnetic field. Paramagnets create a weak field that coincides in direction with the external one. Diamagnets weaken the external field with their field. Ferromagnetism explained magnetic properties electron. An electron is a moving charge and therefore has its own magnetic field. In some crystals there are conditions for the parallel orientation of the magnetic fields of the electrons. As a result of this, magnetized regions, called domains, appear inside the ferromagnet crystal. As the external magnetic field increases, the domains order their orientation. At a certain value of induction, complete ordering of the orientation of the domains occurs and magnetic saturation sets in. When a ferromagnet is removed from an external magnetic field, not all domains lose their orientation, and the body becomes a permanent magnet. The ordering of domain orientation can be disturbed by thermal vibrations of atoms. The temperature at which a substance ceases to be a ferromagnet is called the Curie temperature.
49. Electromagnetic induction. magnetic flux. The law of electromagnetic induction. Lenz's rule.
In a closed circuit, when the magnetic field changes, an electric current arises. This current is called inductive current. The phenomenon of the occurrence of current in a closed circuit with changes in the magnetic field penetrating the circuit is called electromagnetic induction. The appearance of a current in a closed circuit indicates the presence of external forces of a non-electrostatic nature or the occurrence of induction EMF. A quantitative description of the phenomenon of electromagnetic induction is given on the basis of establishing a relationship between the induction EMF and magnetic flux. magnetic flux F through the surface is called a physical quantity equal to the product of the surface area S per modulus of the magnetic induction vector B and by the cosine of the angle a between it and the normal to the surface . The unit of magnetic flux is the weber, equal to the flux, which, when uniformly decreasing to zero in 1 second, causes an emf of 1 volt. The direction of the induction current depends on whether the flux penetrating the circuit increases or decreases, as well as on the direction of the field relative to the circuit. The general formulation of Lenz's rule: the inductive current arising in a closed circuit has such a direction that the magnetic flux created by it through the area bounded by the circuit tends to compensate for the change in the magnetic flux that causes this current. Law of electromagnetic induction: The EMF of induction in a closed circuit is directly proportional to the rate of change of the magnetic flux through the surface bounded by this circuit and is equal to the rate of change of this flux, while taking into account the Lenz rule. When changing the EMF in a coil consisting of n identical turns, the total emf in n times more EMF in one single coil. For a uniform magnetic field, based on the definition of magnetic flux, it follows that the induction is 1 tesla if the flux through a circuit of 1 square meter is 1 weber. The occurrence of an electric current in a fixed conductor is not explained by magnetic interaction, because The magnetic field only acts on moving charges. The electric field that occurs when the magnetic field changes is called the vortex electric field. The work of the forces of the vortex field on the movement of charges is the EMF of induction. The vortex field is not connected with charges and is a closed line. The work of the forces of this field along a closed contour can be different from zero. The phenomenon of electromagnetic induction also occurs when the magnetic flux source is at rest and the conductor is moving. In this case, the cause of the induction EMF, equal to 
, is the Lorentz force.
50. The phenomenon of self-induction. Inductance. The energy of the magnetic field.
An electric current passing through a conductor creates a magnetic field around it. magnetic flux F through the contour is proportional to the magnetic induction vector IN, and induction, in turn, the strength of the current in the conductor. Therefore, for the magnetic flux, we can write . The coefficient of proportionality is called inductance and depends on the properties of the conductor, its dimensions and the environment in which it is located. The unit of inductance is henry, the inductance is 1 henry, if at a current strength of 1 ampere the magnetic flux is 1 weber. When the current strength in the coil changes, the magnetic flux created by this current changes. A change in the magnetic flux causes the appearance of an EMF induction in the coil. The phenomenon of the appearance of an EMF induction in a coil as a result of a change in the current strength in this circuit is called self-induction. In accordance with the Lenz rule, the EMF of self-induction prevents the increase when the circuit is turned on and decrease when the circuit is turned off. EMF of self-induction arising in a coil with inductance L, according to the law of electromagnetic induction is equal to 
. Suppose that when the network is disconnected from the source, the current decreases according to a linear law. Then the EMF of self-induction has a constant value equal to 
. During t in a linear decrease in the circuit, a charge will pass. In this case, the work of the electric current is equal to 
. This work is done for the light of energy W m magnetic field of the coil.
51. Harmonic vibrations. Amplitude, period, frequency and phase of oscillations.
Mechanical vibrations are the movements of bodies that repeat exactly or approximately the same at regular intervals. The forces acting between bodies within the considered system of bodies are called internal forces. The forces acting on the bodies of the system from other bodies are called external forces. Free oscillations are called oscillations that have arisen under the influence of internal forces, for example, a pendulum on a thread. Vibrations under the action of external forces - forced vibrations For example, a piston in an engine. common signs of all types of oscillations is the repeatability of the process of movement through a certain interval of time. The oscillations described by the equation are called harmonic. 
. In particular, vibrations that occur in a system with one restoring force proportional to deformation are harmonic. The minimum interval through which the movement of the body is repeated is called the period of oscillation. T. The physical quantity that is the reciprocal of the period of oscillation and characterizes the number of oscillations per unit time is called frequency. The frequency is measured in hertz, 1 Hz = 1 s -1. The concept of cyclic frequency is also used, which determines the number of oscillations in 2p seconds. The module of maximum displacement from the equilibrium position is called amplitude. The value under the cosine sign is the phase of oscillations, j 0 is the initial phase of oscillations. The derivatives also change harmonically, and , and the total mechanical energy with an arbitrary deviation X(angle, coordinate, etc.) is 
, where BUT And IN are constants determined by the system parameters. Differentiating this expression and taking into account the absence of external forces, it is possible to write down what , whence .
52. Mathematical pendulum. Vibration of a load on a spring. Oscillation period of a mathematical pendulum and a weight on a spring.
A body of small size, suspended on an inextensible thread, the mass of which is negligible compared to the mass of the body, is called a mathematical pendulum. The vertical position is the position of equilibrium, in which the force of gravity is balanced by the force of elasticity. With small deviations of the pendulum from the equilibrium position, a resultant force arises, directed towards the equilibrium position, and its oscillations are harmonic. The period of harmonic oscillations of a mathematical pendulum at a small swing angle is equal to . To derive this formula, we write Newton's second law for the pendulum. The pendulum is acted upon by the force of gravity and the tension of the string. Their resultant at a small deflection angle is . Consequently, 
, where 
.
With harmonic vibrations of a body suspended on a spring, the elastic force is equal according to Hooke's law. According to Newton's second law.
53. Conversion of energy during harmonic vibrations. Forced vibrations. Resonance.
When the mathematical pendulum deviates from the equilibrium position, its potential energy increases, because the distance to the earth increases. When moving to the equilibrium position, the speed of the pendulum increases, and the kinetic energy increases, due to a decrease in the potential reserve. In the equilibrium position, kinetic energy is maximum, potential energy is minimum. In the position of maximum deviation - vice versa. With spring - the same, but not the potential energy in the Earth's gravitational field, but the potential energy of the spring is taken. Free vibrations always turn out to be damped, i.e. with decreasing amplitude, because energy is spent on interaction with surrounding bodies. The energy loss in this case is equal to the work of external forces during the same time. The amplitude depends on the frequency of the force change. It reaches its maximum amplitude at the frequency of oscillations of the external force, which coincides with the natural frequency of oscillations of the system. The phenomenon of an increase in the amplitude of forced oscillations under the described conditions is called resonance. Since at resonance, the external force performs the maximum positive work for the period, the resonance condition can be defined as the condition for maximum energy transfer to the system.
54. Propagation of vibrations in elastic media. Transverse and longitudinal waves. Wavelength. Relation of the wavelength to the speed of its propagation. Sound waves. Sound speed. Ultrasound
Excitation of oscillations in one place of the medium causes forced oscillations of neighboring particles. The process of propagation of vibrations in space is called a wave. Waves in which oscillations occur perpendicular to the direction of propagation are called shear waves. Waves in which vibrations occur along the direction of wave propagation are called longitudinal waves. Longitudinal waves can arise in all media, transverse waves - in solids under the action of elastic forces during deformation or surface tension forces and gravity forces. The speed of propagation of oscillations v in space is called the speed of the wave. The distance l between points closest to each other, oscillating in the same phases, is called the wavelength. The dependence of the wavelength on the speed and period is expressed as , or . When waves occur, their frequency is determined by the frequency of oscillations of the source, and the speed is determined by the medium where they propagate, so waves of the same frequency can have different lengths in different media. The processes of compression and rarefaction in the air propagate in all directions and are called sound waves. Sound waves are longitudinal. The speed of sound, like the speed of any wave, depends on the medium. In air, the speed of sound is 331 m/s, in water - 1500 m/s, in steel - 6000 m/s. Sound pressure is additional pressure in a gas or liquid caused by a sound wave. The intensity of sound is measured by the energy carried by sound waves per unit of time through a unit area of a section perpendicular to the direction of propagation of the waves, and is measured in watts per square meter. The intensity of a sound determines its loudness. The pitch of the sound is determined by the frequency of vibrations. Ultrasound and infrasound are called sound vibrations that lie beyond the limits of hearing with frequencies of 20 kilohertz and 20 hertz, respectively.
55. Free electromagnetic oscillations in the circuit. Converting energy into oscillatory circuit. Natural frequency of oscillations in the circuit.
An electrical oscillatory circuit is a system consisting of a capacitor and a coil connected in a closed circuit. When a coil is connected to a capacitor, a current is generated in the coil and the energy of the electric field is converted into the energy of a magnetic field. The capacitor does not discharge instantly, because. this is prevented by the EMF of self-induction in the coil. When the capacitor is completely discharged, the self-induction EMF will prevent the current from decreasing, and the energy of the magnetic field will turn into electric energy. The current arising in this case will charge the capacitor, and the sign of the charge on the plates will be opposite to the original. After that, the process is repeated until all the energy is spent on heating the circuit elements. Thus, the energy of the magnetic field in the oscillatory circuit is converted into electric energy and vice versa. For the total energy of the system, it is possible to write the relations: 
, whence for an arbitrary moment of time 
. As is known, for a complete chain 
. Assuming that in the ideal case R"0, finally we get , or . The solution to this differential equation is the function 
, where . The value of w is called its own circular (cyclic) frequency of oscillations in the circuit.
56. Forced electrical oscillations. Alternating electric current. Generator alternating current. AC power.
Alternating current in electrical circuits is the result of excitation of forced electromagnetic oscillations in them. Let a flat coil have an area S and the induction vector B makes an angle j with the perpendicular to the plane of the coil. magnetic flux F through the area of the coil this case is defined by the expression . When the coil rotates with a frequency n, the angle j changes according to the law ., then the expression for the flow will take the form. Changes in magnetic flux create an induction emf equal to minus the rate of flux change. Therefore, the change in the EMF of induction will take place according to the harmonic law. The voltage taken from the generator output is proportional to the number of winding turns. When the voltage changes according to the harmonic law 
the field strength in the conductor varies according to the same law. Under the action of the field, something arises whose frequency and phase coincide with the frequency and phase of voltage oscillations. Fluctuations in the current strength in the circuit are forced, arising under the influence of the applied AC voltage. If the phases of the current and voltage coincide, the power of the alternating current is equal to or 
. The mean value of the squared cosine over the period is 0.5, so . The effective value of the current strength is the direct current strength, which releases the same amount of heat in the conductor as the alternating current. At amplitude Imax harmonic oscillations of the current, the effective voltage is equal to. effective value voltage is also several times less than its amplitude value. The average current power when the oscillation phases coincide is determined through the effective voltage and current strength.
5 7. Active, inductive and capacitive resistance.
active resistance R called a physical quantity equal to the ratio of power to the square of the current, which is obtained from the expression for power. At low frequencies, it practically does not depend on frequency and coincides with the electrical resistance of the conductor.
Let a coil be connected to an alternating current circuit. Then, when the current strength changes according to the law, self-induction emf appears in the coil. Because the electrical resistance of the coil is zero, then the EMF is equal to minus the voltage at the ends of the coil, created by an external generator (??? What other generator???). Therefore, a change in current causes a change in voltage, but with a phase shift 
. The product is the amplitude of the voltage fluctuations, i.e. 
. The ratio of the amplitude of voltage fluctuations on the coil to the amplitude of current fluctuations is called inductive reactance 
.
Let there be a capacitor in the circuit. When it is turned on, it charges for a quarter of the period, then discharges the same amount, then the same thing, but with a change in polarity. When the voltage across the capacitor changes according to the harmonic law the charge on its plates is equal to . The current in the circuit occurs when the charge changes: , similarly to the case with a coil, the amplitude of current oscillations is equal to 
. The value equal to the ratio of the amplitude to the current strength is called capacitance 
.
58. Ohm's law for alternating current.
Consider a circuit consisting of a resistor, a coil, and a capacitor connected in series. At any given time, the applied voltage is equal to the sum of the voltages across each element. Current fluctuations in all elements occur according to the law. The voltage fluctuations across the resistor are in phase with the current fluctuations, the voltage fluctuations across the capacitor lag behind the current fluctuations in phase, the voltage fluctuations across the coil lead the current fluctuations in phase by (why are they behind?). Therefore, the condition of equality of the sum of stresses to the total can be written as. Using the vector diagram, you can see that the voltage amplitude in the circuit is , or , i.e. 
. The impedance of the circuit is denoted 
. It is obvious from the diagram that the voltage also fluctuates according to the harmonic law . The initial phase j can be found by the formula 
. The instantaneous power in the AC circuit is equal to. Since the average value of the squared cosine over the period is 0.5, . If there is a coil and a capacitor in the circuit, then according to Ohm's law for alternating current. The value is called the power factor.
59. Resonance in an electric circuit.
Capacitive and inductive resistances depend on the frequency of the applied voltage. Therefore, at a constant voltage amplitude, the amplitude of the current strength depends on the frequency. At such a frequency value, at which, the sum of the voltages on the coil and the capacitor becomes equal to zero, because their oscillations are opposite in phase. As a result, the voltage on the active resistance at resonance turns out to be equal to the full voltage, and the current strength reaches its maximum value. We express the inductive and capacitive resistances at resonance: 
, Consequently 
. This expression shows that at resonance, the amplitude of the voltage fluctuations on the coil and capacitor can exceed the amplitude of the applied voltage fluctuations.
60. Transformer.
The transformer consists of two coils different amount turns. When a voltage is applied to one of the coils, a current is generated in it. If the voltage changes according to the harmonic law, then the current will also change according to the same law. The magnetic flux passing through the coil is 
. When the magnetic flux changes in each turn of the first coil, self-induction emf arises. The product is the amplitude of the EMF in one turn, the total EMF in the primary coil. The secondary coil is pierced by the same magnetic flux, therefore. Because magnetic fluxes are the same, then. The active resistance of the winding is small compared to the inductive reactance, so the voltage is approximately equal to the EMF. From here. Coefficient TO called the transformation ratio. The heating losses of wires and cores are small, therefore F1" F 2. The magnetic flux is proportional to the current in the winding and the number of turns. Hence , i.e. . Those. the transformer increases the voltage in TO times, reducing the current by the same amount. The current power in both circuits, neglecting losses, is the same.
61. Electromagnetic waves. The speed of their spread. Properties of electromagnetic waves.
Any change in the magnetic flux in the circuit causes the appearance of an induction current in it. Its appearance is explained by the appearance of a vortex electric field with any change in the magnetic field. A vortex electric hearth has the same property as an ordinary one - to generate a magnetic field. Thus, once started, the process of mutual generation of magnetic and electric fields continues uninterruptedly. The electric and magnetic fields that make up electromagnetic waves can also exist in vacuum, unlike other wave processes. From experiments with interference, the speed of propagation of electromagnetic waves was established, which was approximately . In the general case, the speed of an electromagnetic wave in an arbitrary medium is calculated by the formula . The energy density of the electric and magnetic components are equal to each other: 
, where . The properties of electromagnetic waves are similar to those of other wave processes. When passing through the interface between two media, they are partially reflected, partially refracted. They are not reflected from the surface of the dielectric, but are almost completely reflected from metals. Electromagnetic waves have the properties of interference (Hertz experiment), diffraction (aluminum plate), polarization (grid).
62. Principles of radio communication. The simplest radio receiver.
For the implementation of radio communication, it is necessary to provide the possibility of radiation of electromagnetic waves. The larger the angle between the capacitor plates, the more freely EM waves propagate in space. In reality, an open circuit consists of a coil and a long wire - an antenna. One end of the antenna is grounded, the other is raised above the Earth's surface. Because Since the energy of electromagnetic waves is proportional to the fourth power of the frequency, then during oscillations of alternating current of sound frequencies, EM waves practically do not occur. Therefore, the principle of modulation is used - frequency, amplitude or phase. The simplest generator of modulated oscillations is shown in the figure. Let the oscillation frequency of the circuit change according to the law. Let the frequency of the modulated sound vibrations also change as 
, and W<
.
Consider a simple radio receiver. It consists of an antenna, an oscillatory circuit with a variable capacitor, a detector diode, a resistor, and a telephone. The frequency of the oscillatory circuit is selected in such a way that it coincides with the carrier frequency, while the amplitude of oscillations on the capacitor becomes maximum. This allows you to select the desired frequency from all received. From the circuit, modulated high-frequency oscillations arrive at the detector. After passing the detector, the current charges the capacitor every half cycle, and the next half cycle, when no current passes through the diode, the capacitor discharges through the resistor. (Did I get it right???).
64. Analogy between mechanical and electrical vibrations.
Analogies between mechanical and electrical vibrations look like this:
Coordinate | |||
Speed | Current strength | ||
Acceleration | Current change rate | ||
Inductance | |||
Rigidity | Value, reciprocal electrical capacity | ||
Voltage | |||
Viscosity | Resistance | ||
Potential energy deformed spring | Electric field energy capacitor | ||
Kinetic energy, where . 65. Scale of electromagnetic radiation. Dependence of properties of electromagnetic radiation on frequency. The use of electromagnetic radiation. The range of electromagnetic waves with a length of 10 -6 m to m is radio waves. They are used for television and radio communications. Lengths from 10 -6 m to 780 nm are infrared waves. Visible light - from 780 nm to 400 nm. Ultraviolet radiation - from 400 to 10 nm. Radiation in the range from 10 nm to 10 pm is X-ray radiation. Smaller wavelengths correspond to gamma radiation. (Application???). The shorter the wavelength (hence the higher the frequency), the less waves are absorbed by the medium. 65. Rectilinear propagation of light. The speed of light. Laws of reflection and refraction of light. The straight line that indicates the direction of light propagation is called a light beam. At the boundary of two media, light can be partially reflected and propagated in the first medium in a new direction, and also partially pass through the boundary and propagate in the second medium. The incident, reflected, and perpendicular to the boundary of two media, reconstructed at the point of incidence, lie in the same plane. The angle of reflection is equal to the angle of incidence. This law coincides with the law of reflection of waves of any nature and is proved by Huygens' principle. When light passes through the interface between two media, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant value for these two media.<рисунок>. Value n called the index of refraction. The refractive index of a medium relative to vacuum is called the absolute refractive index of that medium. When observing the effect of refraction, it can be seen that in the case of a transition of a medium from an optically denser medium to a less dense one, with a gradual increase in the angle of incidence, it is possible to achieve such a value that the angle of refraction becomes equal to . In this case, equality is fulfilled. The angle of incidence a 0 is called the limiting angle of total reflection. At angles greater than a 0 , total reflection occurs. 66. Lens, imaging. lens formula. A lens is a transparent body bounded by two spherical surfaces. A lens that is thicker at the edges than in the middle is called concave, and thicker in the middle is called convex. The straight line passing through the centers of both spherical surfaces of the lens is called the main optical axis of the lens. If the thickness of the lens is small, then we can say that the main optical axis intersects with the lens at one point, called the optical center of the lens. The straight line passing through the optical center is called the secondary optical axis. If a beam of light parallel to the main optical axis is directed to the lens, then the beam will be collected at the point near the convex lens F. In the lens formula, the distance from the lens to the virtual image is considered negative. The optical power of a biconvex (and indeed any) lens is determined from the radius of its curvature and the refractive index of glass and air 66. Coherence. Interference of light and its application in technology. Diffraction of light. Diffraction grating. In the phenomena of diffraction and interference, the wave properties of light are observed. Two light frequencies whose phase difference is equal to zero are called coherent to each other. During interference - the addition of coherent waves - a time-stable interference pattern of maxima and minima of illumination arises. With a path difference, an interference maximum occurs, at 67. Dispersion of light. The spectrum of electromagnetic radiation. Spectroscopy. Spectral analysis. Sources of radiation and types of spectra. A narrow parallel beam of white light, when passing through a prism, decomposes into beams of light of different colors. The color band visible in this case is called the continuous spectrum. The phenomenon of the dependence of the speed of light on the wavelength (frequency) is called the dispersion of light. This effect is explained by the fact that white light consists of EM waves of different wavelengths, on which the refractive index depends. It has the greatest value for the shortest wave - violet, the smallest - for red. In a vacuum, the speed of light is the same regardless of its frequency. If the source of the spectrum is a rarefied gas, then the spectrum has the form of narrow lines on a black background. Compressed gases, liquids, and solids emit a continuous spectrum, where colors blend seamlessly into each other. The nature of the appearance of the spectrum is explained by the fact that each element has its own specific set of the emitted spectrum. This property allows the use of spectral analysis to identify the chemical composition of a substance. A spectroscope is a device that is used to study the spectral composition of light emitted by a certain source. The decomposition is performed using a diffraction grating (better) or a prism; quartz optics are used to study the ultraviolet region. 68. Photoelectric effect and its laws. quanta of light. Einstein's equation for the photoelectric effect. Application of the photoelectric effect in technology. The phenomenon of pulling out electrons from solid and liquid bodies under the influence of light is called the external photoelectric effect, and the electrons pulled out in this way are called photoelectrons. The laws of the photoelectric effect were experimentally established - the maximum speed of photoelectrons is determined by the frequency of light and does not depend on its intensity, for each substance there is its own red border of the photoelectric effect, i.e. such a frequency n min at which the photoelectric effect is still possible, the number of photoelectrons torn out per second is directly proportional to the light intensity. The inertia of the photoelectric effect is also established - it occurs instantly after the start of illumination, provided that the red border is exceeded. The explanation of the photoelectric effect is possible with the help of quantum theory, which asserts the discreteness of energy. An electromagnetic wave, according to this theory, consists of separate portions - quanta (photons). When absorbing a quantum of energy, a photoelectron acquires kinetic energy, which can be found from the Einstein equation for the photoelectric effect 69. Rutherford's experiments on the scattering of alpha particles. Nuclear model of the atom. Bohr's quantum postulates. The first model of the structure of the atom belongs to Thomson. He suggested that the atom is a positively charged ball, inside which are blotches of negatively charged electrons. Rutherford conducted an experiment on depositing fast alpha particles on a metal plate. At the same time, it was observed that some of them slightly deviated from rectilinear propagation, and some of them deviated by angles greater than 2 0 . This was explained by the fact that the positive charge in the atom is not contained uniformly, but in a certain volume, much smaller than the size of the atom. This central part was called the nucleus of the atom, where the positive charge and almost all the mass are concentrated. The radius of the atomic nucleus has dimensions of the order of 10 -15 m. Rutherford also proposed the so-called. planetary model of the atom, according to which electrons revolve around the atom like planets around the sun. The radius of the farthest orbit = the radius of the atom. But this model contradicted electrodynamics, because accelerated motion (including electrons in a circle) is accompanied by the emission of EM waves. Consequently, the electron gradually loses its energy and must fall onto the nucleus. In reality, neither emission nor fall of an electron occurs. N. Bohr gave an explanation for this, putting forward two postulates - an atomic system can only be in certain certain states in which there is no light emission, although the movement is accelerated, and during the transition from one state to another, either absorption or emission of a quantum occurs according to the law where is Planck's constant. Various possible stationary states are determined from the relation 70. Emission and absorption of light by atoms. Laser. Atoms can spontaneously emit light quanta, while it passes incoherently (because each atom emits independently of the others) and is called spontaneous. The transition of an electron from the upper level to the lower one can occur under the influence of an external electromagnetic field with a frequency equal to the transition frequency. Such radiation is called stimulated (induced). Those. as a result of the interaction of an excited atom with a photon of the corresponding frequency, there is a high probability of the appearance of two identical photons with the same direction and frequency. A feature of stimulated emission is that it is monochromatic and coherent. This property is the basis for the operation of lasers (optical quantum generators). In order for a substance to amplify the light passing through it, it is necessary that more than half of its electrons be in an excited state. Such a state is called a state with an inverse level population. In this case, the absorption of photons will occur less frequently than the emission. For the operation of a laser on a ruby rod, the so-called. pump lamp, the meaning of which is to create an inverse population. In this case, if one atom passes from the metastable state to the ground state, then a chain reaction of photon emission will occur. With an appropriate (parabolic) shape of the reflecting mirror, it is possible to create a beam in one direction. Complete illumination of all excited atoms occurs in 10 -10 s, so the laser power reaches billions of watts. There are also lasers on gas lamps, the advantage of which is the continuity of radiation. 70. The composition of the nucleus of an atom. Isotopes. Binding energy of atomic nuclei. Nuclear reactions. Electric charge of an atom nucleus q is equal to the product of the elementary electric charge e to serial number Z chemical element in the periodic table. Atoms that have the same structure have the same electron shell and are chemically indistinguishable. Nuclear physics uses its own units of measurement. 1 fermi - 1 femtometer, . 1 atomic mass unit is 1/12 of the mass of a carbon atom. . Atoms with the same nuclear charge but different masses are called isotopes. Isotopes differ in their spectra. The nucleus of an atom is made up of protons and neutrons. The number of protons in the nucleus is equal to the charge number Z, the number of neutrons is the mass minus the number of protons A–Z=N. The positive charge of the proton is numerically equal to the charge of the electron, the mass of the proton is 1.007 amu. The neutron has no charge and has a mass of 1.009 amu. (a neutron is heavier than a proton by more than two electron masses). Neutrons are stable only in the composition of atomic nuclei; in a free form, they live for ~15 minutes and decay into a proton, an electron, and an antineutrino. The force of gravitational attraction between nucleons in the nucleus exceeds the electrostatic force of repulsion by 10 36 times. The stability of nuclei is explained by the presence of special nuclear forces. At a distance of 1 fm from the proton, the nuclear forces are 35 times higher than the Coulomb ones, but they decrease very quickly, and at a distance of about 1.5 fm they can be neglected. Nuclear forces do not depend on whether the particle has a charge. Accurate measurements of the masses of atomic nuclei showed the existence of a difference between the mass of the nucleus and the algebraic sum of the masses of its constituent nucleons. It takes energy to split an atomic nucleus into its constituents. The quantity is called the mass defect. The minimum energy that must be expended on the division of the nucleus into its constituent nucleons is called the binding energy of the nucleus, expended on doing work against the nuclear forces of attraction. The ratio of the binding energy to the mass number is called the specific binding energy. A nuclear reaction is the transformation of the original atomic nucleus, when interacting with any particle, into another, different from the original one. As a result of a nuclear reaction, particles or gamma rays can be emitted. There are two types of nuclear reactions - for the implementation of some it is necessary to expend energy, for others, energy is released. The released energy is called the output of a nuclear reaction. In nuclear reactions, all conservation laws are satisfied. The law of conservation of angular momentum takes the form of the law of conservation of spin. 71. Radioactivity. Types of radioactive radiation and their properties. Nuclei have the ability to spontaneously decay. In this case, only those nuclei are stable that have a minimum energy compared to those into which the nucleus can spontaneously turn. Nuclei, in which there are more protons than neutrons, are unstable, because the Coulomb repulsive force increases. Nuclei with more neutrons are also unstable, because the mass of a neutron is greater than the mass of a proton, and an increase in mass leads to an increase in energy. Nuclei can be released from excess energy either by fission into more stable parts (alpha decay and fission), or by a change in charge (beta decay). Alpha decay is the spontaneous fission of an atomic nucleus into an alpha particle and a product nucleus. All elements heavier than uranium undergo alpha decay. The ability of an alpha particle to overcome the attraction of the nucleus is determined by the tunnel effect (Schrödinger equation). During alpha decay, not all of the energy of the nucleus is converted into the kinetic energy of the movement of the product nucleus and the alpha particle. Part of the energy can go to the excitation of the product nucleus atom. Thus, some time after the decay, the core of the product emits several gamma quanta and returns to its normal state. There is also another type of decay - spontaneous nuclear fission. The lightest element capable of such decay is uranium. The decay occurs according to the law, where T is the half-life, a constant for a given isotope. Beta decay is the spontaneous transformation of an atomic nucleus, as a result of which its charge increases by one due to the emission of an electron. But the mass of a neutron exceeds the sum of the masses of a proton and an electron. This is due to the release of another particle - an electron antineutrino 72. Methods of registration of ionizing radiation. The photoemulsion method is to attach a sample to a photographic plate, and after development, it is possible to determine the amount and distribution of a particular radioactive substance in the sample by the thickness and length of the particle trace on it. A scintillation counter is a device in which one can observe the transformation of the kinetic energy of a fast particle into the energy of a light flash, which, in turn, initiates a photoelectric effect (an electric current pulse), which is amplified and recorded. A cloud chamber is a glass chamber filled with air and supersaturated alcohol vapors. When a particle moves through the chamber, it ionizes molecules around which condensation immediately begins. The chain of droplets formed as a result forms a particle track. The bubble chamber works on the same principles, but the registrar is a liquid close to the boiling point. Gas-discharge counter (Geiger counter) - a cylinder filled with rarefied gas and a stretched thread from a conductor. The particle causes gas ionization, ions under the action of an electric field diverge to the cathode and anode, ionizing other atoms along the way. A corona discharge occurs, the impulse of which is recorded. 73. Chain reaction of fission of uranium nuclei. In the 1930s, it was experimentally established that when uranium is irradiated with neutrons, lanthanum nuclei are formed, which could not be formed as a result of alpha or beta decay. The uranium-238 nucleus consists of 82 protons and 146 neutrons. When fission exactly in half, praseodymium should have been formed, but in the stable nucleus of praseodymium there are 9 fewer neutrons. Therefore, during the fission of uranium, other nuclei and an excess of free neutrons are formed. In 1939, the first artificial fission of the uranium nucleus was carried out. In this case, 2-3 free neutrons and 200 MeV of energy were released, and about 165 MeV was released in the form of the kinetic energy of fragment nuclei or or . Under favorable conditions, the released neutrons can cause fission of other uranium nuclei. The neutron multiplication factor characterizes how the reaction will proceed. If it is more than one. then with each fission the number of neutrons increases, uranium is heated to a temperature of several million degrees, and a nuclear explosion occurs. When the division coefficient is less than one, the reaction decays, and when it is equal to one, it is maintained at a constant level, which is used in nuclear reactors. Of the natural isotopes of uranium, only the nucleus is capable of fission, and the most common isotope absorbs a neutron and turns into plutonium according to the scheme. Plutonium-239 is similar in properties to uranium-235. 74. Nuclear reactor. thermonuclear reaction. There are two types of nuclear reactors - slow and fast neutrons. Most of the neutrons released during fission have an energy of the order of 1-2 MeV and a velocity of about 10 7 m/s. Such neutrons are called fast, and are equally effectively absorbed by both uranium-235 and uranium-238, and since. there is more heavy isotope, but it does not divide, then the chain reaction does not develop. Neutrons moving at speeds of about 2×10 3 m/s are called thermal neutrons. Such neutrons are absorbed more actively than fast neutrons by uranium-235. Thus, in order to carry out a controlled nuclear reaction, it is necessary to slow down neutrons to thermal velocities. The most common moderators in reactors are graphite, ordinary and heavy water. Absorbers and reflectors are used to keep the division factor at unity. Absorbers are rods of cadmium and boron, capturing thermal neutrons, reflector - beryllium. If uranium enriched with an isotope with a mass of 235 is used as fuel, then the reactor can operate without a moderator on fast neutrons. In such a reactor, most of the neutrons are absorbed by uranium-238, which through two beta decays becomes plutonium-239, which is also nuclear fuel and source material for nuclear weapons. Thus, a fast neutron reactor is not only a power plant, but also a breeder of fuel for the reactor. The disadvantage is the need to enrich uranium with a light isotope. Energy in nuclear reactions is released not only due to the fission of heavy nuclei, but also due to the combination of light ones. To join the nuclei, it is necessary to overcome the Coulomb repulsive force, which is possible at a plasma temperature of about 10 7 -10 8 K. An example of a thermonuclear reaction is the synthesis of helium from deuterium and tritium or 75. Biological effect of ionizing radiation. Radiation protection. The use of radioactive isotopes. The measure of the impact of any type of radiation on a substance is the absorbed dose of radiation. The unit of dose is the gray, which is equal to the dose with which 1 joule of energy is transferred to an irradiated substance with a mass of 1 kg. Because the physical effect of any radiation on a substance is associated not so much with heating as with ionization, then a unit of exposure dose was introduced, which characterizes the ionization effect of radiation on air. The off-system unit of the exposure dose is the roentgen, equal to 2.58×10 -4 C/kg. At an exposure dose of 1 roentgen, 1 cm 3 of air contains 2 billion pairs of ions. With the same absorbed dose, the effect of different types of radiation is not the same. The heavier the particle, the stronger its effect (however, it is heavier and easier to detain). The difference in the biological effect of radiation is characterized by a biological efficiency coefficient equal to unity for gamma rays, 3 for thermal neutrons, 10 for neutrons with an energy of 0.5 MeV. The dose multiplied by the coefficient characterizes the biological effect of the dose and is called the equivalent dose, measured in sieverts. The main mechanism of action on the body is ionization. Ions enter into a chemical reaction with the cell and disrupt its activity, which leads to cell death or mutation. Natural background exposure is on average 2 mSv per year, for cities additionally +1 mSv per year. 76. Absoluteness of the speed of light. Service station elements. Relativistic dynamics. Empirically, it was found that the speed of light does not depend on which frame of reference the observer is in. It is also impossible to accelerate any elementary particle, such as an electron, to a speed equal to the speed of light. The contradiction between this fact and Galileo's principle of relativity was resolved by A. Einstein. The basis of his [special] theory of relativity was made up of two postulates: any physical processes proceed in the same way in different inertial frames of reference, the speed of light in vacuum does not depend on the speed of the light source and the observer. The phenomena described by the theory of relativity are called relativistic. In the theory of relativity, two classes of particles are introduced - those that move with velocities less than from, and with which the reference system can be associated, and those that move with velocities equal to from, with which reference systems cannot be associated. Multiplying this inequality () by , we get . This expression is a relativistic law of addition of velocities, coinciding with Newton's at v< Own time, i.e. the one that acts in the frame of reference associated with the particle is invariant, i.e. does not depend on the choice of inertial frame of reference. The principle of relativity modifies this statement, saying that in each inertial frame of reference time flows in the same way, but there is no single, absolute time for all. Coordinate time is related to proper time by the law 77. Elementary particles. Initially, the elementary particles included the proton, neutron and electron, later - the photon. When the neutron decay was discovered, muons and pions were added to the number of elementary particles. Their mass ranged from 200 to 300 electron masses. Despite the fact that the neutron decays into a flow, an electron and a neutrino, these particles do not exist inside it, and it is considered an elementary particle. Most elementary particles are unstable and have half-lives of the order of 10 -6 -10 -16 s. In Dirac's relativistic theory of the motion of an electron in an atom, it followed that an electron could have a twin with the opposite charge. This particle, found in cosmic radiation, is called a positron. Subsequently, it was proved that all particles have their own antiparticles, which differ in spin and (if any) charge. There are also truly neutral particles that completely coincide with their antiparticles (pi-null-meson and eta-null-meson). The phenomenon of annihilation is the mutual destruction of two antiparticles with the release of energy, for example In total, there are 4 types of fundamental (irreducible to others) interactions - gravitational, electromagnetic, weak and strong. The electromagnetic interaction is explained by the exchange of virtual photons (From the Heisenberg uncertainty it follows that in a short time, an electron, due to its internal energy, can release a quantum, and compensate for the loss of energy by capturing the same. The emitted quantum is absorbed by another, thus providing interaction.), strong - by the exchange of gluons (spin 1, mass 0, carry the "color" quark charge), weak - vector bosons. The gravitational interaction is not explained, but the quanta of the gravitational field should theoretically have mass 0, spin 2 (???).
|
.
- minimum. The phenomenon of light deflection from rectilinear propagation when passing through the edge of an obstacle is called light diffraction. This phenomenon is explained by the Huygens-Fresnel principle: a disturbance at any point is the result of the interference of secondary waves emitted by each element of the wave surface. Diffraction is used in spectral instruments. An element of these devices is a diffraction grating, which is a transparent plate with a system of opaque parallel stripes deposited on it, located at a distance d from each other. Let a monochromatic wave be incident on the grating. As a result of diffraction from each slit, light propagates not only in the original direction, but also in all others. If a lens is placed behind the grating, then in the focal plane, parallel rays from all the slits will gather into one strip. Parallel rays go with a path difference. When the path difference is equal to an integer number of waves, an interference maximum of light is observed. For each wavelength, the maximum condition is satisfied for its own value of the angle j, so the grating decomposes white light into a spectrum. The longer the wavelength, the larger the angle.
, where A 0 is the work function, the parameter of the substance. The number of photoelectrons leaving the metal surface is proportional to the number of electrons, which, in turn, depends on the illumination (light intensity).
, where n is an integer. For the motion of an electron in a circle in a hydrogen atom, the following expression is true: the Coulomb force of interaction with the nucleus. From here. Those. in view of Bohr's postulate of energy quantization, motion is possible only along stationary circular orbits, the radii of which are defined as . All states, except for one, are conditionally stationary, and only in one - the ground state, in which the electron has a minimum energy reserve - can an atom stay for an arbitrarily long time, and the remaining states are called excited.
. Not only the neutron can decay. A free proton is stable, but when exposed to particles, it can decay into a neutron, positron, and neutrino. If the energy of the new nucleus is less, then positron beta decay occurs. 
. Like alpha decay, beta decay can also be accompanied by gamma radiation.
. The synthesis of 1 gram of helium releases energy equivalent to burning 10 tons of diesel fuel. A controlled thermonuclear reaction is possible by heating it to an appropriate temperature by passing an electric current through it or by using a laser.
. By squaring this expression, we get . the value s called an interval. A consequence of the relativistic law of velocity addition is the Doppler effect, which characterizes the change in the oscillation frequency depending on the velocities of the wave source and the observer. When the observer moves at an angle Q to the source, the frequency changes according to the law 
. When moving away from the source, the spectrum shifts to lower frequencies corresponding to a longer wavelength, i.e. to red, when approaching - to purple. The momentum also changes at speeds close to from:
.
. According to the law of conservation of energy, the released energy is proportional to the sum of the masses of annihilated particles. According to the conservation laws, particles never appear singly. Particles are divided into groups, in order of increasing mass - photon, leptons, mesons, baryons.To describe the movement of a body, you need to know how its various points move. However, in the case of translational motion, all points of the body move in the same way. Therefore, to describe the translational motion of a body, it is sufficient to describe the motion of one of its points.
Also, in many problems of mechanics, there is no need to indicate the positions of individual parts of the body. If the dimensions of the body are small compared to the distances to other bodies, then this body can be described as a point.
DEFINITION
material point is called a body whose dimensions under given conditions can be neglected.
The word "material" emphasizes here the difference between this point and the geometric one. A geometric point does not have any physical properties. A material point can have mass, electric charge and other physical characteristics.
One and the same body can be considered a material point under certain conditions, but not under others. So, for example, considering the movement of a ship from one seaport to another, the ship can be considered a material point. However, when studying the motion of a ball that rolls along the deck of a ship, the ship cannot be considered a material point. The movement of a hare running away from a wolf through the forest can be described by taking the hare as a material point. But you can not consider the hare as a material point, describing his attempts to hide in a hole. When studying the motion of planets around the Sun, they can be described by material points, and with a daily rotation of planets around their axis, such a model is not applicable.
It is important to understand that material points do not exist in nature. A material point is an abstraction, a model for describing motion.
Examples of solving problems on the topic "Material point"
EXAMPLE 1
EXAMPLE 2
| The task | Indicate in which of the following cases the body under study can be taken as a material point: a) the pressure of the tractor on the ground is calculated; b) calculate the height to which the rocket has risen; c) calculate the work when lifting a floor slab of a known mass to a given height in a horizontal position; d) determine the volume of the steel ball using a measuring cylinder (beaker). |
| Answer | a) when calculating the pressure of the tractor on the ground, the tractor cannot be taken as a material point, since in this case it is important to know the surface area of the tracks; b) when calculating the height of the rocket, the rocket can be considered a material point, since the rocket moves forward and the distance traveled by the rocket. much larger than its size; c) in this case, the floor slab can be considered a material point. since it makes a translational motion and to solve the problem it is enough to know the displacement of its center of mass; d) when determining the volume of the ball. the ball cannot be considered a material point, because the size of the ball is essential in this problem. |
EXAMPLE 3
| The task | Is it possible to take the Earth as a material point when calculating: a) the distance from the Earth to the Sun; b) the path traveled by the Earth in its orbit around the Sun; c) the length of the Earth's equator; d) the speed of movement of the equator point during the daily rotation of the Earth around its axis; e) the speed of the Earth in its orbit around the Sun? |
| Answer | a) under these conditions, the Earth can be taken as a material point, since its dimensions are much smaller than the distance from it to the Sun; e) in this case, the Earth can be taken as a material point, since the dimensions of the orbit are much larger than the dimensions of the Earth. |
Material point
Material point(particle) - the simplest physical model in mechanics - an ideal body, the dimensions of which are equal to zero, one can also consider the dimensions of the body to be infinitely small compared to other dimensions or distances within the assumptions of the problem under study. The position of a material point in space is defined as the position of a geometric point.
In practice, a material point is understood as a body with mass, the size and shape of which can be neglected when solving this problem.
With a rectilinear motion of a body, one coordinate axis is sufficient to determine its position.
Peculiarities
The mass, position and speed of a material point at each particular moment of time completely determine its behavior and physical properties.
Consequences
Mechanical energy can be stored by a material point only in the form of the kinetic energy of its movement in space, and (or) the potential energy of interaction with the field. This automatically means that a material point is incapable of deformation (only an absolutely rigid body can be called a material point) and rotation around its own axis and changes in the direction of this axis in space. At the same time, the model of body motion described by a material point, which consists in changing its distance from some instantaneous center of rotation and two Euler angles , which set the direction of the line connecting this point with the center, is extremely widely used in many branches of mechanics.
Restrictions
The limitations of the application of the concept of a material point can be seen from this example: in a rarefied gas at high temperature, the size of each molecule is very small compared to the typical distance between molecules. It would seem that they can be neglected and the molecule can be considered a material point. However, this is not always the case: vibrations and rotations of a molecule are an important reservoir of the "internal energy" of the molecule, the "capacity" of which is determined by the size of the molecule, its structure and chemical properties. In a good approximation, a monatomic molecule (inert gases, metal vapors, etc.) can sometimes be considered as a material point, but even in such molecules at a sufficiently high temperature, excitation of electron shells is observed due to molecular collisions, followed by emission.
Notes
Wikimedia Foundation. 2010 .
- mechanical movement
- Absolutely rigid body
See what "Material point" is in other dictionaries:
MATERIAL POINT is a point with mass. In mechanics, the concept of a material point is used in cases where the dimensions and shape of a body do not play a role in studying its motion, but only the mass is important. Almost any body can be considered as a material point, if ... ... Big Encyclopedic Dictionary
MATERIAL POINT- a concept introduced in mechanics to designate an object, which is considered as a point having a mass. The position of M. t. in the right is defined as the position of the geom. points, which greatly simplifies the solution of problems in mechanics. In practice, the body can be considered ... ... Physical Encyclopedia
material point- A point with mass. [Collection of recommended terms. Issue 102. Theoretical Mechanics. USSR Academy of Sciences. Committee of Scientific and Technical Terminology. 1984] Topics theoretical mechanics EN particle DE materialle Punkt FR point matériel … Technical Translator's Handbook
MATERIAL POINT Modern Encyclopedia
MATERIAL POINT- In mechanics: an infinitely small body. Dictionary of foreign words included in the Russian language. Chudinov A.N., 1910 ... Dictionary of foreign words of the Russian language
Material point- MATERIAL POINT, a concept introduced in mechanics to designate a body, the size and shape of which can be neglected. The position of a material point in space is defined as the position of a geometric point. The body can be considered material ... ... Illustrated Encyclopedic Dictionary
material point- a concept introduced in mechanics for an object of infinitesimal size, having a mass. The position of a material point in space is defined as the position of a geometric point, which simplifies the solution of problems in mechanics. Almost any body can ... ... encyclopedic Dictionary
Material point- geometric point with mass; material point is an abstract image of a material body that has mass and does not have dimensions ... Beginnings of modern natural science
material point- materialusis taškas statusas T sritis fizika atitikmenys: angl. mass point; material point vok. Massenpunkt, m; materieller Punkt, m rus. material point, f; point mass, fpranc. point mass, m; point matériel, m … Fizikos terminų žodynas
material point- A point with a mass ... Polytechnic terminological explanatory dictionary
Books
- A set of tables. Physics. Grade 9 (20 tables), . Educational album of 20 sheets. Material point. moving body coordinates. Acceleration. Newton's laws. The law of universal gravitation. Rectilinear and curvilinear motion. Body movement along...
Definition
A material point is a macroscopic body whose dimensions, shape, rotation and internal structure can be neglected when describing its motion.
The question of whether a given body can be considered as a material point does not depend on the size of this body, but on the conditions of the problem being solved. For example, the radius of the Earth is much less than the distance from the Earth to the Sun, and its orbital motion can be well described as the motion of a material point with a mass equal to the mass of the Earth and located in its center. However, when considering the daily motion of the Earth around its own axis, replacing it with a material point does not make sense. The applicability of the material point model to a specific body depends not so much on the size of the body itself, but on the conditions of its motion. In particular, in accordance with the theorem on the motion of the center of mass of a system during translational motion, any rigid body can be considered a material point, the position of which coincides with the center of mass of the body.
The mass, position, speed and some other physical properties of a material point at any particular moment of time completely determine its behavior.
The position of a material point in space is defined as the position of a geometric point. In classical mechanics, the mass of a material point is assumed to be constant in time and independent of any features of its motion and interaction with other bodies. In the axiomatic approach to the construction of classical mechanics, the following is accepted as one of the axioms:
Axiom
A material point is a geometric point that is associated with a scalar called mass: $(r,m)$, where $r$ is a vector in the Euclidean space referred to some Cartesian coordinate system. The mass is assumed to be constant, independent of either the position of the point in space or time.
Mechanical energy can be stored by a material point only in the form of the kinetic energy of its movement in space and (or) the potential energy of interaction with the field. This automatically means that a material point is incapable of deformation (only an absolutely rigid body can be called a material point) and rotation around its own axis and changes in the direction of this axis in space. At the same time, the model of body motion described by a material point, which consists in changing its distance from some instantaneous center of rotation and two Euler angles that set the direction of the line connecting this point with the center, is extremely widely used in many branches of mechanics.
The method of studying the laws of motion of real bodies by studying the motion of an ideal model - a material point - is the main one in mechanics. Any macroscopic body can be represented as a set of interacting material points g, with masses equal to the masses of its parts. The study of the motion of these parts is reduced to the study of the motion of material points.
The limitations of the application of the concept of a material point can be seen from this example: in a rarefied gas at high temperature, the size of each molecule is very small compared to the typical distance between molecules. It would seem that they can be neglected and the molecule can be considered a material point. However, this is not always the case: vibrations and rotations of a molecule are an important reservoir of the "internal energy" of the molecule, the "capacity" of which is determined by the size of the molecule, its structure and chemical properties. In a good approximation, a monatomic molecule (inert gases, metal vapors, etc.) can sometimes be considered as a material point, but even in such molecules at a sufficiently high temperature, excitation of electron shells due to molecular collisions is observed, followed by emission.
Exercise 1
a) a car entering the garage;
b) a car on the Voronezh - Rostov highway?
a) a car entering the garage cannot be taken as a material point, since under these conditions the dimensions of the car are significant;
b) a car on the Voronezh-Rostov highway can be taken as a material point, since the dimensions of the car are much smaller than the distance between cities.
Can it be taken as a material point:
a) a boy who walks 1 km on his way home from school;
b) a boy doing exercises.
a) When a boy, returning from school, walks a distance of 1 km to the house, then the boy in this movement can be considered as a material point, because his size is small compared to the distance he walks.
b) when the same boy does morning exercises, then he cannot be considered a material point.
The concept of a material point. Trajectory. Path and movement. Reference system. Velocity and acceleration in curvilinear motion. Normal and tangential accelerations. Classification of mechanical movements.
The subject of mechanics . Mechanics is a branch of physics devoted to the study of the laws of the simplest form of motion of matter - mechanical motion.
Mechanics consists of three subsections: kinematics, dynamics and statics.
Kinematics studies the motion of bodies without taking into account the causes that cause it. It operates with such quantities as displacement, distance traveled, time, speed and acceleration.
Dynamics explores the laws and causes that cause the movement of bodies, i.e. studies the motion of material bodies under the action of forces applied to them. To the kinematic quantities are added quantities - force and mass.
INstatic investigate the equilibrium conditions for a system of bodies.
Mechanical movement a body is the change in its position in space relative to other bodies over time.
Material point - a body, the size and shape of which can be neglected under the given conditions of motion, considering the mass of the body concentrated at a given point. The material point model is the simplest model of body motion in physics. A body can be considered a material point when its dimensions are much smaller than the characteristic distances in the problem.
To describe the mechanical movement, it is necessary to indicate the body relative to which the movement is considered. An arbitrarily chosen motionless body, in relation to which the motion of this body is considered, is called reference body .
Reference system - the reference body together with the coordinate system and clock associated with it.
Consider the motion of a material point M in a rectangular coordinate system, placing the origin at point O.
The position of the point M relative to the reference system can be set not only with the help of three Cartesian coordinates, but also with the help of one vector quantity - the radius vector of the point M drawn to this point from the origin of the coordinate system (Fig. 1.1). If are unit vectors (orts) of the axes of a rectangular Cartesian coordinate system, then
or the time dependence of the radius vector of this point
Three scalar equations (1.2) or one vector equation (1.3) equivalent to them are called kinematic equations of motion of a material point .
trajectory a material point is a line described in space by this point during its movement (the locus of the ends of the radius vector of the particle). Depending on the shape of the trajectory, rectilinear and curvilinear motions of a point are distinguished. If all parts of the trajectory of the point lie in the same plane, then the movement of the point is called flat.
Equations (1.2) and (1.3) define the trajectory of a point in the so-called parametric form. The role of the parameter is played by time t. Solving these equations jointly and excluding the time t from them, we find the trajectory equation.
long way material point is the sum of the lengths of all sections of the trajectory traversed by the point during the considered period of time.
Displacement vector material point is a vector connecting the initial and final position of the material point, i.e. increment of the radius-vector of a point for the considered time interval
|
|
With rectilinear motion, the displacement vector coincides with the corresponding section of the trajectory. From the fact that displacement is a vector, the law of independence of motions, which is confirmed by experience, follows: if a material point participates in several motions, then the resulting displacement of the point is equal to the vector sum of its displacements performed by it during the same time in each of the movements separately
To characterize the movement of a material point, a vector physical quantity is introduced - speed , a quantity that determines both the speed of movement and the direction of movement at a given time.
Let a material point move along a curvilinear trajectory MN so that at time t it is at point M, and at time at point N. The radius vectors of points M and N, respectively, are equal, and the length of the arc MN is (Fig. 1.3 ).
Average speed vector points in the time interval from t before t+Δ t called the ratio of the increment of the radius-vector of a point over this period of time to its value:
The average velocity vector is directed in the same way as the displacement vector i.e. along the chord MN.
Instantaneous speed or speed at a given time . If in expression (1.5) we pass to the limit, tending to zero, then we will obtain an expression for the velocity vector of the m.t. at the time t of its passage through the t.M trajectory.
|
|
In the process of decreasing the value, the point N approaches t.M, and the chord MN, turning around t.M, in the limit coincides in direction with the tangent to the trajectory at the point M. Therefore, the vectorand speedvmoving point directed along a tangent trajectory in the direction of motion. The velocity vector v of a material point can be decomposed into three components directed along the axes of a rectangular Cartesian coordinate system.
From a comparison of expressions (1.7) and (1.8), it follows that the projections of the velocity of a material point on the axes of a rectangular Cartesian coordinate system are equal to the first time derivatives of the corresponding coordinates of the point:
A movement in which the direction of the velocity of a material point does not change is called rectilinear. If the numerical value of the instantaneous velocity of a point remains unchanged during the movement, then such movement is called uniform.
If, in arbitrary equal time intervals, a point passes paths of different lengths, then the numerical value of its instantaneous velocity changes over time. Such movement is called uneven.
In this case, a scalar value is often used, called the average ground speed of uneven movement in a given section of the trajectory. It is equal to the numerical value of the speed of such a uniform movement, at which the same time is spent on the passage of the path as with a given uneven movement:
Because only in the case of rectilinear motion with a constant speed in the direction, then in the general case:
The value of the path traveled by a point can be represented graphically by the area of the figure of a bounded curve v = f (t), direct t = t 1 And t = t 1 and the time axis on the speed graph.
The law of addition of speeds . If a material point simultaneously participates in several movements, then the resulting displacement, in accordance with the law of independence of motion, is equal to the vector (geometric) sum of elementary displacements due to each of these movements separately:
According to definition (1.6):
Thus, the speed of the resulting movement is equal to the geometric sum of the velocities of all movements in which the material point participates (this provision is called the law of addition of velocities).
When a point moves, the instantaneous speed can change both in magnitude and in direction. Acceleration characterizes the rate of change in the module and direction of the velocity vector, i.e. change in the magnitude of the velocity vector per unit of time.
Mean acceleration vector . The ratio of the speed increment to the time interval during which this increment occurred expresses the average acceleration:
The vector of the average acceleration coincides in direction with the vector .
Acceleration, or instantaneous acceleration is equal to the limit of the average acceleration when the time interval tends to zero:
|
|
In projections onto the corresponding coordinates of the axis:
In rectilinear motion, the velocity and acceleration vectors coincide with the direction of the trajectory. Consider the motion of a material point along a curvilinear plane trajectory. The velocity vector at any point of the trajectory is directed tangentially to it. Let's assume that in t.M of the trajectory the speed was , and in t.M 1 it became . At the same time, we consider that the time interval during the transition of a point on the way from M to M 1 is so small that the change in acceleration in magnitude and direction can be neglected. In order to find the velocity change vector , it is necessary to determine the vector difference:
To do this, we move it parallel to itself, aligning its beginning with the point M. The difference of two vectors is equal to the vector connecting their ends is equal to the side of the AC MAC, built on the velocity vectors, as on the sides. We decompose the vector into two components AB and AD, and both, respectively, through and . Thus, the velocity change vector is equal to the vector sum of two vectors:
Thus, the acceleration of a material point can be represented as the vector sum of the normal and tangential accelerations of this point 
By definition:
where - ground speed along the trajectory, coinciding with the absolute value of the instantaneous speed at a given moment. The vector of tangential acceleration is directed tangentially to the trajectory of the body.